ReviewsConstant Current

12V 20A Smart Lithium Battery Charger,14.6V LiFePO4 Battery Charger for 12 V Lithium Iron Phosphate Battery LiFePO4 Battery Recharging Support Fast Full Current Charging

  • 【Fast Full current charging】This 14.6V Lithium battery charger ,with a constant current of 20A and a constant voltage around 14.6V, and it has a....
  • 【Multiple protection functions】14.6V 20A charger with Over Current, Over Voltage, Current limiting protection, Short Circuit and Reverse Polarity..
  • 【Charging safety guarantee】Precise limit of Voltage& Current, and Automatically stop charging when fully charged..
  • 【Efficient and Environmentally Friendly】The charging efficiency can reach 88% and above high-efficiency functions, Operating Temperature: -10°C ~....
  • 【Exquisite design】With two indicator lights, red when charging, green when stopping charging,, Aluminum Case, Elegant and Reliable..
Check Stock

Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer

  • 【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
  • ultra-low input and output pressure difference..
  • 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
  • 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
  • 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
  • the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
  • 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Check Stock

yanw Battery Charger for LG L5 BL-44JH Optimus P700 P750 L7 E440 L4 E460 Motion MS770

  • 2 IN 1 USB Battery Charger. It can be used as not only a special charger, but also a charging plug for your device. Automatic constant current control....
  • Safety cut out circuit,Built-in protection circuit prevents overcharging. Constant current,constant voltage charging,automatic identification. Also....
  • Input: AC 100-240V 50/60Hz 150mA Output: DC 4.35V 600mA +/-50mA,USB Port Output: DC5.2V, 1000mA(USB) Connecter: US Plug Short circuit and overload....
Check Stock

ExpertPower 12V 20A Smart Charger for Lithium LiFePO4 Deep Cycle Rechargeable Batteries

  • LiFePO4: ExpertPower’s newest line of batteries – The No.1 Sealed Lead Acid Battery Seller on Amazon..
  • Charging Specs: 14.4V | Charging Current: 20A | Cut-off Current: 1.5-2.5A | Ideal for LiFePO4 batteries 40 amp hours and above.
  • Intelligently Programmed: Our charger is uniquely designed for 12V LiFePO4 batteries, implementing the special 2-stage constant current/constant....
  • Efficiently Easy : The charger protects your LiFePO4 battery's delicate structure by boosting charging efficiency and maximizing lifespan through its....
  • Premium Quality: The unibody aluminum alloy and cooling fan allow the charger's exterior to function as a heat sink with over-heating protection.
Check Stock

DC-DC Buck, DROK Power Supply Module LM2596 DC Buck Converter 5V-36V to 1.25-32V Step Down Voltage Regulator Stabilizer 3A 5A CC Volt Transformer Reducer

  • PARAMETER --- input voltage range DC 5V-36V.
  • output voltage DC 1.25V-32V continuously adjustable.
  • max output current 5A, recommend use of within 4.5A.
  • max power 75W, recommend use of within 50W..
  • MULTIMETER --- detect and display voltage, current, power, can be used as voltmeter/ammeter/power meter..
  • CC & CV MODE --- with constant current mode & constant voltage mode..
  • currently mode indicator & charging status indicator.
Check Stock

Bradford Protein Assay w/BSA Protein Standard, 500 Assays, 10478- by Cepham Life Sciences

  • Linear Power Supply for Super quiet Output with low ripple and clean Voltage and Current.
  • High precision DC regulated power supply with 0-30 volts and 0-5 amp outputs.
  • Two operational modes: constant voltage and constant current.
  • Cooling fan automatic activation by built-in thermo-sensor,Back-lit LED Display with a 0.1V and 0.01A resolution,.
Check Stock

1200W High Power DC to DC Boost Converter, PEMENOL DC 10-36V to 12-80V Boost Module Step-up Transformer, Adjustable Charging Power Supply for Electric Vehicles and Solar Power

  • ★High Power DC to DC Boost Converter: This module with a function of constant voltage and constant current. It can be used to provide charge for electronic devices. Suitable for voltage stabilization of solar panels, charging of batteries, lithium batteries, etc.
  • ★Wide Input Voltage and Output Voltage: Input voltage: 10-36V.
  • output voltage:12-80V. The output current can be adjusted(Max 20A). ultra-low input and output voltage difference. When the current > 18A, please strengthen the heat dissipation.
  • ★With Overcurrent and Short Circuit Protection : Double short-circuit protection (input 20A fuse).
  • with output anti-reverse flood protection, no need to add anti-reverse diode when charging.Note: There is no reverse connection protection, if you have this need, please connect a diode in series with the input.
  • ★Large Heat Sink: Large heat sink design (85mm*62mm*64mm), and it has been processed with black oxidation (black oxidation has better heat dissipation). Which can prolong the service life of the module and make the conversion efficiency of the module higher.
  • ★Widely Application: High-power LED constant current drive, Lithium battery charging, Ni-Cd or Ni-MH battery charging, Solar panels, Wind Turbines, and so on.
Check Stock

EBC-A40L Battery Tester Electronic Load 0.1-40A Large Current Lithium Battery Charge Dischage Capacity Tester, 0-5V Fe Battery Cyclic Tester

  • 【Product Parameters】 Voltage range: 0-5V voltage, accuracy: 0.2%+-0.003V, current range: 0.1-40A (maximum charging current 40A), current accuracy: 0.2%+0.01A, discharge mode: CC/CP, Discharge termination: time/cutoff voltage/manual, discharge power: 200W Max, charging method: CV constant current and constant voltage charging, charge termination: cutoff current/manual, heat dissipation: fan, power supply: AC110V..
  • 【Practical Tester】EBC-A40L is an electronic load with charging function. It is suitable for charging and discharging capacitance test of various batteries, mobile power supply discharge test, charging head power performance test, supports connecting to a computer, and realizes more extended functions through online software..
  • 【Automatic Test】The charging method is standard charging, and supports nickel-metal hydride, nickel-chromium, lithium, iron-lithium, and lead-acid. Support automatic charge-discharge-charge mode to test battery capacity. LCD display: voltage, current, capacity, time, power, energy test data..
  • 【Excellent Performance】This EBC-A40L battery capacity tester is designed for high current charge and discharge within 5V, it supports a maximum charge current of 40A and discharge of 40A. It can be connected with a com....
Check Stock

Kawish Full Automatic Car Battery Charger 12V/24V 10Amp Intelligent Pulse Repair Battery Charger Truck Motorcycle Charger with Terminal Clean Brush

  • This portable charger Maximum current is 10A, It takes about 5-7 hours to fully charge a car battery clearly..
  • This charger has 5 kinds of charge status,Constant Current Mode - Constant Voltage Mode - Float Mode - Trickle Mode - Idle Mode. Then it will stop....
  • KAWISH charger can display charge voltage ,Current,and electricity capacity..
  • Except Auto Mode,this charger have Manual mode, it use the 16.3V to charge the battery, for emergency situations, fast charging, and it's better not....
  • This charger is very safe that features 4 protection: Reverse connection protection, Low voltage protection, overheat protection, short circuit....
Check Stock

LIGHTENING DARK H10 9145 9140 LED Fog Light Bulb/DRL 5530 Chips 800 Lumens 6000K Cool White Contains 2 Bulbs

  • BULB FIT: Replacement for H10, 9145, 9140 bulb size. A direct fit for fog light and daytime running light (DRL) applications. We don't recommend using....
  • PERFECT COLOR MATCH: Custom 5530 LED chips, lumens up to 800LM, cool white color temp of 6,000K gives you a better visibility in foggy situations with....
  • IC CURRENT DRIVE: Built with constant-current circuitry, the intelligent IC current drive controls the LED work process humanly. No worry of any....
  • MORE LIFETIME: Made of high quality aviation aluminum, with much better heat conductivity and dissipation. This ensures constant cooling of the LED,....
  • PLUG-N-PLAY: The LED fog light bulbs (or daytime running light) match most vehicles' OEM sockets. Easy plug and play installation without modifying....
Check Stock

DC Buck Module, DROK Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case

  • PARAMETER --- Input voltage range DC 6V-32V.
  • Max output current 5A, recommend use of within 4.5A.
  • Max output power 75W, recommend use of within 50W..
  • GENERAL USE --- As ordinary step-down module with over-current protection.
  • DISPLAY --- Large clear digital LCD display voltage & current value simultaneously..
  • FEATURES --- Constant current/voltage mode.
  • Voltage calibration & current calibration.
  • NOTE --- 1). Output voltage is set as around 20V by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. 2). The case is packaged unassembled to avoid damage during transit. It needs to be manually installed. 3). Please carefully read the user’s manual, especially the “Cautions” before using. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual [PDF]..
Check Stock