ReviewsConduit Strap Kit

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

... KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 2 position switches to turn each light Off or On Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most application....

Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

...- This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most applications....

Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

...This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most application....

Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

...This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most appl....

Check Stock

Antrader M25/1Inch 304 Stainless Steel 2-Hole Pipe Strap Tension Tube Clamp Pack of 16

304 stainless steel 2-Hole Pipe Strap accommodates 1 Inch pipe and has 2 holes to secure it in place..
Used to secure rigid conduit to wood, masonry or similar surfaces..
These durable galvanized straps will secure piping to studs or joists to reduce vibration noise..
Easy to mount by screws, but mounting screws are not included..

Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,3/4inch 25ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,3/4 in Dia

【PREMIUM Liquid-Tight Conduit】- Length :25'，ID：3/4inch，OD：1inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit....
【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....

Check Stock

Venhill U01-1-102-BK Universal Motorcycle Clutch Cable Kit 92 Inch

High-quality, "build-your-own" cable kit suitable for generally any motorcycle clutch application.
This is a practical, durable kit for building your own clutch cable for a custom chopper, a unique classic, a show project, or a vintage race bike..
The conduit is spiral wound steel covered with tough black PVC.
The inner liner is Teflon for smooth action and zero maintenance..
The wire is galvanized steel for long life and easy soldering..

Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..

Check Stock

Clamp Type Connector 1/2 Inches and 3/4 Inches Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver

A variety of quantities: there are 4 pieces 4 1/2-inch and 4 pieces 3/4-inch cable connectors in the package, enough to meet your replacement and use needs in daily work, and better cooperate with you to complete the work.
Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
Screw strap design: 650XY2 clip-on connector has 2 screw straps and flexible conduit FTGS.
It is a service entrance cable accessory, but not a metal cable.
The cable size is 14 awg, and the shooting distance is about 1/2 inch and 3/4 inch.
Size information: the cable connector clamp is about 1/2 inch and 3/4 inch, please pay attention to whether it meets your daily work and cooperation needs before buying to prevent wrong purchase.

Check Stock

Modway Conduit 7 Piece Rattan Patio Dining Set in Brown and Mocha

Refresh your alfresco space with the Conduit 7 Piece Outdoor Patio Dining Set. Bringing transitional style with contemporary modern flair to any outdoor area, Conduit Armchairs feature a powder-coated aluminum frame wrapped in synthetic UV-resistant wicker rattan. Foam padded cushion and waterproof cover offer a comfortable seat while dining or entertaining. The Conduit 70" Dining Table features a tempered glass tabletop provides a smooth, easy-to-clean surface ideal for dining and entertaining.
Set Includes: One - Conduit 70" Outdoor Dining Table, Six - Conduit Outdoor Dining Armchair.
Overall Product Dimensions: 120"L x 88.5"W x 34.5"HTable Dimensions: 70"L x 38.5"W x 30"HChair Dimensions: 25"L x 24.5"W x 34.5"H.
Material: Square aluminium tube:40*40*1.5mm.

Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
for original equipment manufacturers or field installers. 0 Ring and steel locknut included.

Check Stock