ReviewsConstruction Machinery

GKEEMARS Industrial Signal Alarm Tower Lamp LTE-1101J AC 110V, LED Rotating Strobe Warning Light with Buzzer for Emergency (Yellow)

  • High intensity LED signal light with low power consumption, can be viewed easily at a distance.
  • Long lasting LED light-100000 hours lifespan, built-in buzzer-90db beep alarm, durable construction for long lasting use.
  • Each tier of lights can be switched to continuous or flashing light modes.
  • Rated IP54 against dust and moisture, NEMA 5.
  • These are Andon lights for use in factories or on industrial machinery. Typical uses are as Automated machinery status lights, operator signal lights, or as lean tower lights.
Check Stock

SH-1 Digital Hour Meter Waterproof Industrial Generator Timer with LED Display for Machine Generators Air Compressors Water Pumps Cranes Cars 6-80V Black

  • SH-1 quartz electronic fully sealed timer with high accuracy, stable performance and reliability.
  • Fully sealed design, long service life, strong adaptability to the environment..
  • Easy to use, suitable for standard industrial timing, widely used in construction machinery, agricultural machinery, generators, air compressors,....
  • At the same time, the product can provide data reference for the use and maintenance cycle of preciseness instruments and equipment..
Check Stock

Centerforce N1747 Centerforce ® Accessories, Throw Out Bearing / Clutch Release Bearing \88 Buick Century 2.8L ( 173 ci )\

  • Mainly used for textile machinery, printing machinery, automotive industry, household appliances and more..
  • Enough room for grease to store with a longer relubrication interval..
  • High quality bearing steel, durable with high hardness..
  • Hard bearing steel with strong bearing capacity, not easy to deform..
  • Ensure that the clutch can be smoothly engaged, soft to disengage, reduce wear, and extend the life of the clutch and the entire driveline..
Check Stock

Titus Economy Series Earmuffs - Yellow 21 NRR Rated - Hearing Protection

  • Silence Any Environment Affordably - Titus Economy.
  • Pull struts make for a 1 Size Fits All Design.
  • 21 NRR CE EN 352-1 ANSI S3.19 Approved, Ready For Shooting and Other Loud Environment.
  • Soft Padded Ear Cushion for a Snug Comforable Fit - High Quality Durable Outer Construction Ready For Abuse.
  • Industrial Quality - Ready for Construction, Shooting, Hunting, Industrial Work, or even Heavy Machinery.
Check Stock

Split Ring Pliers (3 Pack)

  • HHIGH QUALITY: TOOLEAGUE circlip pliers with a forged and hardened CR-V steel construction, Each snap ring plier is treated with nickel and iron to improve corrosion resistance. The high-quality quality guarantees the repeated use and long-term use of the product..
  • REASONABLE DESIGN: The snap ring pliers adopt the ergonomic design, non-slip handles, high-quality springs, stable opening and closing, perfect control of the whole, and provide users with a comfortable working experience..
  • LABOR-SAVING DESIGN: One-piece 90-degree folding corners, refuse to break, easy to manipulate, and have a longer service life. Owning a good circlip plier can make your work easier and improve efficiency..
  • WIDE RANGE OF USES: used in equipment, machinery industry, industrial assembly, household appliances, vehicles and other DIY maintenance, such as bicycles, agricultural machinery, locks, and other bearings fixed installation and disassembly.
  • WHAT YOU GET: 1x Straight Internal Plier, 1x Bent Internal Plier, 1x Straight External Plier, 1 x Bent External Plier, 1 storage bag. It is convenient for better storage and carrying..
Check Stock

36774321 Drive Coupler for Ingersoll Rand Doosan Portable Air Compressor Replacement Part Flexible Coupling Slotted Disc

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Construction 2 + 3 Switch Bundle (Nintendo Switch)

  • European and American versions on one Switch cartridge.
  • huge number of authentic licensed machinery.
  • new cockpit view - Enjoy these powerful machines from the inside for a first-hand feel (CS3 only).
  • exciting challenges await - from repairing crumbling roads to building a railway bridge.
  • every possible machine requirement covered - tractors, cranes, loaders and dump trucks - you will find them all in construction simulator.
  • licensed partners include caterpillar, LIEBHERR, palfinger, Bell equipment, still, Atlas, Mack trucks, meiller.
  • optimized graphics Demonstrate true realism.
Check Stock

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

IMPACTO BLACKMAXX Blade L Anti-Vibration Slash Resistant Glove Blue PR

  • Special Design to Absorb Impact- Efficiently reduce impact of tool vibration on the hand while working with any handheld tools and machinery. Reduce exposure that can affect nerves, muscles, and joints of the hand, wrist, and arm..
  • Durable Wear-resistant reusable gloves are perfect for extra heavy duty works including power drill, jackhammer, break hammer, lawn mower, weeder and all other vibrating tools and machinery. Textured palm design gives you strong grip while providing supporting..
  • Keep your hand protected and covered with non-slip heavy duty rubber latex-coated, yet breathable glove made with cotton blend keeps hands dry. The wrist knit finish keep debris from getting into your gloves and ensure perfect fit..
  • Perfect for Variety of Jobs- Great to use with any hand-held power tools and hand-guided equipment. Can be used in construction site, lumber work filed, farm, factory, and garden..
  • Glove Size: Large (Length: 9.5”, Width: 4.5”).
Check Stock

Belimo | Z3075Q-J+CQB24-3 | ZoneTight | 0.75\ | 3 Way | 5.9 Cv | w/ Non-Spg | 24V | On/Off/Floating

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock