ReviewsConnecting Threads Quilt Kitss

Eaton Aeroquip 202702-8-8S Steel Flared Tube Fitting, Adapter, 1/2\ Male JIC x 1/2\ O-Ring Boss Male (Pack of 4)

  • Joint Industry Council (JIC) male adapter for connecting a tube to an O-ring boss female.
  • Male Joint Industry Council (JIC) threads on one end and male O-ring boss threads on the other end for connecting tubes with different ends.
  • Steel for weldability and greater resistance to rust than iron.
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons.
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing.
Check Stock

Eaton Aeroquip 202702-8-6S Steel Flared Tube Fitting, Adapter, 3/8\ Male JIC x 1/2\ O-Ring Boss Male (Pack of 4)

  • Joint Industry Council (JIC) male adapter for connecting a tube to an O-ring boss female.
  • Male Joint Industry Council (JIC) threads on one end and male O-ring boss threads on the other end for connecting tubes with different ends.
  • Steel for weldability and greater resistance to rust than iron.
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons.
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing.
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

2 Pack Brass Hose Fitting Adapter 3/8 Barb x 1/4 NPT Male Pipe

  • Standard 1/4 npt to 3/8 barb for connecting a hose to a male threaded connection of a different diameter..
  • Brass material make it strongest construction for prolonged service life,Easy to use and reliable..
  • Hose barb on one end and male NPT threads on the other, no leaking and durable, easy to connect and disconnect..
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads..
  • Package include 2 Pack 3/8" Hose ID x 1/4" NPT Male Pipe brass fittings..
Check Stock

Anderson Metals 57001-0604 Brass Hose Fitting Adapter 3/8 Hose ID x 1/4 NPT Male

  • Adapter for connecting a hose to a male threaded connection of a different diameter.
  • Hose barb on one end and male NPT threads on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Anvil 8700129854, Cast Iron Pipe Fitting, Hex Bushing, 2" NPT Male x 1" NPT Female, Black Finish

  • Hex bushing for connecting two pipes of different sizes.
  • Male National Pipe Taper (NPT) threads on the outside and female NPT threads on the inside for creating tighter seals than straight threads.
  • Made from cast iron for compressive strength and resistance to wear.
  • Hexagonal head for increased leverage and use with a wrench during installation and disassembly.
  • Black finish for corrosion resistance in oil and gas applications.
Check Stock

Legines 1/4 NPT Male to 3/8 Barb Fitting Brass Barbed Adapter Straight Connector 2 pcs

  • Barb adapter for connecting a 3/8" hose to a 1/4" npt male threaded connection of a different diameter.
  • Hose barb on one end and male NPT threads on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Thread Reducer Bushing 2" Male x 1-1/2" Female Adapter Pipe Fitting with Stainless Steel 304 NPT

  • Maximum working pressure of 150 psi at 70 degrees F.
  • NPT thread for creating tighter seals than straight threads.
  • Shape:Reducer Bushing(Male x Female),Connection:NPT-NPT,Measurement:2"x1-1/2".
  • This adapter fitting connects pipes or fittings with different end types, diameters, or materials.
  • It has male NPT threads on one end and female NPT threads on the other for connecting to a female and a male threaded pipe or fitting..
Check Stock

Dixon G200-A-AL Aluminum A380 Global Type A Cam and Groove Hose Fitting, 2\ Plug x 2\ NPT Female

  • Straight body with two openings for connecting two hoses or pipes with cam and groove fittings or threads.
  • One male groove adapter end for connecting to female cam couplers and one NPT female threaded end for connecting to an NPT male threaded connection (Type A).
  • Aluminum for resisting corrosion and tarnishing.
Check Stock

Banjo V200 Polypropylene Ball Valve, Three Piece, Standard Port, 2" NPT Female

  • Polypropylene for chemical resistance and less weight than if made from metal.
  • Standard port flow for smaller valve size.
  • Inline valve for connecting two pipes going in the same direction.
  • Female NPT threads for connecting to male threaded pipe fittings.
Check Stock

NIBCO C4804 2 HXMIPT MALE ADAPTER PVC, White, 2' (C48042)

  • Adapter for connecting pipes or fittings of different types.
  • Hub opening on one end and male National Pipe Taper (NPT) threads on the other for connecting two pipes with different ends.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock