ReviewsConstruction Drilling

VEVOR 12Inch/305MM Core Drill Machine,4800W Core Drill Rig,Powerful Rugged Diamond Concrete Core Drill,110V 500r/m Wet Dry Concrete Brick Block Drilling Machine (Drill Bit Diameter:4.5'/114MM)

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Valvoline Multi-Vehicle Moly-Fortified Gray Grease 14.1 OZ Cartridge

  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
  • DRILLER RED GREASE: This NLGI #2 Red Grease protects heavy-duty drilling, industrial, mining, and construction equipment from wear and corrosion..
  • FORMULA: This heavy-duty red grease has a Lithium Complex base formula for superior protection and lubrication..
  • APPLICATIONS: Driller Red Grease is ideal for drilling and mining applications, backing plates, ball and chassis points, construction ball & roller bearings, idler bearings, industrial applications, U-joints, water pumps, wheel bearings, and more..
  • SPECIFICATIONS: Driller Red Grease is available in a 14 wt oz. cartridge..
Check Stock

IRWIN 1890945 Flexible Installer Drill Bit with High-Speed Steel Tip, 3/8-Inch Shank, 24-Inch Length

  • Unique combination of 135 Degree self-centering split point stepped to 118 Degree hole enlarging body for fast, easy starts and smooth drilling.
  • Hole in flute for easy wire pulling through walls, ceilings and floors.
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling.
  • Tapered flute for faster chip ejection, less binding and smoother drilling Does not apply to 1/4" diameter SKUs.
  • Premium high speed steel construction for extended drilling life in metal, wood and plastic.
Check Stock

Metabo HPT Rotary Hammer | SDS Plus | 1-Inch, 7.5-Amp | For Drilling | Chipping and Hammer Drilling (DH26PF)

  • SDS Plus Rotary Hammer for drilling, chipping, and hammeriing.
  • MOTOR: 7. 5 Amp motor that produces 2. 4 ft/lbs of impact energy for powerful hammering with fast drilling.
  • POWER: 0-4, 300 full-load impact rate delivers forcible hammering.
  • APPLICATIONS: Ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering.
  • drilling only, hammering only and hammer drilling for flexibility within a range of applications.
  • SPEED CONTROL: Electronic variable speed control gives the tool a no-load RPM of between 0-1, 110 and 0-780 in reverse.
  • ANGLE ADJUSTMENT: Available on mode selector dial to change the chisel bit to different angles.
  • LIGHTWEIGHT: Only 6. 7 lbs and compact for better maneuverability and less fatigue.
  • HANDLE: Double-molded 360 degree side handle for comfortable operation and better control.
  • EASY BIT REPLACEMENT: One-push bit mounting makes changing out bits quick and easy.
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ...drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers.
Check Stock

Fowler 52-475-050-0, All-Angle V-Block and Clamp with 1.3125\ Capacity

  • Angle Clamp: The sides of this clamp set are parallel while the V is central and ground with a central hole provided for drilling or removing pins.
  • Machinist Tool: V-block set has four 3/8"-16 tapped holes, two in the bottom and one on each side for angle non-clamping.
  • Durable Construction: Made of hardened and precision ground tool steel, this angle V-block is perfect for grinding, milling, or drilling.
  • Dimensions: This V-clamp is 3-5/8" long, 1-7/8" wide, and 1-7/8" high (including clamp) with a holding capacity of 1-5/16".
  • High Accuracy: Sides are parallel and V is central and ground to .0003".
Check Stock

TOOLGAL Diamond Core Drill Bit 5" for Masonry - Wet Drilling of Concrete/Reinforced Concrete - Laser Welded Diamond Segmented - 11/4" UNC for Fixed or Hand-held core Drilling Machines

  • SPECIFICATIONS - This diamond core drill bit made of premium metal components and high quality diamond grits - Diameter: 5" - Useful length: 18.7” - For wet drilling ONLY - Max RPM 470..
  • SMOOTH FAST DRILLING - This premium core drill bit is produced specifically for wet drilling of concrete and reinforced concrete..
  • ENGINEERED FOR EXACT FITTING - With 11/4" UNC connection, this core drill bit allow easy and fast assmbling to common fixed core or hand-held drilling machines..
  • FOR THE PERFECT JOB EVERY TIME - The innovative design of this diamond core drill bit allows it high drilling performance while keeping a long lifetime. Whether you are a plumber, construction worker, or DIY enthusiast this segmented core drill bit is made for you..
  • TOOLGAL, A NAME YOU CAN TRUST - For over 50 years TOOLGAL has been a global leader of masonry diamond tools developing and manufacturing. When you buy this core drill bit or any other tool from TOOLGAL, you are purchasing it directly from the factory..
Check Stock

ENGiNDOT Hammer Drill, 1/2-Inch 6-AMP Corded Electric Hammer Drill with 2800RPM, Variable Speed, Drill Chuck, 10 Drill Bits for Home Improvement, Concrete, Steel, Wood (NOT for Reinforced Concrete)

  • ...mer drill enables comfortable use and allows access to tight spaces. The rotating auxiliary handle, which adds flexibility and offers the best grip, easily controlled, accurate drilling..
  • What You Get: 1* ENGiNDOT corded hammer drill, 1* chuck key, 1* metal depth ruler, 5* construction drill, 5* spiral drill..
Check Stock

IRWIN 1890721 Straight Shank Installer Drill Bit for Wood, 36-Inch by 3/8-Inch

  • 82˚ point for fast, smooth drilling in wood.
  • Hole in flute for easy wire pulling through walls, ceilings and floors.
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits.
  • Premium high carbon steel construction for extended drilling life in wood.
Check Stock

IRWIN 1890718 Straight Shank Installer Drill Bit for Wood, 30-Inch by 1/4-Inch

  • 82˚ point for fast, smooth drilling in wood.
  • Hole in flute for easy wire pulling through walls, ceilings and floors.
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits.
  • Premium high carbon steel construction for extended drilling life in wood.
Check Stock

BOSCH MP500T Drill Bit Set, 5 Piece

  • Upgraded multi-grind heads – deliver up to 85% faster drilling in metal than standard bits.
  • Hex shanks and impact rated – allows use in impact drivers and hammer drill/drivers for added versatility.
  • Sharp ground cutting edges – designed for advanced performance.
  • Steep flutes with ribs – deliver fast material removal in multiple materials.
  • Multi-application design – offers drilling in masonry, brick, block, tile, metal, wood and plastic.
  • Long-life construction – provides up to 9x life in multi-material applications than standard bits.
Check Stock