ReviewsConduit For Outdoor Use

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

Leviton 42777-1WA Surface Mount Backbox, Single Gang, White, Box Depth Is 1.89 Inches

  • For use with conduitDescriptionThomas & Betts 583611/2-30 Single Gang Utility BoxThomas & Betts 583611/2-30 Single Gang Utility Box Features:Three 1/2" each side conduit knockoutsOne 1/2" each end conduit knockoutsTwo 1/2" bottom conduit knockoutsFactory provided raised ground screw locationSteel13.0 cubic inch capacity1-7/8" deep with conduit knockouts.
Check Stock

Rectorseal 55996 Quart Gray Pvc Conduit 633L Low Voc Pvc Solvent Cement

  • PVC Electrical Conduit Cement 633L is specially formulated for use on PVC conduit Types I and II.
  • It is a medium body cement in clear or gray to match conduit color.
  • Medium fast setting allows corrections before setting up.
Check Stock

OhLectric OL-43183 Two Hole Rigid Pipe Strap - Sturdy Steel Strap clamps - Zinc Plated Steel - Reinforced Rib - Corrosion Resistant - Easy To Install - 1 Inch (Pack of 25)

  • HIGH-QUALITY MATERIAL: Engineered with premium quality top grade material, Ohlectric’s two hole pipe strap is made to last for a long time and is highly durable. This metal strap is used when extra load bearing is needed to attach the conduit to wood, masonry or alike surfaces..
  • EXTRA STRENGTH FOR PIPES: This metal pipe strap has a snap-in feature with a ribbed design which gives extra strength to this 2-hole rigid pipe strap. The sturdiness of this pipe strap makes it ideal for industrial usage. The Reinforced Hole on this strap gives more strengthening support to the pipings..
  • GREAT RESISTANCE: Iron straps easily get rust when used on the plumbing pipes. To avoid this we have made this strap from zinc-plated steel which is highly resistant to corrosion. Highly corrosion resisting property of this rigid pipe strap makes it an ideal accessory for outdoor applications..
  • EASY TO INSTALL: You can easily fix this two-hole rigid strap over the pipes using the snap-in installation feature. Without the help of complex tools or costly technicians, you can secure your conduit over any surface. This metal strap holds the pipe secur....
Check Stock

Pulse

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock

Sealproof 1-Inch Non-metallic Liquid-Tight Conduit and Connector Kit, 25 Foot Made in USA Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1" Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

1-in Liquid-Tight Connector

  • Superior liquid tight seal and pull out strength.
  • No threading of the conduit or tubing required.
  • Smooth interior surfaces for easier wire installation.
  • Furnished with steel locknut and seal gasket.
Check Stock

Southwire - 59896940 Tools & Equipment FTSP45-125FML SIMPULL Fish Tape 4.5mm 125-Feet Flexible Metal Leader, Large Case

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
  • DOES NOT RUST.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.
Check Stock

Triple Album Collection Vol 2

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Southwire SDCFR Conduit Fitting Reaming Screwdriver Heavy Duty Dual Function Multi Use Detachable Head Compatible with Drill Cushion Grip Handles for Comfort

  • Conduit fitting reaming screwdriver that perfectly reams and smooths 1/2", 3/4", and 1" Thin-wall Conduit ends to protect wire and permit correct....
  • Dual function: Conduit reamer reams inside and outside of conduit simultaneously.
  • Comfortable grip: Comfortable cushioned grip allows a firm grip and greater torque.
  • Multi USE head: reaming head can be removed and used with your power drill.
  • Head compatible with drill: detachable head can also be used in a drill...........
Check Stock

Klein 56206 Conduit Bender with Handle, 1/2'

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock