ReviewsConcrete Brick Machinery

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 40 65 80 100 125 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 110mm and SDS MAX 160mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 30 40 65 80 100 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 300mm and SDS MAX 300mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

Mungo MN Nylon Plug Anchor 2 inch Length 3/8 inch Plug and Drill Diameter Box of 50 Premium Grade Anchor for Drywall Brick Concrete and Stone

  • load 314 lbs-concrete, 179 lbs-brick, 44 lbs lightweight concrete.
  • 2 inch length, 3/8 inch plug and drill diameter, 2-9/16 inch drilling depth.
  • Use with Drywall, Concrete, Brick, and Stone.
  • Appropriate for wood, particle board, and metric screws. Indoor and outdoor applications.
  • -40 degree fahrenheit to 212 degree fahrenheit temperature range.
Check Stock

KSEIBI Variable Speed Rotary Hammer Drill 1-1/4 inch, SDS Plus Demolition Hammer for Concrete Drill 13Amp, 4 Functions Reduced Vibration System

  • MAX POWER PERFORMANCE L-shaped SDS drill with a powerful 13 Amp motor with 7 Joules Impact Rate with SDS Plus function let you finish any projects on Masonry, Concrete, Brick, Stone etc. or you can use the extra chuck for normal shank for metal and wood jobs, 0-900RPM, 0-4350BPM, The Heavy Duty Drill has drilling capacity: 1-1/4 inch for concrete, 1-9/16 inch for wood, 1/2 inch for steel..
  • FOUR FUNCTIONS Use the knob hammer drill switch to switch between Demolition Chisel Hammer Drill to make holes with rotary drill SDS bits, Electric Hammer Chiseling both positions ideal for projects on Concrete, Brick, Granite, etc., and normal Drill Position ideal for drilling and making holes in wood, metal, aluminum, etc. the last function Position Adjustment help you to chose the chisel position makes your job easy, you can use adjust depth gauge to preselect drilling depth for blind holes..
  • VARIABLE SPEED pre-selection speed wheel to set the right speed for every job attached to HEAVY DUTY Soft-grip Handle for comfortable handling and optimal control with Vibration Reduction System ensures optimal working comfort and low vibrations side handle for secure two-handed control and low vibrations while using the electric chisel hammer.
Check Stock

Rotary Hammer Drill Handife 12.5 Amp 1500W Heavy Duty Hammer 1-1/4'' SDS-Plus, 3 Functions 6-Speed Regulation with Vibration Damping Technology, Safety Clutch, Used for Concrete, Metal, and Stone

  • ⚒️【Powful Motor & Adujustable Speed】The heat resistant copper wire motor with 12.5A, 6J impact energy, 4300BPM could provide long working time without burning the machine. 6 adjustable speed (0-900RPM) could meet different work needs, such as concrete, metal, brick, stone and masonry, etc. Handife rotary hammer drill helps you to make an efficient life..
  • ⚒️【Multi-Function & Double Switch Design】Handife rotary hammer drill for concrete has 3 different functions: drilling(suitable for wood, steel , etc.), chiseling(suitable for concrete, marble or brick) , rotary hammer drilling(suitable for heavy duty work). It is easy to switch different function by two different switches, which could extend service life than single switch..
  • ⚒️【Safe and Ergonomic Design】Safety clutch protection designed could provide security if bit jams or high torque force. The integrated anti-vibration system and PU soft grip could decrease the vibration and fatigue. Anti-dust bottom structure and heat dissipation design could extend the rotary hammer’s use life..
  • ⚒️【360° Rotating Handle & SDS-Plus Chuck】Handife hammer drill has a 360° detachable rotating handle for convenient operation.The SDS-Plus chuck can easily and safely replace the drill bit....
Check Stock

CONFAST 3/8 x 6 Flat Sleeve Anchor Zinc Plated 25 per Box

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block.
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials.
  • PRE-ASSEMBLED - Ready to install no separate parts required.
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs.
Check Stock

4-1/2\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

uxcell 10x50mm Plastic Expansion Tube Bolts Column Frame Fixings Gray 24pcs

  • Fit for Screw Dia.(Approx.): 8mm / 0.31".
  • Package Content: 24pcs(+/-2%) x Plastic Expansion Tubes(Screws are not included).
  • Material - Made of plastic, injection , flexible, good toughness, impact resistance, not easy to break, high expansion coefficient..
  • Design - Good elasticity and high tension. The protruding edge can prevent the expansion screw from entering the deep part of the hole due to over-deep making..
  • Advantage - Good anchoring force, large anchorage range, can be used to fix brackets, handrails, shelves, frames, cabinets, mirror frames, coat and hat frames, skirting boards, curtain guide rail, and home decoration etc..
  • Application - Can be commonly applied to solid brick, concrete, aerated concrete, high-hole brick, gypsum board, sand brick and other wall materials..
Check Stock