ReviewsConstruction Lag Bolts

REDCAMP Indoor Hammock Hanging Kit Heavy Duty 304 Stainless Steel Hammock Wall Mount Kit 800 lb Capacity

  • EXPANSION SCREWS: This hammock hanging kit contains 2 expansion bolts and 2 lag screws. Expansion bolts are the best choice for concrete wall, lag....
  • HEAVY DUTY HAMMOCK HANGING HOOKS: the screws and washers are exceedingly heavy and thick, made out of 304 stainless steel and galvanized, support up....
  • PERFECT FOR BOTH INDOOR AND OUTDOOR USE: this set of high quality hammock hooks and carabiners can be adjusted to the ceiling of your garage or room,....
  • EASY AND FAST SET UP: This hammock holder is really easy to install, a spanner and a drill will be completely enough..
  • REDCAMP GUARANTEE: Your 100% satisfaction has always been our top priority. That is why all of our products are backed by our unconditional 365-day....
Check Stock

Decorlife 2-Pack Ceiling Swing Hook 360° Swivel Swing Hanger for Hammock，304 Stainless Steel for Maximum Load 1000lbs Wood or Concrete Ceiling Mount Included Carabiners & Hardware

  • 【What You Get】2 swing hanger, 4 screws for wood installation and 4 lag bolts for concrete installation, an extra carabiner for easy....
  • 【Safe & Secure】 Made of heavy-duty stainless steel, rustproof and corrosion-resistant. It has a strong load-bearing capacity, up to 1000lbs,....
  • 【Creative Design】 Solid construction allows 360 degrees rotation and back and forth movement, which changes directions freely without twisting the....
  • 【Multi-Use DIY Hanger】 It is flexibly used for indoor and outdoor suspension playset projects, such as hammock, swing, punching bag, gym ring,....
  • 【Easy Installation】 Unique one-piece can be set up in minutes. The bracket features two pre-drilled holes for quickly connecting bolts to concrete....
Check Stock

Ashman Ground Screw No Dig, U-Model Screw in Post Stake - 27' Inch Long, Fits Standard 4x4 (3.5' X 3.5' Inch) Great for Mailbox Posts - 2 Pack

  • Accommodates a standard 4x4 wood post (not included).
  • Made of galvanized steel. Heavy duty ground screw..
  • With this Ground Screw set you can realize your next garden construction project easily. It’s perfectly suitable as a fundament for your new terrace or summerhouse. The ready fundament is a simple solution without concrete..
  • Hardware Included: Includes tightening rod and 6 lag bolts (use two bolts on one side and three on the other)..
  • The ground anchor is simply screwed into the ground, deep enough, if need be, so that the lawn mower can glide over it. And when the season is over, it can just as easily be screwed out again..
Check Stock

How To Build Monkey Bars (On The Cheap)

  • The newest swing set bracket in the easy 1-2-3 A-frame bracket series features a 90 degree angle that allows you to extend any A-frame play set!.
  • Heavy-duty 90 degree swing set bracket features a solid, one-piece design that is open on both ends and Constructed with heavy-duty steel with welded seems for the strongest and Safest construction.
  • Swing set brackets are finished in a power-coated Green color and Eastern Jungle Gym signature yellow tag to ensure 100% Authenticity and our Warranty.
  • this listing is for one bracket with hardware.
  • Mounting hardware is included (16 5/16" x 3" zinc-coated steel lag bolts and 16 washers).
Check Stock

Venzo Bike Bicycle Bench Mount Clamp Repair Rack Stand Work Stand - Bike Maintenance

  • BENCH MOUNT: Bike repair stand mounted on a bench is more stable than portable and foldable repair stand. It can handle harsh bike mechanic or....
  • FULL METAL: The workstand is made of heavy duty steel except rubber protection coating. No more broken parts! With it's 360 degree turning and side....
  • MOUNTING HOLES: Mounting flange has four predrilled holes, allowing use of bolts or lag bolts to mount ( Mounting bolts not included )..
  • DURABLE: We understand what kind of workstand riders need. The quick release & bolts are both heat treated and approved not to be stripped anytime.....
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan..
Check Stock

LaBear 3/8\ Drive to 1/4\ Hex Drive Quick Change Impact Adapter (3/8\DR to 1/4\H)

  • Fits: 1/2” Lag bolts (Hard Heads), 5/8”, 3/4”, & 1/2” square headed bolts and nuts.
  • Handle Type: Non-conductive and Lightweight.
Check Stock

HoldRite QuickStand 22 Inch Water Heater Stand, Up to 52 Gallons, Unassembled, 40-S-22-U

