ReviewsConnected Motor

100 Carbon Brushes, 20PCs 5×8×16 mm Electric Motor Drill Carbon Brush Replacement with Great Conductivity, Carbon Brush Set

  • These carbon motor brushes are suitable for an electric motor or generator to function, the coils of the rotor must be connected to complete an electrical circuit.
  • These carbon motor brushes are conductive and of good thermal conductivity, durable in using, stable performance will not dispoint you.
  • These carbon motor brushes are perfect replacement for the broken one, 20 pcs per set, convenient to replace the carbon brush.
  • These carbon motor brushes are made of high quality of carbon and alloy, with superior performance, durable in using.
  • Please feel free to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us.
Check Stock

defoo 61973 61971 Carbon Motor Brushes Suitable for Harbor Freight-Chicago Electric HarborFreight HF 10 in. Miter Chop Saw

  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor..
  • Replacing brushes can fix an intermittent motor. New brushes can restore a motors electric braking..
  • The coils of the motor must be connected to complete an electrical circuit for right use. Carbon brush is a item easy to broken when it working..
  • MONEY-BACK GUARANTEE: For any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked..
Check Stock

LGDehome 10PCS DC 5V-36V 15A(Max 30A) 400W Dual High-Power MOS Transistor Driving Controller Module FET Trigger Switch Drive Board 0-20KHz PWM Electronic Switch Control Board DC Motor Speed Controller

  • continuous current 15A at normal temperature.
  • The maximum current can reach 30A under auxiliary cooling conditions..
  • Trigger signal source: digital high and low level (DC3.3V--20V), can be connected to single-chip IO port, PLC interface, DC power supply, etc., can be connected to PWM signal, signal frequency 0--20KHZ support.
  • Adopt imported dual MOS parallel active output, lower internal resistance, large current, strong power, 15A, 400W at room temperature, meeting the needs of most equipment.
  • Application: The output can control high-power equipment, motor, bulb, LED strip, DC motor, micro pump, solenoid valve, etc. It can input PWM, control motor speed, lamp brightness, etc.
  • size: 1.34x0.7x0.5inch/3.4 x 1.7 x1.2cm(L*W*H).
Check Stock

ZEAK 3500 lb. Advanced 12V DC Electric Winch, Off Road Waterproof, Synthetic Rope, Mount, for Sports car, ATV

  • ...load line speed which drives a powerful pulling.
  • Waterproof IP65 powder coated surface for corrosion resistance, could be used even on extremly weather normally, with the durable 3/16 inch x 50 feet synthetic winch rope of high tensile strength that is enough to meet the needs of any outdoor towing jobs.
  • Each lead is connected to the other end of the corresponding lead, so that it is not easy to be confused, it's very convenient and quickly of connecting.
  • 12.9 inches shorter red lead and 13.3 inches shorter black lead connected to the motor.
  • 56 inches longer red lead and 68.7 inches longer black lead connected to the battery ( All leads: 9 Gauge ).
  • The winch will include a 7.2 x 5.1 inches (L x W) universal mounting plate to for mounting on the rear of the machine, the plate will require modifications to work for each specific machine, and a 26-32 feet range wireless remote.
  • From plowing snow to stacking wood, towing equipment, there's an endless list of accessories to your vehicles.
  • You can add the winch for wildcat, prowler, maverick, commander, defender, ranegade, outlander, rzr, ranger, general, sportsman, pioneer, talon, sxs, teryx, mule.
Check Stock

Dayton 1TDT2 Blower, 549 CFM, 115V, 2.05 Amp, 1640 RPM

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, equipped with safety switch.
Check Stock

HuXi FJ Series Electric Digital Lab Mixer Blender Variable Speed Electric Homogenizer Machine (FJ200-SH)

  • The drive motor adopts a series of miniature motor with large output power and compact structure, which is safe and reliable in design.
  • The working parts of the working head are made of high quality stainless steel and have good corrosion resistance.
  • The working head is connected to the drive motor by a coupling, which is easy and flexible to assemble and disassemble.
  • The speed control base adopts the stepless speed governor, which is convenient in speed control and stable in operation.
Check Stock

Faddare 320A Brushed Motor, ESC 320A Brushed Motor Replacement Speed Controller, 6-12V Brushed ESC Electric Speed Controller for RC Car Boat Model (As Shown)

  • When connected with motor, it is capable of supplying up to 320A(forward) 160A(backward) or 270A(brake)of continuous motor current..
  • Note: Install according to the instructions. Brushed Motor is small and powerful, which can be used for different type of ship or car.with High voltage, cut electricity protection function..
  • Its integrated Battery Eliminator Circuit powers the receiver from the motor battery.With automatic cutoff of the motor power to preserve receiver power as the battery becomes depleted..
  • Size: About 43x29x27mm,It is small and powerful, which can be used for different type of ship or car. Package Included: 1pc x Brushed Motor Speed Controller, Size: About 43x29x27mm.
  • High frequency drive system.Use low internal resistance field effect tube.This is a good electronic speed controller for your RC model..
Check Stock

HDMNDD Neato Botvac Laser Lidar Drive Belt O Ring Replacement Buna N Belts Plus Spare Side Brush Compatible Botvac D75 D80 D85 Classic Series 65 70e 75 80 85

  • Compatible ONLY with the following models Botvac D75 D80 D85.
  • Includes 2 heavy duty laser lidar motor compatible O-ring belts and a spare silicone side brush belt for older Neato Botvacs.
  • Don’t wait 6-8 weeks for the manufacturer to fix it, easily replace the laser lidar belt in less than 15 minutes with this kit.
  • This does NOT fit newer models including D3 D4 D5 D6 D7 Botvac Connected, wifi app enabled models, please see my other listing for compatible belts.
  • This is a stronger, more durable and longer life replacement O-ring laser lidar motor belt for a Neato Botvac Connected.
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

SKIL 10 Amp Fixed Base Corded Router —RT1323-00

  • 10 AMP FIXED BASE ROUTER TOOL—Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish..
  • SPEED CONTROL—Lets you adjust speed based on the material..
  • SOFT START—Provides a safe and controlled start to routing..
  • LIVE TOOL INDICATOR—Stay safe and alert with an indicator that lights up when the router is connected to power..
  • DURABLE & ERGONOMIC—Die-cast motor housing and shaped handles provide superior grip and control..
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock