Quikrete Walk Maker 2 ' X 2 '
- Easy to use, reusable plastic mold featuring a running bond brick pattern.
- Use to create brick patterned walks, paths, patios, courtyards, etc.
- Quikrete fiber-reinforced concrete recommended.
ReviewsConcrete Brick Equipment
Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors
- ✅ 2 Makita 4-1/2” Premium Segmented + Turbo Rim Diamond Blades For FAST & RELIABLE Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
- ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
- ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
- ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blade....
12" Segmented Diamond Saw Blade for Concrete, Brick, Block and Masonry, 12mm Segment Height, 1" Arbor
- MULTIPURPOSE - 12" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
- VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
- SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
Cliplight 979KIT Super Seal HVACR Sealant & Dry R Kit
- Semi-Gloss Shine with high-solids of 25%.
- Protects Brick Pavers and Decorative Concrete.
- Breathable Styrene Acrylic - Will not turn white.
- SuperSeal25 Brick Paver Sealer can be sprayed on with the Chapin 1949 Concrete Sprayer or applied with a 1/2 inches roller cover. It is to thick for a....
Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors
- ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
- ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
- ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
- ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece
- Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
- An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
- Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
- Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 40 65 80 100 125 MM
- The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
- The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
- It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
- The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
- The core drill arbor of the hole saw is designed with SDS PLUS 110mm and SDS MAX 160mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 30 40 65 80 100 MM
- The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
- The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
- It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
- The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
- The core drill arbor of the hole saw is designed with SDS PLUS 300mm and SDS MAX 300mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Toggle Anchor Bolts Hollow Wall Anchors 304 Stainless Steel Scissors Type Heavy Duty X Anchor M8x150mm Pack of 4
- 1. New utility and original design. Compare with traditional anchor fasteners, this kind toggle bolts who fixed objects hardly to fall off and make sure safer and more fastness..
- 2. The specialty of the new toggle bolts is the X shape head (or called scissors head ) who can firmly grasp the inner wall. The X shape head expand like a scissors and provide incredible tensile strength and shear force..
- 3. Easy installation and can be used repeatedly. The new toggle anchor bolts are widely used in indoor and outdoor such as fix bracket, awning, barriers, furniture, equipment etc..
- 4. Beautiful shape and good material. All components are high quality 304 stainless steel and offers rust protection..
- 5. Fit for any concrete, walls, bricks and especially for hollow wall, air brick, foam concrete block and so on..
Mungo MN Nylon Plug Anchor 2 inch Length 3/8 inch Plug and Drill Diameter Box of 50 Premium Grade Anchor for Drywall Brick Concrete and Stone
- load 314 lbs-concrete, 179 lbs-brick, 44 lbs lightweight concrete.
- 2 inch length, 3/8 inch plug and drill diameter, 2-9/16 inch drilling depth.
- Use with Drywall, Concrete, Brick, and Stone.
- Appropriate for wood, particle board, and metric screws. Indoor and outdoor applications.
- -40 degree fahrenheit to 212 degree fahrenheit temperature range.
Tapcon 3/16\ x 1-1/4\ Star Torx Head Concrete Anchor Screws 3169407V2 | 100 Pack | Drill Bit Included
- Tapcon anchors are masonry screws designed with Advanced Threadform Technology which cuts threads into all masonry materials including concrete, block and brick.
- Many applications that include shelving brackets used in electrical equipment, HVAC strapping, 2x4 lumber, wood headers, window frames, jambs & sills, door frames to masonry, plywood backer boards to masonry & exterior installation into masonry.