ReviewsConduit Strut Cap

Upgrade Fish Tape Wire Puller Through Wall Wire Threader Fish plus Fish Cable Fastener with Steel rope 40FT(12M)

  • ⭐【Perfect Flexibility and Rigidity】Unlike fiberglass wire, it will not break if you bend too much, unlike other steel fish tape, it will not curl a lot. Our Plastic-Coated Steel Fish Tape has strong traction, good flexibility, Anti-aging and high temperature..
  • ⭐【Plastic-Coated Steel】With non-conductive plastic-coated construction, the versatile fish cable is applicable for telecom, electrical, wall, floor conduit and other wiring installation. It is the perfect tool to assist you in pulling cables through occupied duct and panel boxes..
  • ⭐【Fish Tape Fastener】Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly..
  • ⭐【360°Available Head Wheel】The Head wheel at the end of steel wire is 360° available, much easy to across through the bends. And the unique connection method makes it durable and convenient life..
  • ⭐【Attention】The Fish Cable works great in smaller conduit, but not thicker cables or large pipe..
Check Stock

Westinghouse Lighting 0107000 Saf-T-Grid for Suspended Ceilings

  • Saf-T-Box allows safe, simple installation of fans and fixtures, ideal for new construction and where attic is accessible.
  • Supports ceiling fans up to 70 pounds or lighting fixtures up to 150 pounds.
  • Includes three knockouts for Conduit or Romex, one Romex clamp.
  • 21.5-cubic-inch wiring capacity, electrical box is 2-1/8 inches deep.
  • Includes Saf-T-Cap, mounting hardware and instructions.
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,3/4inch 25ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,3/4 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length :25',ID:3/4inch,OD:1inch,Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit....
  • 【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Westinghouse Lighting 0124000 Sidemount Plus Fan Box 2-1/8 Inch Deep

  • Sidemount Plus Fan Box allows safe, simple installation of fans and fixtures, ideal for remodel applications.
  • Supports ceiling fans and lighting fixtures up to 70 pounds.
  • Includes three 1/2-inch Romex or conduit knockouts, two sets of Romex knockouts, one Romex clamp.
  • 21.5-cubic-inch wiring capacity, electrical box is 2-1/8 inches deep.
  • Includes sidemount bracket, electrical box, Saf-T-Cap, mounting hardware and instructions.
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50',ID:1inch,OD:1.22inch, The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Monroe Shocks & Struts Strut-Mate 63631 Strut Bumper and Bellows Kit

  • REPLACeS DAMAGED JOUNCE BUMPER OR BOOT -- Avoid premature strut failure by replacing missing or damaged strut components.
  • PROTECTS PISTON ROD -- Protects piston rod finish from rust and corrosion and helps reduce oil leakage.
  • KEEPS MOISTURE AND DIRT OUT -- Self-draining design eliminates retention of moisture and other unwanted debris.
  • ENHANCES STRUT LIFE -- Delivers protection from severe suspension movement to improve strut durability.
  • PERFECT PAIRING -- Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete....
Check Stock

Monroe Shocks & Struts Strut-Mate 63628 Strut Bumper and Bellows Kit

  • REPLACeS DAMAGED JOUNCE BUMPER OR BOOT -- Avoid premature strut failure by replacing missing or damaged strut components.
  • PROTECTS PISTON ROD -- Protects piston rod finish from rust and corrosion and helps reduce oil leakage.
  • KEEPS MOISTURE AND DIRT OUT -- Self-draining design eliminates retention of moisture and other unwanted debris.
  • ENHANCES STRUT LIFE -- Delivers protection from severe suspension movement to improve strut durability.
  • PERFECT PAIRING -- Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete....
Check Stock

Detroit Axle - Front Quick Struts & Coil Spring Assembly + Sway Bar Link + Inner & Outer Tie Rod End w/Boots Replacement for 2003 2004 2005 2006 Toyota Tundra - 10pc Set

  • Compatible With 2003 Toyota Tundra 2004 Tundra Shocks 2005 Tundra Struts 2006 Toyota Tundra Struts. Front Struts Complete Assembly Pair Sway Bar End Links Front Sway Bar Link Inner Tie Rod Outer Tire Rod End Boots.
  • This Kit Is Direct Replacement For All Models For 2003-2006 Toyota Tundra. Amortiguadores Delanteros Front Struts And Shocks Complete Assembly Strut Assembly Inner Tie Rod End Outer Tierod.
  • This Kit Inludes Front Strut Kit & Coil Spring Assembly, Front Sway Bar Link Kit. Strut Mount Kit Strut Spring Assembly Front Spring Front Coil Spring Stabilizer Sway Bar Barra Estabilizadora Delantera Tie Rod End Boots.
  • Compatible With 2004 Toyota Tundra Front Struts 2005 Toyota Tundra Front Struts 2006 Tundra Front Struts. Front Strut Assembly Coil Struts Stabilizer Bar Link Tire Rod Front Tie Rod End.
  • 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Brake Kit, Front Suspension Kits. The Parts In This Kit Are Compatible With Toyota Tundra Front Strut Assembly Full Set Sway Bar Link Strut. Strut Coil Spring Assembly Sway Bar End Link Front Strut And Spring Assembly Stablizer Link Sway Bar Stabilizer Link Tie Rod Assembly.
Check Stock

OhLectric OL-39827 Strut Channel Nut with Short Spring - 3/8-16” UNC Threads - 0.37” Thickness - Spring Nut With Zinc Electroplate Finish - Great For Use with 13/16” & 1” Channels (Pack of 5)

  • SUPERIOR QUALITY: Fits all channels! Constructed using premium quality zinc material, these spring nuts are extremely durable with high strength and are built to last for a lifetime..
  • CORROSION FREE: Offers superior corrosion and oxidation resistance! Our strut spring nuts are coated with zinc plated steel alloy which totally eliminates the chances of rust and corrosion formation on all types of channels and inserts.
  • PERFECT FIT: An ideal electrical accessory! Each of our channel spring nuts has a .37inch thickness and is surrounded with 3/8-16inch UNO threads which are perfectly suitable for all 13/16” & 1” channels and inserts!.
  • SAFETY TESTED: All our products are certified by Culus for high reliability. Also, our zinc spring nuts meet the specification standards set by them as we value customer satisfaction and safety more than anything else..
  • VERSATILE: Must-have stuff in every tool bag! This channel nut with spring is designed to develop a wedging action that provides resistance to pull out and side slip which makes it an excellent choice for all metal conduit channels!.
Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

  • SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
  • DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
  • IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Modway Conduit 7 Piece Rattan Patio Dining Set in Brown and Mocha

  • Refresh your alfresco space with the Conduit 7 Piece Outdoor Patio Dining Set. Bringing transitional style with contemporary modern flair to any outdoor area, Conduit Armchairs feature a powder-coated aluminum frame wrapped in synthetic UV-resistant wicker rattan. Foam padded cushion and waterproof cover offer a comfortable seat while dining or entertaining. The Conduit 70" Dining Table features a tempered glass tabletop provides a smooth, easy-to-clean surface ideal for dining and entertaining.
  • Set Includes: One - Conduit 70" Outdoor Dining Table, Six - Conduit Outdoor Dining Armchair.
  • Overall Product Dimensions: 120"L x 88.5"W x 34.5"HTable Dimensions: 70"L x 38.5"W x 30"HChair Dimensions: 25"L x 24.5"W x 34.5"H.
  • Material: Square aluminium tube:40*40*1.5mm.
Check Stock