ReviewsConduit Union Connector

Leviton 42777-1WA Surface Mount Backbox, Single Gang, White, Box Depth Is 1.89 Inches

  • For use with conduitDescriptionThomas & Betts 583611/2-30 Single Gang Utility BoxThomas & Betts 583611/2-30 Single Gang Utility Box Features:Three 1/2" each side conduit knockoutsOne 1/2" each end conduit knockoutsTwo 1/2" bottom conduit knockoutsFactory provided raised ground screw locationSteel13.0 cubic inch capacity1-7/8" deep with conduit knockouts.
Check Stock

HydroMaxx Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit (1\ Dia x 25 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Woods Southwire 55094222 Liqua Flex 1/2-Inch by 50-Feet Non-Metallic Liquidtight Flexible Conduit

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Westinghouse Lighting 0110000 Saf-T-Brace for Ceiling Fans 3 Teeth Twist and Lock,Silver Pack of 1

  • Saf-T-Brace allows safe, secure installation of fans and light fixtures, ideal for new construction or remodel.
  • Supports light fixtures up to 150 pounds on 16-inch centers, fixtures up to 50 pounds on 24-inch centers and fans up to 70 pounds.
  • Dual-mount electrical box has 15.5 cubic inches wiring capacity.
  • 1-1/2 inches deep, 6 knockouts for conduit or Romex.
  • Includes brace, electrical box, Saf-T-Cap, one Romex connector, mounting hardware and instructions.
Check Stock

UbiGear Professional Pass-Through Network Tool Kits Cable Tester +Crimp Crimper +50 RJ45 CAT5e Pass-through Connector Plug Network Tool Kits (PassThrough)

  • 1 x UbiGear Professional Heavy Duty Crimper Crimp Tool for Pass-Through Connector.
  • 1 x UbiGear 916D Cable Tester for cables with RJ45/RJ11/RJ12 Connector (battery/charger not included). The LED lights will flash in rotation if all the wires are properly connected, otherwise the corresponding light will not flash. The color of the LED light Does not mean anything..
  • 50 x RJ45 CAT5e Pass-through connectors. The maximum supported wire OD is 1.02 mm (0.04 in), up to 24 AWG wire (depends on the PVC thickness around the wire). For 23 AWG or thicker wires, the PVC conduit needs to be stripped, or use CAT6 pass-through connectors..
  • UbiGear One-Year Limited Warranty with 100% Satisfaction Guarantee! If there is anything wrong with your order, just let us know, and we’ll take care of it..
Check Stock

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Klein Tools 80035 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Measures Angles, Magnetic Base, 2-Piece

  • MEASURE OR SET ANGLES, check relative angles, or can be used as a digital level.
  • REVERSE CONTRAST DISPLAY improves visibility.
  • MAGNETIC BASE attaches to conduit, pipes, saw blades and other ferromagnetic surfaces.
  • V-GROOVE EDGES enable optimal alignment on conduit and pipes.
  • DIGITAL LEVEL MEASURES 0-90 Degree or 0-180 Degree ranges.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

Southwire SDCFR Conduit Fitting Reaming Screwdriver Heavy Duty Dual Function Multi Use Detachable Head Compatible with Drill Cushion Grip Handles for Comfort

  • Conduit fitting reaming screwdriver that perfectly reams and smooths 1/2", 3/4", and 1" Thin-wall Conduit ends to protect wire and permit correct....
  • Dual function: Conduit reamer reams inside and outside of conduit simultaneously.
  • Comfortable grip: Comfortable cushioned grip allows a firm grip and greater torque.
  • Multi USE head: reaming head can be removed and used with your power drill.
  • Head compatible with drill: detachable head can also be used in a drill...........
Check Stock

Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included (1/2\ Dia. x 50 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(2\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock