ReviewsConduit Insulation Bushing

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

CableClear -DIY Kit : Behind Wall TV Wire Kit

  • Hide ugly TV cords quickly and easily inside new or existing stud walls. No special DIY skills are required and a holesaw, plum bob and insulation cone are included for easy installation..
  • Hose length is fully adjustable to suit all TV heights. Hides cables up to 3'4" (1.0m) inside the wall and Extension Kits are available for TVs mounted extra high..
  • 2" diameter hose enables TV cords to gravity-fed through, including power cords with standard wall plugs. No wire pulling rods are required. Additional cables can be added later without any hassle..
  • Super slim profile (5/32") enables TVs to be mounted super-flat for that clean, professionally installed look. No ugly painted conduits on the wall..
  • All components are manufactured to the highest quality standards and exceed the international UL94 standard for conduit safety ratings. SATISFACTION GUARANTEE..
Check Stock

Klein Tools 80035 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Measures Angles, Magnetic Base, 2-Piece

  • MEASURE OR SET ANGLES, check relative angles, or can be used as a digital level.
  • REVERSE CONTRAST DISPLAY improves visibility.
  • MAGNETIC BASE attaches to conduit, pipes, saw blades and other ferromagnetic surfaces.
  • V-GROOVE EDGES enable optimal alignment on conduit and pipes.
  • DIGITAL LEVEL MEASURES 0-90 Degree or 0-180 Degree ranges.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

Southwire SDCFR Conduit Fitting Reaming Screwdriver Heavy Duty Dual Function Multi Use Detachable Head Compatible with Drill Cushion Grip Handles for Comfort

  • Conduit fitting reaming screwdriver that perfectly reams and smooths 1/2", 3/4", and 1" Thin-wall Conduit ends to protect wire and permit correct....
  • Dual function: Conduit reamer reams inside and outside of conduit simultaneously.
  • Comfortable grip: Comfortable cushioned grip allows a firm grip and greater torque.
  • Multi USE head: reaming head can be removed and used with your power drill.
  • Head compatible with drill: detachable head can also be used in a drill...........
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included (1/2\ Dia. x 50 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(2\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(1\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Rectorseal 55996 Quart Gray Pvc Conduit 633L Low Voc Pvc Solvent Cement

  • PVC Electrical Conduit Cement 633L is specially formulated for use on PVC conduit Types I and II.
  • It is a medium body cement in clear or gray to match conduit color.
  • Medium fast setting allows corrections before setting up.
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock