ReviewsConduit Surface Raceway

Cable Matters 200-Pack Nail-in Cable Clips Cord Organizer

  • Nail-in cable organizer provides snug and secure placement of an LMR 240, RG8X, RG58 or RG59 coax cable, RG6 digital video coaxial cable, digital audio coaxial cable, Ethernet Cat 5 or Cat 6 network cable, 12 to 16 AWG speaker wire, phone wire, USB cable, or slim video cable.
  • The cord holder supports most cables with a 7mm outside diameter or smaller.
  • Handy cord management alternative to wire mold, raceway, cable holder, or conduit.
  • Ideal solution for routing cables such as a short run TV coaxial cable in a home theater setup or a long run antenna cable in an office warehouse.
  • Organize and route cables along baseboards or wood trim molding with these cord clips.
  • Run cables in tight spaces around door frames through the wire clips with the confidence that they will remain in place.
  • Secure cable management clips prevent tripping hazards for kids or pets.
  • The cord keeper secures most round electrical cords of small appliances and electronics to prevent accidental disconnection and provide a clean looking installation.
  • Convenient 200 pack wire holder clips come in a plastic container to store spare cable clips in your tool box or garage.
  • One piece cable clip with an integrated nail with no extra parts to lose.
Check Stock

D-Line 18\ One-Piece TV Cord Cover White, Half Round Cable Raceway, Desk Cable Management Solution, Decorative Cable Concealer - 2\ (W) x 1\ (H) x 18\ Length

  • ...-install, no prior DIY or electrical know-how is required to install. D-Line Raceway is produced from high grade pvc, cable hider lengths can be easily cut to size (if required). Each D-Line cord cover length is supplied with strong self-adhesive backing, simply peel and stick D-Line cable raceway to a smooth clean surface, open hinged hid & snap shut utilizing patented click-lock lid..
  • D-Line TV Wire Hiders are available in a range of colors, however for the perfect finish D-Line Cable Raceway is fully paintable. To paint.
  • simply key the cable cover with a fine sandpaper & apply two coats of paint!.
  • To cover cords around a variety of popular angles, compatible D-Line wire cover accessory multipacks are also available. Design of D-Line Clip-Over bends & tees forgives any imprecise cuts or measurements, while Smooth-Fit connectors & end caps internal shoulders fit securely under lengths, leaving a smooth-flush finish. One-piece design of D-Line half round cable raceway, avoids need to cut lid & base separately..
  • Each pack includes: 1x D-Line 2" (W) x 1" (H) x 18" Half Round White Cord Hider Length. 18" length sufficient for common TV wall mount installations, however longer 39" Lengths are also available..
Check Stock

Triple Album Collection Vol 2

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Corner Duct Cable Raceway - On-Wall Raceway Kit - Wall Corner Black/White/Beige - 5 feet in Length

  • Manufactured of a strong, durable, lightweight, UL 94-VO & UL 62DB compliant and flame retardant PVC Plastic | UL 5A specification for 600 volt applications. | One inch minimum bend radius accessories available for Category 5e,12 and fiber optic installatns..
  • Triangular corner raceway blends into wall/ceiling junctions to provide clean, finished appearance. FOR BEST RESULTS - Prior to Installation.
  • Clean wall surface, after installation allow 48 - 78 hrs for adhesive to cure before adding cables. Depending onocation (ceiling), surface type, and weight, additional adhesive or screws can be used for permanent installation.n.
  • Can easily be painted with any Latex based paint to help match any previously painted walls or ceilings.
  • Easy no-drill corner cable management solution. Great for condo/apartment dwellers or leased/temporary office space.
Check Stock

Klein 56206 Conduit Bender with Handle, 1/2'

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Modway Conduit 7 Piece Patio Dining Set with Light Finish EEI-4015-LGR-MOC-SET

