ReviewsConstant Tension Exhaust Clamp

Roadformer 5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel (2 Pack)

  • 2 PIECES IN PACK – 5 inch Lap Joint exhaust clamp is made in high quality standard aluminized steel, used for 5 inch OD to ID exhaust system connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is using 12.9 degree high-strength fastener providing real sealing capability of leakage free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, new engineering design provides fast, easy and accurate installation..
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

190003 Tension Control Clamp Kit Replacement Compatible with Pentair Pool and Spa Filter for Pentair FNS Series Quad DE Series Filter Pumps 23-1/4 Length Black

  • Pentair Tension Control Clamp Kit -- 190003 Tension Control Clamp Kit Compatible with Pentair FNS Plus 48, 60, Pentair CCP series CCP240, CCP320, CCP420, PCC520, Pentair flt quad de 36 24 48 100 60 80, Pentair series 180008, 160340, 160301. (Please refer to your part number or dealer before purchasing to ensure compatibility.）.
  • Pentair Pool Filter -- Fits Clean & Clear Plus pool and spa filter. Also fits for Pentair FNS Plus, Quad pool and spa D.E. filters. Include: Tension Clamp, Washer, Spring Cylinder Nut Assembly. Measures 23-1/4-inch length by 2-1/4-inch height by 22-1/4-inch width..
  • High Quality Materials -- The pentair filter pool clamp made of high quality stainless steel material, can withstand the wind and the sun, prevent leak and premature failure to ensure it can work for a long time. It has been strictly inspected and tested by the manufacturer before leaving the factory,to meet or exceed OEM standards..
  • Solve Problems -- 190003 tension control clamp kit can solve filter clamp starts to get old and the threads will begin to strip, if the clamp breaks the filter tank top will explode off. Replace the filter clamp, you can protect your filter, will not cause you too much loss..
  • Features -- 190003 tension control clamp assembly easy to i....
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • ...5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

Roadformer 4 Lap Joint Exhaust Band Clamp - Preformed Stainless Steel Used to Seal Muffler Insets Outsets Elbow Joints Flex Pipes and Other Exhaust System Connection

  • Roadformer 4" exhaust clamp is to joint 4" OD pipe overlapping into 4" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • Roadformer stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer does dedicate in providing real value to our customers and end users. We set industry quality standard.
Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • ...ade of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

BLACKHORSE-RACING 4 Inch V Band Clamp with Stainless Steel Flange 4 Inch V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipe Performance Exhaust Sysformance Exhaust Pipes

  • √ 4 INCH STAINLESS STEEL EXHAUST CLAMP KIT - Complete V-band kit is ideal for performance exhaust systems, downpipes, catback exhausts, turbo back....
  • √ COMPLETE 4 PIECE KIT - This complete 4inch Vband kit includes 1x 4" V-Band clamp which is designed to accommodate the 2x stainless steel 4" Vband....
  • √ DESIGNED FOR 4" EXHAUST PIPES - This kit is specifically designed for 4" exhaust pipes. The flanges feature a recessed opening which allows for a....
  • √ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES - If you're making a downpipe, catback exhaust, turbo back exhaust, mid pipe, or up pipe for your....
  • √ EASY ON, EASY OFF - A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust....
Check Stock

Roadformer 5" Butt Joint Exhaust Clamp - Aluminized Steel for 5 inch OD exhaust pipes, muffler ends and exhaust system connection with leakage free (2 Pack)

  • 2 PIECES IN PACKAGE – 5 inch butt joint exhaust clamp is made in high quality Aluminized Steel, it is used for 5 inch OD pipes & muffler ends connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, New design provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 560 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

iDesign Forma Ultra Metal Expandable Constant Tension Shower Curtain Rod for Master, Guest, Kids' Bathroom, Adjustable from 43\-75\

  • CONSTANT TENSION RODS: Constant tension shower rod is perfect for your bathroom, shower stall, bathtub, changing area, closet, window opening, and more. Strong enough to hold shower curtains, window curtains, clothing, and other items.
  • RELIABLE HOLD: Constant Tension technology provides strong tension without shifting. Non-slip feet provide added stability.
  • EASY TO USE: Installation is quick and easy - just extend to fit opening, twist and lock into place for a firm hold.
  • DURABLE CONSTRUCTION: Made of stainless steel with brushed finials and a polished rod to provide years of quality use.
  • ADJUSTABLE SIZE: Shower curtain expands from 43 to 75 inches.
Check Stock