ReviewsConcrete Lag Bolts

Ashman Ground Screw No Dig, U-Model Screw in Post Stake - 27' Inch Long, Fits Standard 4x4 (3.5' X 3.5' Inch) Great for Mailbox Posts - 2 Pack

  • Accommodates a standard 4x4 wood post (not included).
  • Made of galvanized steel. Heavy duty ground screw..
  • With this Ground Screw set you can realize your next garden construction project easily. It’s perfectly suitable as a fundament for your new terrace or summerhouse. The ready fundament is a simple solution without concrete..
  • Hardware Included: Includes tightening rod and 6 lag bolts (use two bolts on one side and three on the other)..
  • The ground anchor is simply screwed into the ground, deep enough, if need be, so that the lawn mower can glide over it. And when the season is over, it can just as easily be screwed out again..
Check Stock

Hakkin 3/8 Hex Lag Bolts Wood Screws 60PCS Assorted Wood Screw & Bolt Assortment Sets 1-1/2 2 2-1/2 3 3-1/2 4 Hexagon Head Lag Bolts for Wood Decks Building,Industrial

  • 1.【Premiun Material ＆ Mighty Grip】Heavy duty screw bolts are made from 304 stainless steel and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners.These lag bolts for wood is coarse threads for superior holding, will not strip off..
  • 2.【Standard and Various Sizes】The hex lag bolts kit includes 6 different most common used sizes:3/8×1-1/2"，3/8×2"，3/8×2-1/2",3/8×3",3/8×3-1/2",3/8×4".
  • Quantity: 60 pieces screws and washers in total (30 sets)..
  • 3.【Project Center】These stainless steel lag screws are great for exterior household securing wood works industrial applications such as deck building or joining lumber，and DIY design..
  • 4.【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 5.【Guarantee in Hakkin】Hakkin hex lag screws undergo rigorous ins....
Check Stock

HoldRite QuickStand 22 Inch Water Heater Stand, Up to 52 Gallons, Unassembled, 40-S-22-U

  • WATER HEATER STAND: The Holdrite QuickStand Water Heater Stand safely elevates water heaters and other equipment above the floor to prevent gases and other debris from coming into contact with ignition source.
  • WHAT IS INCLUDED: The QuickStand is easy to assemble and includes (2) safety clips and (2) lag bolts.
  • assembled QuickStand measures 22 inches in diameter by 16 inches in height.
  • CONSTRUCTION: Made with galvanized steel, this water heater stand is engineered to support water heaters up to 52 gallons.
  • VERSATILE: This water stand can be installed on concrete or framed walls.
  • can also support other equipment such as tanks, washers, and boilers.
  • CERTIFIED: Water heater stands are compliant with Uniform Plumbing Code and International Plumbing Code requirements.
Check Stock

HoldRite QuickStand 30 Inch Water Heater Stand, Up to 100 Gallons, Unassembled, 40-S-30-U

  • WATER HEATER STAND: The Holdrite QuickStand Water Heater Stand safely elevates water heaters and other equipment above the floor to prevent gases and other debris from coming into contact with ignition source.
  • WHAT IS INCLUDED: The QuickStand is easy to assemble and includes (2) safety clips and (2) lag bolts.
  • assembled QuickStand measures 30 inches in diameter by 16 inches in height.
  • CONSTRUCTION: Made with galvanized steel, this water heater stand is engineered to support water heaters up to 100 gallons.
  • VERSATILE: This water stand can be installed on concrete or framed walls.
  • can also support other equipment such as tanks, washers, and boilers.
  • CERTIFIED: Water heater stands are compliant with Uniform Plumbing Code and International Plumbing Code requirements.
Check Stock

Lag Bolt Kit for Mounting TV Bracket Into Wood Or Concrete - Includes Heavy Duty Bolts Fischer Concrete Anchors and 2 Drill Bits

  • Application: The lag bolt kit is suitable for concrete wall, wood studs and brick wall.
  • Qualtiy: High quality drill bits and screws ensure no stripping,wobble and breaking during the installation.
  • Note: Concrete anchors are not compatible with wood and drywall.
  • Package: The kit includes 4 lag screws, 4 concrete anchors, 4 washers,2 kinds of drill bits.
Check Stock

Mounting Dream Soundbar Mount Sound Bar TV Bracket, Sound Bar Bracket for Soundbar with Holes/Without Holes, Non-Slip Base Holder Extends 3.4\ to 6.1\

  • COMPATIBILITY: Our sound bar mount is suitable for most sound bars up to 20 lbs. It is universal for most sound bar with holes/ without holes, and fits most TVs up to 800x400mm. This sound bar bracket fits most fixed, tilt, full motion TV mount..
  • FLEXIBLE HOLDER: The adjustable base holder extends 6.06"and retracts back to 3.44" for fitting different widths of sound bars, compatible with Samsung, Yamaha and Vizio sound bars..
  • SOLID LOCKING MECHANISM: The sound bar TV wall mount applies the safety bolts to lock the extendable holder, with special material on the bracket to ensure the sound bar not waggle..
  • EASY INSTALLATION: Decent instruction and necessary hardware are included. Sound bar can be installed with one horizontal bar if shorter than 34’’ and TV VESA less than 400x400mm..
  • DECENT SERVICE: US professional support team answers pre-purchase and installation problems. Sound bar bracket can be installed onto the wall directly. Lag bolts and concrete anchors will be shipped if needed..
Check Stock

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

  • 【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
  • 【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
  • Length from 1'' to 3''. Thread Type are all Coarse (standard).
  • Quantity: 155 pieces screws and washers. Refer to Figure 2..
  • 【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
  • 【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock

Arrested Development

  • STRONG FIXED ABILITY - Our concrete wall anchors are made of high quailty plastic. Combined with lag bolt sturdily on the concrete or brick wall..
  • WIDE APPLICATION - Need to mount your TV on concrete or brick wall but no anchors? Our anchors for concrete or brick wall can help you..
  • EASY INSTALLATION - With the corresponding hole in the wall, it is easy to hammer the anchor bolt into the wall..
  • BASIC INFORMATION - Rod Diameter: 10mm/3/8”, Total length: 50mm/2”. Package Content: 6 pcs concrete wall anchors in one pack..
  • WORLD-CLASS CUSTOMER SERVICE - Our customer service team is glad to provide support on pre-purchase or installation problems for customers at any time..
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock