ReviewsConnectors wire Harnesses

Scosche CR02BCB Compatible with 2002-07 Chrysler, Dodge, Jeep, Plymouth Power/Speaker Connector / Wire Harness for Aftermarket Stereo Installation with Color Coded Wires and Pre-installed Wire Connectors

  • Connects to the factory stereo harnesses when installing an aftermarket stereo. Not compatible with factory amplified systems.
  • Pre terminated with butt connectors to save install time.
  • Direct Connection to the factory harness without cutting any wires.
  • Manufactured with factory quality wire and connectors.
  • EIA industry standard color coded wires for an easier installation.
Check Stock

MotoAlliance Firestorm UTV Cab Heater Kit for 2014-2018 Polaris RZR XP 1000

  • will not work with Ride Command or OEM wiper blade kit.
  • SPECS: Heat Output - 13,000 BTU at 0-125 CFM.
  • Heater Box Dimensions 8.4" x 6.9" x 5.3".
  • VERSATILE: Don't loose cab space - tucks nicely under the hood.
  • QUALITY: High-grade radiator hose rated -40 to 120 C.
  • INCLUDES: Thermostat Bypass, defrost duct hoses, vents, connectors, radiator hoses, wiring harnesses, installation hardware and instructions.
Check Stock

HPI STANDALONE WIRE HARNESS 2006-15 LS3 LS2 6.2L W/T56 58X DRIVE BY WIRE & 60A relay EV6 fuel INJECTOR CONNECTORS message us if multec/delphi or ev1 needed

  • EV6 FUEL INJECTOR CONNECTORS, email us if multec/delphi or ev1 needed) (DRIVE BY WIRE) All Harnesses are long enough for the PCM to be mounted under....
  • These are after market harnesses and ready to ship (WE CAN SOLVE 99% OF ANY PROBLEMS. SO PLEASE CONTACT US BEFORE OPENING A RETURN REQUEST).
  • GM Color Codes. Many Companies Do NOT Use GM Color Codes..
  • All Harnesses have a High Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING)1200 Degree Fiberglass Braid on All Circuits Ran....
  • All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port..
Check Stock

HeliBars HR01139 Handlebar Riser

  • READY TO GO: Our bars are Pre-wired with your control harnesses extensions, allowing you to use our “Prewired” bars with your existing switches and turn signals. Our bars come with the control and turn signal extensions Pre-Wired along with self-solder/heat shrink connectors. You simply cut your control and turn signal wires, strip a small portion of each, place them into our pre-soldered/heat shrink connectors and shrink them..
  • MODEL COMPATIBILITY: 2011 & Newer Sportster and Softail models (Dyna, Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob). Compatible with Harley-Davidson Sportster (2014-2021), Dyna (2012-2017) and Softail models  (2011-2021 , Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob).
  • 100% Made in the USA - Laser cut, CNC mandrel bent (no fat spotting), fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show quality finish. Pre-Wired for quick and easy installation. All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment. No slag inside the bar tubes makes installation easy..
  • DOMINATOR INDUSTRIES, A NAME YOU CAN TRUST: We proudly produce....
Check Stock

Scosche VW03B Compatible with Select 2002 and up Volkswagen Power/Speaker Connector / Wire Harness for Aftermarket Stereo Installation with Color Coded Wires

  • Connects an aftermarket stereo to the factory radio harnesses.
  • Not compatible with factory amplified systems.
  • Direct Connection to the factory harness without cutting any wires.
  • Manufactured with factory quality wire and connectors.
  • Standard color coded wires for an easier installation.
  • Wiring Harness For 2000 & Up Volkswagen, Bmw.
Check Stock

Attwood 14366-6 Heavy-Duty Trolling Motor Connectors 2-Wire 8-Gauge Female Receptacle

  • 6-inch long wire harnesses with butt connectors.
  • Advanced design ensures both easy installation and all-weather dependability.
  • Female receptacle (boat side) features a weather cover with face plate for convenient flat-surface mounting.
  • Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.
Check Stock

HPI 97-06 LS1 STANDALONE Wire Harness 4.8 5.3 6.0 VORTEC w/60A Relay Drive by Cable RED/Blue PCM & EV1 Fuel Injector CONNECTORS for Harness SWAP 4L60E

  • (RED/BLUE PCM CONNECTOR & EV1, FUEL INJECTOR CONNECTORS, email us if multec/delphi or ev6 needed) (4L60E)(DRIVE BY CABLE).
  • NOTE: CHECK WITH US IF YOU ARE UNSURE ABOUT FITMENT. These are after market harnesses and ready to ship (WE CAN SOLVE 99% OF ANY PROBLEMS. SO PLEASE....
  • All Harnesses are long enough for the PCM to be mounted under the dash (ADDED 36" FOR EASY COMPUTER MOUNTING).
  • 3 wire MAF and a 1 wire alternator. Has the adapter 4L80E harness that you will have to pin 2 wires into the blue pcm. Comes with ENGLISH MANUAL..
  • There are times when customers may need fuel injector adapters. We offer these adapters, If you request them, during or after the order. Please....
Check Stock

Attwood 14365-6 Heavy-Duty Trolling Motor Connectors 2-Wire 8-Gauge 12V Male Plug

  • 6-inch long wire harnesses with butt connectors.
  • Advanced design ensures both easy installation and all-weather dependability.
  • Male plug (motor side) equipped with wing tabs for easy installation and removal.
  • Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.
Check Stock

My Proparts Hub MAP Sensor Adapter Harness Wire LS1 LS2 LS7 to LS3 LS9 ZR1 L92 LSA Style

  • Assembled with OEM tooling, OEM (connector, lock, seals, and terminals),(uses OEM harness wire colors) for a perfect fit.
  • Assembled in Wichita, Kansas with USA made OEM grade TXL wire.
  • Extend The Length Of Your Factory Harness With ICT Billet Wire Extension Harnesses.
  • Highest Quality Wire Connectors On The Market, For the Most Dependable, Longest Lasting Connections.
Check Stock

Lenco Marine Inc 15103-104 12' X 12' Standard Trim Tab Kit

  • (1) Switch Kit - Choose Double Rocker, Standard or LED indicator.
  • (2) 12-gauge stainless steel Electro-Polished blades.
  • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors.
  • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length.
  • (2) 15085-001 upper mounting brackets with gland seal.
Check Stock

Lenco Marine Inc 15108-103 9' X 12' Standard Trim Tab Kit

  • (1) Switch Kit - Choose Double Rocker, Standard or LED indicator.
  • (2) 12-gauge stainless steel Electro-Polished blades.
  • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors.
  • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length.
  • (2) 15085-001 upper mounting brackets with gland seal.
Check Stock