ReviewsConverter Pcb

ANMBEST 10PCS USB 3.1 Type C Connector 24 Pins Male Female Plug Socket Receptacle Adapter to Solder Wire & Cable 24P PCB Board Support Module

  • [FASTER DATA TRANSFER] Data transfer speed is up to 5Gbps, and Sync movies, music, and more in seconds. It supports up t[FASTER DATA TRANSFER] Data transfer speed is up to 5Gbps, and Sync movies, music, and more in seconds. It supports up to 3 Amps of power output for charging your devices.o 3 Amps of power output for charging your devices..
  • [DURABLE METAL BODY] The converter connector is gathered with aluminium alloy metallic minimalist, ensuring longer life span even plug in and unplug it hundreds of times..
  • Attached with PCB board, convenient for welding and wiring..
  • [APPLICATIONS] Type C interface is widely used in mobile phones, tablets, laptops, and extended data cables, charging heads, mobile power supplies and other digital accessories..
  • Package includes 5 piece male plug & 5 piece female socket..
Check Stock

USB to 12V Car Cigarette Lighter Socket Female Step Up USB to 12V Cable Converter for Car Cigarette Lighters Driving Recorder Car DVR

  • NOTE: Cigarette Lighter Socket Output: 8W, 12V, 0.8A Max. Please check the power of your device to make sure it is less than 8W. This cable should be used at least 5V 2A or higher current..
  • Fit for many 12V 8W devices, such as: Driving Recorder, GPS, Radar Detector, Heated Seat, Led Lining Strip, Led Light, Fan. Not Support tire inflator, car fridge, car cleaner or other devices with more than 8W of power..
  • USB Port Power Converter, convert power from USB port to 12V car cigarette lighter socket. Easy to power on your car electronic equipment by extra power (such as a power bank)..
  • Length: 1.0m / 3.28 ft. The part of PCB board is moulded by PVC which is hard to damage..
  • Synchronous Rectification: The conversion rate is 95% or more, lower heat and long working time..
Check Stock

Massive Audio P8 Primo Series. 3,500w RMS / 7000w MAX, 0.5 Ohm Stable, Class D, Monoblock Mega Car Amplifier with Bass Boost & Clip LED

  • HIGH POWER CAR AUDIO AMPLIFIER: These high quality amplifiers are extremely powerful! This 12 volt car audio amplifier features: 1400 x 1 RMS @ 2 Ohm / 7000w x 1 Peak Power, Freq. Response 10Hz - 220Hz, Built-In OEM Line Converter, Bass Boost 0dB~12dB. Our monoblock amplifiers for cars, boats and off road vehicles provide rich clean power for your subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND: Our amplifiers are very efficient and powerful and provide you with a real value that you can hear for yourself. Our mono car subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal. This Primo P8 incorporates a clip liit switch that allows up to 16.5 Volts plus a Parametic EQ with 0 - 12 dB Bass Boost for even more customization..
  • QUALITY TESTED AND GUARANTEED TO GO BEYOND RATED POWER: Hits its full power or more all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. Also, by sensing the DC offset of a factory radio it can activate the Built-In (ATO) Auto Sensing Turn On Function (Hi-Low Converter).
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER: Don't settle for underpowered and underwhelming car stereo monoblock amplifiers! With our extra features like 12V Rem....
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

for PS2 Sata Adapter, Upgrade Board for PS2 IDE Original Network Adapter for Game, A LargeCapacity for Sata Hard Disk Adapter

  • 【Specially Design】 Precise cut, perfect fitness, suitable for PS2 IDE original network adapter, connect a SATA hard drive to your console, and use the loader to play games from the hard drive.
  • 【Save Game Loading Time】Use this SATA network hard disk adapter for PS2 IDE original network adapter, A large capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time..
  • 【Easy to Install】Equipped with mounting screw pack, which makes it easy to install and detach.Efficiently simplify your work!.
  • 【Good Performance】The Sata HDD hard disk converter adapter for PS2 console made of high quality PCB board material, with fast operation speed and excellent performance..
  • 【Portable SATA Network Adaptor】Upgrade sata adapter for PS2 is small and lightweight, convenient for us to storage and a good replcement accessory..
Check Stock

DTECH FTDI USB to TTL Serial 5V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 10 8 7 Linux MAC OS 6ft Black

  • 6 ft FT232 USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header 5V TTL to USB converter cord is compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 11 10 8 7 Linux 6ft Black

  • 6 ft FT232 USB to TTL serial adapter 3.3V (with 6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data....
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header USB TTL UART converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, MacOS, Linux 2.4 and greater.
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable TX RX Signal 3 Pin 0.1 inch Pitch Female Socket FT232RL Chip Windows 11 10 8 7 Linux MAC OS 6ft Black

  • 6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (3 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and 3.3V UART signals can be individually inverted by configuring the EEPROM.
  • 3V3 TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

2Pack PL2303 PL2303HX USB to TTL Serial Adapter 3.3V Debug Cable USB to RS232 TTL Converter 4 Pin Female Socket Download Cable PL2303HX Cable

  • Specific Interface A: USB 2.0 type A Male Port.
  • Interface B: 4 pin Female Socket flying leads. Prolific chipset on the PCB board....
  • USB to TTL serial cable 3.3V (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND(ground), RX and TX at....
  • TTL to USB Converter Support Windows XP/Vista/7/8.
  • Ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash....
  • Application:PL2303 USB to TTL serial adapter is designed to be used for USB to TTL electronic projects, easy to connects devices with 3.3 V logic....
  • Note: 3.3V and 5.0V output is set (this is the power supply to the microcontroller, upgrade machines do not need the small plate) unplugged from the....
Check Stock

DTECH USB to TTL Serial 3.3V Adapter Cable TX RX Signal 4 Pin 0.1 inch Pitch Female Socket PL2303 Prolific Chip Windows 10 8 7 XP Vista (6ft, Black)

  • 6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port.
  • A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND.
  • PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE.
  • ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc..
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock