ReviewsConduit For Marine Applications

Sealproof 1/2-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 1/2\ Dia, 100 Feet, Made in USA

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

IDEAL Electrical 31-057 Blue Steel Fish Tape – 240 ft. Blued Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments

  • Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for electricians for longer conduit runs. It is laser etched in an increment of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
  • Premium Material: the fish tape is made using high-quality of carbon steel that boosts its lifespan, making it reliable for electrical conduit runs.
  • Impact Resistant: The Tuff-Grip Pro case and handle are impact resistant, while the unique design keeps the wire inside the case, even after a long fall..
  • Rust Resistant: the wire puller tape has a non-oily blue finish that makes it resistant to rust and corrosion, ensuring safe and smooth operation.
  • Product Specifications: The Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check Stock

Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
  • 0 to 180-Degree range is useful when accounting for kickback in pipe bending applications when bending to 90-Degree or more.
  • Display auto-rotates when upside-down for easy viewing.
Check Stock

IDEAL Electrical 31-06 Stainless Steel Fish Tape – 240 ft. Stainless Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments

  • Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for longer conduit runs. It is laser etched in an increments of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
  • Premium Material: the fish tape is made using high-quality of stainless steel that is resistant to rust and corrosion. This boosts the lifespan of the tape, making it reliable for electrical conduit runs.
  • Impact Resistant: the wire puller tape has a finish that makes it resistant to rust and corrosion. It ensures smooth operation, making it a safe tool for routing the wires abrasive electrical environments.
  • Ergonomic Design: the replacement fish tape is carefully designed to keep the wires holstered within the case after a long fall. It is straight and stiff that maximize user convenience during the work.
  • Product Specifications: the Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check Stock

3M Performance Plus 8979 Duct Tape Heavy Duty Slate Blue 48 mm x 55 m 12.1 mil 6 Month Clean Removal Resists UV and Weather for up to 12 Months Tears Cleanly Curl-Resistant 1 Roll

  • PROFESSIONAL GRADE SLATE BLUE DUCT TAPE – Outdoor, UV-tolerant duct tape maintains versatile performance when exposed to the elements. Ideal for tough, demanding applications in the construction, electrical, HVAC, industrial, marine and plumbing markets.
  • REMOVES CLEANLY FOR UP TO 6 MONTHS – Whether indoors or outdoors, removes from most opaque surfaces with no adhesive residue for up to six months even after sun and weather exposure.
  • STICKS IMMEDIATELY – Thick rubber adhesive attaches well to masonry and other rough surfaces, while cloth-reinforced backing resists curling and conforms to curved and irregular surfaces.
  • WIDE RANGE OF CONVENIENT SOLUTIONS – Commonly used for sealing and protection, with the high tensile strength needed for heavy bundling, reinforcing, tabbing, taping, capping and splicing of materials including piping, conduit and insulation.
Check Stock

Non-Metallic Liquid Tight Push On Connector Fittings Straight 1-1/4 In Diameter 5-pack

  • Designed for use with type B liquid-tight conduit in corrosive, commercial and residential applications to seal a liquidtight, raintight, or oiltight....
  • Can be used on metallic or non-metallic conduit with a liquid-tight connection.
  • Meets NEC and UL requirements for use in wet locations.
  • UL (514B, 567 - USA) and CUL (C22.2 No. 18F - Canada) Listed and Certified.
Check Stock

Patrick Seeker Presents Intros & FX Presentations DJ Tools

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1/2-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1/2\ Dia

  • Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 3/4-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 3/4\ Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Morris Products 2 Hole EMT Pipe Strap – 1/2 Inch - Secures EMT Conduit - Zinc-Plated Steel - Reinforced Rib, Holes – Snap-On Installation – 100 Pieces

  • SECURE CONDUIT: Ensure that your conduit is safely secure with these 2-hole EMT Pipe Straps that feature reinforced holes and a reinforced rib for extra strength..
  • DURABLE CONSTRUCTION: Morris Products’ EMT Pipe Straps are manufactured from zinc-plated steel for ultimate durability. Each pipe strap is cULus listed..
  • SIZE AND QUANTITY VARIETY: Choose the exact size you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2”. Quantities range from 5 EMT pipe straps to 100 in each pack..
  • SIMPLIFIED INSTALLATION: Take less time to complete each task with the snap-on installation of these EMT pipe straps that easily secure EMT conduit..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

(Pack of 50) AP-10451, 3/4 Inch Two Hole Snap On Pipe Strap for EMT Conduit Installation, Reinforced Rib for Extra Strength, Galvanized Zinc Plated Metal, Tension Clamp for Easy Snap-On

  • QUALITY AND DURABILITY – These 3/4 inch Snap-On conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT two-hole pipe strap provides extra strength and durability..
  • EASY INSTALLATION – These two-hole design snap on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use screws to secure it onto any surface. They are perfect for both indoor and outdoor applications..
  • ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit different pipes, cables, hoses, and tubes. Choose from a selection of  2 inch, 1-1/2 inch, 1-1/4 inch, 1 inch, 3/4 inch, or 1/2 inch sizes..
  • VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to non-insulated ferrule..
  • ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.
Check Stock