  • WATER HEATER STAND: The Holdrite QuickStand Water Heater Stand safely elevates water heaters and other equipment above the floor to prevent gases and other debris from coming into contact with ignition source.
  • WHAT IS INCLUDED: The QuickStand is easy to assemble and includes (2) safety clips and (2) lag bolts.
  • assembled QuickStand measures 22 inches in diameter by 16 inches in height.
  • CONSTRUCTION: Made with galvanized steel, this water heater stand is engineered to support water heaters up to 52 gallons.
  • VERSATILE: This water stand can be installed on concrete or framed walls.
  • can also support other equipment such as tanks, washers, and boilers.
  • CERTIFIED: Water heater stands are compliant with Uniform Plumbing Code and International Plumbing Code requirements.
Check Stock

HoldRite QuickStand 30 Inch Water Heater Stand, Up to 100 Gallons, Unassembled, 40-S-30-U

  • WATER HEATER STAND: The Holdrite QuickStand Water Heater Stand safely elevates water heaters and other equipment above the floor to prevent gases and other debris from coming into contact with ignition source.
  • WHAT IS INCLUDED: The QuickStand is easy to assemble and includes (2) safety clips and (2) lag bolts.
  • assembled QuickStand measures 30 inches in diameter by 16 inches in height.
  • CONSTRUCTION: Made with galvanized steel, this water heater stand is engineered to support water heaters up to 100 gallons.
  • VERSATILE: This water stand can be installed on concrete or framed walls.
  • can also support other equipment such as tanks, washers, and boilers.
  • CERTIFIED: Water heater stands are compliant with Uniform Plumbing Code and International Plumbing Code requirements.
Check Stock

Universal Socket Wrench, Penck Self-Adjusting 7mm to 19mm Universal Sockets Multi-Function Wrench Power Drill Adapter Repair Tools Gifts for Father Men Husband Dad DIY Handyman

  • Self ajusting from standard 1/4" to 3/4" and metric 7mm to 19mm, Can be used in automotive industry, household maintenance, manufacturing industry, construction.
  • Durable chrome vanadium steel construction, Internally by 54 high-carbon steel hardness pole constituted.
  • Can be disassembled various shapes nuts, screws, hooks, lag screws, and bolt head ect..
  • This is an easy to use, universal wrench designed to deliver accurate appliance, extended bolts compatibility and increased leverage performance for maximum convenience at any type of repair..
  • This universal socket set will make a perfect gift for DIY enthusiasts and Handyman..
Check Stock

Ronlap Spring Loaded Gate Caster, Heavy Duty Ageing Resistance Rubber Gate Caster with Universal Mount Plate, 220 Lbs Capacity, 4 Inches, Black

  • 【Spring-loaded Design】: Adjustable spring bracket with up to 1-3/4” spring-loaded vertical travel, automatically adjusting gate height with surrounding terrain throughout the opening and closing cycles, effectively prevent gates from sagging to keep the fence line level.
  • 【Durable Construction】:  Thicken matte black power coat finish plating steel plate and double ball bearing bring strong load bearing support, 220lbs maximum load capacity for each gate caster, make it easy to open or close large, heavy gates.
  • 【360°Swivel Caster】: 4 inches ageing resistance rubber caster with 360°rotation top plate, great in mechanical strength and loading capacity, easily transform to any directions that you want, enable you spend little strength to move gate safely.
  • 【Shock Absorbtion】:  Built-in spring-loaded clamp acts as a shock absorber when gate caster is rolling over uneven or rough surfaces, reducing stress on gate hardware, extending the life of a gate’s posts and hinges.
  • 【Easy to Install】: Heavy duty universal mounting plate with 3 holes to easily attach to wooden gates with lag bolts, the versatile hole pattern also allows for easy mounting to a tubular farm gate along horizontal or vertical gate rails, mounting bolts and screws a....
Check Stock

Bay Swings | Swing Set Brackets | Swing Frame | Wood Swing Set Kit | DIY Swing Set Hardware Kit | Made in USA

  • The Strongest Brackets to Build A Swing Set: Made of heavy gaugesteel, 100% welded joints, heavy and durable. Also painted nicely to stay rust free for a good looking swing set for years to come..
  • What You Get: 2pcs end brackets, 1pc middle bracket, 52pcs washer.
  • 52pcs screws. If you are missing parts. Please contact customer service for help..
  • Super-Strong for Your Kids' Safety: These heavy-duty play set brackets come in rugged welded steel in a brawny, heftier weight. Tested to safely support kids ages 3-12..
  • Building a backyard swing set: Don't worry about measuring angles and cutting wood, our brackets allow you to simply slide the wood into the bracket and screw in the lag bolts. You won't believe how quick and easy it is to build your swing set!.
  • Solid Construction: Our brackets are a solid, constructed with heavy-duty steel and welded seems for the strongest and safest construction..
Check Stock