ReviewsConnecting Line

Micro SATA Cables SCSI HPDB 68 Female to IDC 50 Female F/F Adapter Converter 68 Pin to 50 Pin

  • SCSI 2 devices typically use the HPDB50 connector while the wider HPDB68 connector is used for SCSI 3 connections.
  • You can connect your SCSI 2 and SCSI 3 devices together using this adapter from Monoprice! This adapter features a female HPDB68 connector for connecting to SCSI 3 devices and a male HPDB50 connector for connecting to SCSI 2 devices.
  • The male end includes side clip release latches and side clips for securing the adapter to a panel connector while the female end includes nuts for securing to a line connector.
Check Stock

Cmple - Telephone Extension Cord Cable, 6 Conductor Wire with RJ12 6P6C Plug Cable for Landline Telephone - 7 Feet, Gray

  • ✅ 6 PIN PHONE EXTENSION Line Cord Cable Wire – Connect two telephone devices together, telephone device to a wall jack. Ideal Replacement for your telephone's or fax line/cable, or use as telephone extension cable..
  • ✅ UNIVERSALLY COMPATIBLE The telephone line cable is with two RJ-12 standard phone connectors on both ends, for use with landline telephones, fax machines, dial-up modems, caller IDs or other telecom devices etc..
  • ✅ HIGH QUALITY phone line cord extension cord. Each telephone line has been hand selected and tested and achieves our standards for premium quality. Heavy duty PVC jacket protects the cable's integrity.
  • ✅ FLEXIBILITY: The satin jacket encasing our phone cable provides you with increased flexibility and lies flat under carpets and along baseboards when connecting telecom devices to a phone jack..
  • ✅ PACKAGE INCLUDE: 1 x RJ12 Telephone Extension Cable with 6 Conductors and Gold Plated Contacts - 7 FT. Backed with Cmple Lifetime Warranty.
Check Stock

DZS Elec 6pcs Mechanical Endstop Limit Switch Touch Switch Module for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280 RAMPS 1.4 LKB01

  • Mechanical endstop limit switch kit, suitable for RepRap 3D Printer or CNC tool, supporting by RepRap electronics, RMAPS 1.4 and other common used....
  • High quality 70cm 22AWG connecting line, thick internal copper core, withstanding 2A current, 300V voltage. Max insulation temperature of insulating....
  • One-piece plug design, easy to install, hard to snap, convenient to plug or release..
  • Connection: Red line connect to VCC (ramps +), Black line connect to GND (ramps -), Green line connect to SIGNAL (ramps s).
  • Common used 1A 125V AC limit switch, strong universality, can be used as switching terminal element of RepRap 3D printer, CNC machine, Arduino / Mega....
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Piscifun Speed X Fishing Line Spooler Machine with Unwinding Function - Fishing line Winder Spooler Fishing line Spooling Station Works with Spinning Reel, Cast Reel and Spincast Reel

  • Unique Unwinding Function: When spooling too much line on your reel, no need to remove the reel and rewind the line back on the spool by hand. The Speed X line winder can easily help you wind the line directly back onto the spool and improves the winding efficiency..
  • Adjustable Aluminum Middle Handle: The Speed X spooling station device features an upgraded aluminum alloy connecting rod, which is 40% stronger than the plastic version. At the same time, you can also customize the length of the rod according to your own needs, which is suitable for different scenarios..
  • Upgraded Clamp: The clamp on the Speed X fishing line winder can be opened up to 4.13’’/10.49cm, which can be easily applied to different sizes line spools..
  • Conical Adpator: The conical design adaptor is suitable for line spools with apertures from 0.39’’/10mm to 0.98’’/25mm. The adaptor rotates with the line spool when winding, which reduces noise, while still maintaining the perfect spool tension. This design makes for easy and smooth operation..
  • Friendly to Different Types of Reels: Speed X winder is suitable for various types of reels like baitcaster, spinning reel, spincast reel, etc. A must have for all fishermen!.
Check Stock

Zemoner 3/8 6 Ft Fuel Line with Hand Bulb Primer Pump & 10 Pcs Hose Clamps for Boat Marine Outboard Gas Diesel Petrol

  • ▶ Worry-free combination ◀ The Package includes 6 Feet ID 3/8 " Fuel Line.
  • 2 Pcs Hand Bulb Primer. The dimensions of the three....
  • ▶ High-quality Materials ◀ Wall thickness is 3.5mm. The material is woven fiber nylon rubber, which is resistant to high temperature, high....
  • ▶ Extra Bulb Pump ◀ In the high temperature, the pump Primer is not durable enough, usually replace it every year. We have equipped an extra pump....
  • ▶ Hose Clamps ◀ Made of 304 Stainless Steel. Clamps are sturdy, strong and reliable. When connecting the fuel tank and the engine connecting these....
  • ▶ Wide Application ◀ suitable for fuel systems for automobiles, ships, helicopters, ships, motorcycles, etc..
Check Stock

Rocketfish Universal Wireless Rear Speaker Kit RF-WHTIB-A

  • ✅[Lossless Audio & low Interference] latest wireless audio technology that supports 5.2 & 5.8GHz dual-band selectable digital wireless with an....
  • ✅[Easy Connection with A/V Receiver System] comes with Speaker Line Level Input and Stereo RCA Input that can receive full band audio from any audio....
  • ✅[High Efficiency Amplifier Built-In] 2 x 50W RMS @ 4 ohms load Class D amplifier, allow you to connects directly to any passive bookshelf or the....
  • ✅[An additional subwoofer connection] provides an additional subwoofer mono input and output, for connecting between AV Receiver and Power/Active....
  • ✅[Wide Transmission Range] - Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight) with 24-bit 48KHz full CD....
Check Stock

Wire Tracker, ELEGIANT RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester for Network Cable Collation, Telephone Line Tester, Continuity Checking

  • Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester..
  • Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers..
  • Telephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state..
  • Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during opera....
Check Stock

Amazon Basics Bookshelf Speakers with Active Speaker, 80W, 20-20KHz & 16-Gauge Speaker Wire Cable, 100 Feet

  • Product 1: Pair of versatile bookshelf speakers.
  • active speaker (80-watt 20-20KHz) and 2-way acoustic design.
  • connects easily to a computer, TV, or game console for enhanced audio.
  • Product 1: Wireless Bluetooth 5.0 technology for instantly connecting a smartphone or tablet from up to 33 feet (10m) away.
  • Product 1: Controls include power on/off and volume up/down.
  • AUX input for connecting a device with a 3.5mm headphone output.
  • Product 2: IN THE BOX: 100-foot 16 gauge speaker wire cable.
  • Product 2: CONVENIENT: Connects audio speakers to an A/V receiver or amplifier.
  • Product 2: EASY DISPENSING: Comes wrapped around a hard plastic spool for simple dispensing.
  • Product 2: USER FRIENDLY DESIGN: White line on one side of wire indicates the polarity for a proper audio system set up.
Check Stock

VtteQck Copy Clone Cable Compatible for BaoFeng/Wouxun/Kenwood TK-3160 TK-272G TK3107

  • BTECH is proud to be in the USA, which allows you to have the best available local support for any issue that may arise. BTECH only engineers and....
  • Using the APRS-K1 Cable - you can begin using over-the-air (internet not necessary) APRS today!.
  • Also use the APRS-K1 cable for: APRS, Audio Recording, Line-out, Line-in, and More!.
  • A must-have interface cable to provide an easy solution for connecting your radio to your applications and equipment..
  • Includes: APRS-K1 Cable, Reverse Connector Adaptor, Quick Start Guide.
Check Stock

OXLasers Adjustable 5V 650nm Red Line Laser Module for Positioning Laser Alignment Locator for Wood Stone Fabric Cutting Laser Swamp (Line)

  • Wave Length: 650nm , mW-(100), Working Voltage: 3.7-5V,.
  • Size: 80*21mm, big heatsink , long dutycycle, can work 5-6 hours constantly!.
  • Item comes with 5V DC adapter and a mount houlder! Line wideness adjustable!.
  • Packing list : Red Laser Module*1. 110-240V AC/DC Adapter*1, Mount Stand*1 , USB-DC Cable*1 (this cable is for connecting 5V USB Power Source, more convenience to use).
  • Attention: This is a Line Laser only, its NOT a CROSS laser, please dont buy this if you need a corss laser! This line laser is for cutting positioning, not a laser that can cut! There is a CROSS LASER available, its another item, not this one!! you can visit our store front to buy the CORSS one..
Check Stock