ReviewsConduit For Hazardous Areas

Woods Southwire 55094222 Liqua Flex 1/2-Inch by 50-Feet Non-Metallic Liquidtight Flexible Conduit

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1/2-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1/2\ Dia

  • Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 3/4-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 3/4\ Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

RHS Snow Melting System Roof and Valley Heater Ice and Snow Melting Mats Sizes 10 feet x 13 inches Color black 10ft mat melts 2 inches of snow per hour buy factory direct 10 ft x 13 in

  • ...ts associated with water damage caused by the inability of roofs to drain water during winter months..
  • Melts 2 inches of snow per hour, UL listed components are made to sustain the most harsh environments. RHS Valley heaters have a complete waterproof system which serves for the most demanding environments including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern. The valley heaters provides 40 watts per foot at 120 volt..
  • Easy installation, valley heaters are 10 feet length (can be made in 8', 15', and any other size up to 50' ft. for custom orders) roofing grommet screws included with the system are 100% waterproof and easy to insert on the valley heaters..
  • No more clinbing on a ladder to shovel your roof, RHS Valley Heaters go right over the problem areas on the valley, 6.5" inches to one side and 6.5" inches to the other side to completely melt the snow from the valley, just attach the grommet screws at the labeled locations to secure in place and relax, and watch RHS Valley Heaters get the job done..
  • RHS Valley Heater System provides with the most proficient, highly scalable and eco-friendly snow melting solution. Our roof systems are offered for all types of applications, including new construction, remod....
Check Stock

RHS Snow Melting System, Roof and Valley Heater, Ice and Snow Melting Mats, Sizes 5' feet x 13' inches, Color Black, 5 ft. mat Melts 2' inches of Snow per Hour, Buy Factory Direct, (5' ft. x 13' in.)

  • ...ts associated with water damage caused by the inability of roofs to drain water during winter months..
  • Melts 2 inches of snow per hour, UL listed components are made to sustain the most harsh environments. RHS Valley heaters have a complete waterproof system which serves for the most demanding environments including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern. The valley heaters provides 40 watts per foot at 120 volt..
  • Easy installation, valley heaters are 5 feet length (can be made in 8', 10', 15', and any other size up to 50' ft. for custom orders) roofing grommet screws included with the system are 100% waterproof and easy to insert on the valley heaters..
  • No more climbing on a ladder to shovel your roof, RHS Valley Heaters go right over the problem areas on the valley, 6.5" inches to one side and 6.5" inches to the other side to completely melt the snow from the valley, just attach the grommet screws at the labeled locations to secure in place and relax, and watch RHS Valley Heaters get the job done..
  • RHS Valley Heater System provides with the most proficient, highly scalable and eco-friendly snow melting solution. Our roof systems are offered for all types of applications, including new construction, r....
Check Stock

Reflective Driveway Markers, 4ft, 12 Pack, Orange

  • Includes 12 Orange 48-Inch 1/4" Diameter Reflective Driveway Markers.
  • Designed to Last, Constructed of Durable Fiberglass.
  • White Reflective Tape for Day & Night Visibility.
  • Ideal for Marking Driveways, Roadways and Hazardous Areas.
Check Stock

Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included (1/2\ Dia. x 50 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(2\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(1\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock