ReviewsConduit Lock Washer Kit

KWODE Commercial Wall Mount Faucet Installation Kit, Wall Mount Kitchen Faucet Mount Kit Backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

  • Commercial Faucet Installation Kit:This faucet installation kit connected size is G1/2 male(also called 1/2 IPS), not 1/2” NPT, fitting wall commerical faucets with G1/2 female end..
  • LEAK-PROOF DESIGN: It is one-piece construction for no leaking, plastic washers and rubber washers are used together for better leak-proof effect..
  • EASY TO INSTAL :Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of stainless steel sink by lock nuts to secure faucet.(tips please use the water tape to avoid leakage).
  • INSTALLATION KIT FOR BACKSLASH MOUNT FAUCET:This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of stainless steel commercial kitchen prep & utility sink, which can save you space and increase the service life of the water supply line..
  • SOLD IN PAIR: Comes with 90 degree angled elbow joint x 2, lock nut x 2, stainless steel washer x 2 and rubber washer x 2..
Check Stock

Nefish Mini Fridge Stand Universal Stand Base Adjustable Refrigerator Stand with 4 Strong Feet Washing Machine Pedestal Multi-Functional Base for Dryer (Black)

  • SAVE SPACE: Stacked washer/dryer combination helps save space in your laundry room. By orienting your laundry units vertically as opposed to horizontally, you free up floor space for other appliances and tools. Free Stacking Kit Included to stack the dryer on top of the washer securely..
  • SAVE TIME: Allows you to wash and dry at the same time and typically have a greater load capacity, so you can put more clothing into one load..
  • EASY TO ACCESS CONTROLS: The total height of stacked machines is approximately 60 inches..
  • DELAY START: Program washer to start up to 24 hours in advance for convenience and to take advantage of lower electricity rate timings..
  • CHILD LOCK: Child lock prevents tampering with the controls of the unit..
Check Stock

Keadic 550Pcs Spring Lock Washer Assortment Kit Black Zinc Plated Alloy Steel, 9 Sizes - M2 M2.5 M3 M4 M5 M6 M8 M10 M12

  • ☘️〖1. What You Will Get〗 -- In this Spring Lock Washer Assortment Kit, you could get total 550pcs assorted metal washers including 9 Metric sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12. Widely meet your various home DIY or automotive demands. In addition, all of these items are packed in a sturdy transparent plastic case with specification label, easy for your storage and very handy for hobby use!.
  • ☘️〖2. Multi-functional Application〗 -- Spring Lock washers are usually used to prevent nuts from loosening, reduce vibration and protect parts, perfect for home DIY, automotive, and shop use. In the case of relatively large load as well as bearing vibration load, it's better to use flat washer and spring lock washer combination..
  • ☘️〖3. High Quality〗 -- Keadic Spring Lock Washers are made of Black Zinc Plated Alloy Steel, with rust resistant galvanized finish to ensure life-time use..
  • ☘️〖4. Well Made & Great Value〗 -- Our Washers are well made, with smooth and shiny suface, which looks very attractive. Most importantly, they are cheaper than most of replacements in the hardware market, you are worth to get these nice bargains!.
  • ☘️〖5. 100% Satisfaction Assurance〗 -- If there are any issue you come across with our products, feel f....
Check Stock

Keadic 760Pcs Spring Lock Washer Assortment Kit Black Zinc Plated Alloy Steel 9 Sizes - M2 M2.5 M3 M4 M5 M6 M8 M10 M12

  • ☘️〖1. What You Will Get〗 -- In this Spring Lock Washer Assortment Kit, you could get total 760pcs assorted metal washers including 9 Metric sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12. Widely meet your various home DIY or automotive demands. In addition, all of these items are packed in a sturdy transparent plastic case with specification label, easy for your storage and very handy for hobby use!.
  • ☘️〖2. Multi-functional Application〗 -- Spring Lock washers are usually used to prevent nuts from loosening, reduce vibration and protect parts, perfect for home DIY, automotive, and shop use. In the case of relatively large load as well as bearing vibration load, it's better to use flat washer and spring lock washer combination..
  • ☘️〖3. High Quality〗 -- Keadic Spring Lock Washers are made of Black Zinc Plated Alloy Steel, with rust resistant galvanized finish to ensure life-time use..
  • ☘️〖4. Well Made & Great Value〗 -- Our Washers are well made, with smooth and shiny suface, which looks very attractive. Most importantly, they are cheaper than most of replacements in the hardware market, you are worth to get these nice bargains!.
  • ☘️〖5. 100% Satisfaction Assurance〗 -- If there are any issue you come across with our products, fe....
Check Stock

PLUMIA 8 Inch Steel Wire Rotary Brush Cutter Trimmer Head Weed Blade Cutter with Universal Adapter Kit Compatible with Husqvarna, Stihl, String Trimmers, Gardening Lawnmower, Moss Grass Rust Removal

  • ...ead, This blade fits most gas and electric straight shaft trimmers with a 10-inch by 1-inch arbor. Compatible brands include Husqvarna, Stihl, Oregon, and Hitachi.Replacement for String Trimmers, Gardening Lawnmower, Moss Grass Rust Removal..
  • Two Pack Different Adapter Kits: Blade adapter attachment maintenance washer First kit contains 1 x Thrust Washer/ 1 x Rider Plate/ 2 x different size Collar Nut/ 1 x Screwdriver/ 2pc x L-Wrench/ 1pc x T-Wrench/ 2pc x washer. The Second Kit: 1 x Thrust plate guard washer / 1 x Thrust washer/ 1 x Rider plate/ 1 x Lock nut/2 x washer /1 x Gloves..
  • The weed brush with twist knot wire and internal holding plate to ensure stability and safety. Aside from trimming the lawn, this twisted rotary wheel is perfect for trimming tight and paved corners, clearing moss and growths on walkways, remove stubborn weeds on sand or gravel, removing rust and cement slag, deburring, and polishing applications..
  • Just need to connect weed brush to the shaft punch of the mower, it can be quickly and easily assembled and disassembled. This trimmer brush head has a 1-inch hole in the center, which is suitable for most trimmers (including most stroke, four-stroke, backpack-type mowers)..
  • The rotary wired trimmer blades is made of high qua....
Check Stock

Tool Daily Short Pressure Washer Gun, High Replacement, M22 Thread, with 5 Nozzle Tips, 4000 PSI

  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer gun kit includes: 1-piece Pressure Washer Gun, 1-piece brass coupler, 1-piece Red Nozzle (0 Degree), 1-piece Yellow Nozzle (15 Degree), 1-piece Green Nozzle (25 Degree), 1-piece White Nozzle (40 Degree), 1-piece Brass soap nozzle tip (65 Degree)..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★ATTENTION: NOT FIT GardenHose or WaterHose. High replacement pressure washer guns works with electric or gas pressure washer..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer wand has M22 THREAD and 14 MM INNER CONNECTOR FITTING. If hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★1/4’’ standard quick connector. Connects any accessories with 1/4’’ plug to the gun. Such as nozzles tips, pivoting coupler, foam cannon, extension wand, surface cleaner, undercarriage cleaner, water broom. Safety trigger lock to prevent unintended operation..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ....
Check Stock

Jet Clean Window Cleaning & Washing Kit - Squeegee & Microfiber Window Washer- Pro Window Cleaning Kit-13.5" Cleaner for Glass, Mirror, Shower, Auto

  • 2 TOOLS – PROFESSIONAL WINDOW WASHER AND SQUEEGEE WITH SCRAPER – The Jet Clean Pro Window Cleaning Kit has a 13.5 inch-wide premium grade microfiber window washer with Power Scrub Strip, and a 13.5 inch-wide squeegee with scraper..
  • WINDOW WASHER – The Pro Window Cleaning Kit has a 13.5 inch-wide window washing tool with premium grade microfiber and a Power Scrub Strip that cleans glass and windows quickly and easily. The large, flat cleaning surface combined with the premium microfiber and Power Scrub Strip removes dirt faster than other window cleaners with curved or rounded cleaning surfaces..
  • SQUEEGEE WITH SCRAPER – The Pro Window Cleaning Kit also has a 13.5 inch-wide squeegee with metal scraper. Use the rubber squeegee blade to remove water, prevent water spots, or use it as an applicator for grout and adhesives. The curved metal scraper holding the rubber blade can be used to scrape off tough dirt and grime..
  • THE 2 TOOLS NEST TOGETHER – 4 WAYS TO CLEAN – The squeegee handle will insert and lock into the washer handle, so that both tools can be nested together. Nest them together facing the same way for quick cleaning, nest them together facing opposite directions for more control and room to clean, or separate the two tools to u....
Check Stock

Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

  • Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall).
  • Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction..
  • Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts.
Check Stock

RIDGE WASHER Pressure Washer Gun with Extension Wand for Hot and Cold Water, Power Washer Gun with M22 Fitting, 5 Nozzle Tips, 40 Inch, 4000 PSI

  • Power washer gun is designed for hot and cold water in gas and electric pressure washer. Max Temperature for water is up to 100℃ ( 212°F ). Max Flow Rate is up to 5.3 GPM. Max Pressure is up to 4000 PSI..
  • This pressure washer wand fits pressure washer hose with M22 14mm or M22 15mm fitting. Generac, Ryobi, Briggs Stratton, Craftsman, Simpson, Karcher pressure washer hose has M22 14mm fitting. Sun Joe, Excell, MI-T-M, Stanley, Campbell, AR Blue, Cleanforce, Simoniz power washer hose has M22 15mm fitting. Please connect power washer wand to the hose directly if your hose has M22 14mm fitting. Please connect brass coupler between wand and hose if your hose has M22 15mm fitting..
  • The length of pressure washer handle is adjustable. Easy to change the length based on the purpose of cleaning. There are three length, 40 inch, 24 inch, 9 inch..
  • 5 spray nozzles have different spray angle (0, 15, 25, 40, 65 degree). Choose suitable nozzle based on the purpose of cleaning. Such as watering flowers or plants, washing car, fence or roof. Universal 1/4’’ quick connector is also designed for turbo nozzle, surface cleaner, water broom, undercarriage cleaner, pivoting coupler, foam cannon, pressure washer sandblasting kit, gutter cleaner attachment..
Check Stock

781-0490 742-0571 and 710-1054 Fits for MTD/Troy-Bilt Craftsman Chipper Shredder Blade Kit

  • Part Numbers:981-0490 781-0490 942-0571 742-0571 Compatible Craftsman/Troy-Bilt/MTD/Yard Machines Impeller Shredder/Chipper Blade Kit with Fasteners.
  • Kit Includes: 2 Chipper Blades (781-0490) and 1 Shredder Blade (742-0571).
  • Fasteners: 710-1054 Screws 5/16"X24"X1" Includes 6. 736-0119 Lock Washer 5/16" Includes 6. 912-0411 Lock Nut 5/16" Includes 6..
  • Shredder Blade Dimensions: Length: 8-3/8". Width: 2". Thickness: 3/16". Bolt Spacing on center: 4-7/8""..
  • You need no special tools to install this high-quality center shredder blade in your gas-powered vacuum chipper shredder. It is recommended that you....
Check Stock

Installation kit for Wall Mount Commercial Faucet,backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

  • 【INSTALLATION KIT FOR BACKSLASH MOUNT】This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink.
  • 【1/2 IPS STRAIGHT THERAD】it is NOT 1/2 NPT,it's 1/2 IPS which is also called G1/2,fitting wall commerical faucets with G1/2 female end.
  • 【LEAK FREE】its one-piece construction for no leaking.
  • 【EASY TO INSTAL】Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of Stainless Steel sink by lock nuts to secure faucet.
  • 【SOLD IN PAIR】comes with 90 degree angled elbow joint x 2,lock nut x 2,plastic washer x 2 and rubber washer x 2.
Check Stock