  • Refresh your alfresco space with the Conduit 7 Piece Outdoor Patio Dining Set. Bringing transitional style with contemporary modern flair to any outdoor area, Conduit Armchairs feature a powder-coated aluminum frame wrapped in synthetic UV-resistant wicker rattan. Foam padded cushion and waterproof cover offer a comfortable seat while dining or entertaining. The Conduit 70" Dining Table features a tempered glass tabletop provides a smooth, easy-to-clean surface ideal for dining and entertaining.
  • Set Includes: One - Conduit 70" Outdoor Dining Table, Six - Convene Dining Armchair Cushions.
  • Overall Product Dimensions: 120"L x 88.5"W x 34.5"HTable Dimensions: 38.5"L x 70"W x 30"HIndividual Armchair Dimensions: 25"L x 24.5"W x 34.5"HSeat Dimensions: 19.5"L x 19"W x 17"HArmrest Dimensions: 25.5"HBackrest Dimensions: 18"H.
  • Material: Square aluminium tube:40*40*1.5mm.
Check Stock

Hot Wheels Roll Out Raceway Track Set

  • ​The Hot Wheels Roll Out Raceway combines racing and storage in one cool and convenient package.
  • ​When collapsed, the Hot Wheels Roll Out Raceway serves as a bucket that can hold up to 80 die-cast vehicles and 5 track pieces It includes a....
  • ​When unrolled, the Hot Wheels Roll Out Raceway is a 5-lane raceway, with a fair start mechanism and a finish line that shows the winner -- up to 5....
  • ​The tracks can connect to other sets (sold separately) for extended racing and enhanced challenges.
  • ​With a car included for action right out of the box, the Hot Wheels Roll Out Raceway set is an awesome gift for kids 4 years and older.
Check Stock

Clamp Type Connector 1/2 Inches and 3/4 Inches Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver

  • A variety of quantities: there are 4 pieces 4 1/2-inch and 4 pieces 3/4-inch cable connectors in the package, enough to meet your replacement and use needs in daily work, and better cooperate with you to complete the work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw strap design: 650XY2 clip-on connector has 2 screw straps and flexible conduit FTGS.
  • It is a service entrance cable accessory, but not a metal cable.
  • The cable size is 14 awg, and the shooting distance is about 1/2 inch and 3/4 inch.
  • Size information: the cable connector clamp is about 1/2 inch and 3/4 inch, please pay attention to whether it meets your daily work and cooperation needs before buying to prevent wrong purchase.
Check Stock

D-Line 39\ White Quarter Round Cable Raceway, Corner Cord Cover, Self-Adhesive Floor Molding with Wire Channel, Baseboard Cable Hider - 0.87\ (W) x 0.87\ (H) x 39-inch Length - White

  • D-Line 0.87” x 0.87” Quarter Round Cable Raceway covers expansion gaps between wood floors and baseboards, while providing an easy-to-use cord cover around floor perimeters. These features make D-Line Quarter Round Raceway a popular alternative to traditional floor edging, with the added benefit of a cable channel! Popular for hiding cables around benches and worktops too..
  • The 0.87” x 0.87” (W x H) Quarter Round Raceway dimensions scale well to blend with popular baseboards, while providing capacity for cables bending around corners, ideal to cover cords on benches and worktops also..
  • D-Line Quadrant Cable Raceway lengths are supplied with strong self-adhesive backing for peel & stick installation..
  • D-Line corner raceway has a one-piece design & patented click-lock lid for quick and easy installation… while also providing flexibility to add or remove cables. D-Line 0.87” x 0.87” Raceway features combine to enable approximately 50% quicker installation versus traditional baseboard trims! To cover cords around 90-degree bends Raceway Accessories are available, allowing the user to hide cords around a variety of popular angles..
  • Each pack contains: 1x D-Line Quarter Round Cable Raceway - 0.87” (W) x 0.87” (H) x 39” Length – White (pai....
Check Stock

STRUT 3/4\ CONDUIT CLAMP by UNISTRUT MfrPartNo RP1212EG

  • QUALITY AND DURABILITY – These 3/4-inch snap-on conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT one-hole pipe strap provides extra strength and durability..
  • EASY INSTALLATION – These one-hole design snap-on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use a screw to secure it onto any surface. They are perfect for both indoor and outdoor applications..
  • ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit many different pipes, cables, hoses, and tubes. Choose from a selection of 1/2 Inch, 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch, and 2 Inch sizes..
  • VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to pipes, tubes, cables, and hoses..
  • WHY CHOOSE AIRMONT PRODUCTS? ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.
Check Stock

Klein Tools 51606 Aluminum Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Food Pedal, Benchmark Symbols and Angle Setter

  • 1/2-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degree, 22.5-Degree, 30-Degree, 45-Degree, 60-Degree and corresponding offset multipliers.
Check Stock