ReviewsCoolant Hose Clamps 2

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

YSTOOL Hose Clamp Plier Removal Installation Tool Set Hose Remover Kit 9PCS for Constant Tension Clamp Ear Clamp Clic-r Clamp Spring Hose Clip on Fuel Oil Line Coolant Tube Water Pipe

  • Universal 9PCS hose clamp plier set falls into 2 types: hose clip removal tools and hose removal tools. Specifically used for assembly and disassembly of a variety of hoses such as fuel line, soft oil tube, flexible water pipe, radiator hose, coolant hose, etc. Ideal for househood, mechanical and electrical maintenance, auto repairing service and other fields. Very simple to operate, orient, center, move and then release the clamp with the right tool, remove the hose manually..
  • A must have hose clip remove tool kit. 5 hose clip pliers are of different size, slot and shape, can easily reach into limited position and remove clips like constant tension clamp, ear clamp, clic-r clamp and spring hose clip at a long distance. Hose removal hook and hose remover plier can comfortably detach hose, especially remove hose from the barbed metal pipe. Fast and efficient, save time and effort. Blue case keeps each tool safely fixed in the slot, keeps your workspace clean and tidy.
  • Hose removal plier tools equipped with excellent ratchet locking mechanism that can be locked or released at will, allowing for hose clip removal with smooth ratcheting action. When using, press the lock tab with thumb to unlock and open the pliers first, align the "wings" of the hose clam....
Check Stock

ANEX Stainless Steel Rubber Grip Pincers Pliers Pin Bending Type No.256

  • 【Widely Application】 Perfect for installing and removing single ear hose clamps, double ear clamps, stepless clamps, which widely used on CV boots, coolant and fuel lines, air pressure systems, compressors..
  • 【HIGH QUALITY】 Made of high quality carbon steel for durability and long-lasting..
  • 【Comfort Grip】 PVC handles for anti-slip and comfort grip..
  • 【Dimension】 220 x 48 x 16mm/8.7 x 1.9 x 0.6"..
  • 【ANTI-RUST OIL】 The antirust oil may be appeared on the pliers, it can protect the pliers from rusting. It's not dirty or used products, you can clean it with a towel and it will not effect the function..
Check Stock

ATPEAM Hose Clamp Pliers Pinch Off Pliers Set 3 PCS Plastic Fuel Line Clamp Pliers Set for Fuel Hoses, Gas Lines Brake Hoses, Radiator Hoses, Coolant Hoses (3pcs Straight)

  • 【Wide Application】ATPEAM hose clamp pliers pinch off pliers set includes three sizes clamp plier tools to fit for many types of flexible tubes, is great for automotive flexible hoses, fuel hoses, gas lines brake hoses, radiator hoses, coolant hoses, lawnmower fuel gas lines, water soft pipe, heater hose, and more..
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

2 PCS Flat Hose Clamp Plier & 45° Angled Flat Band Hose Clamp Plier, Car Water Pipe Locking Pliers Flexible Ring Type Hose Clamp Pliers for Installation of Low Radiators and Hose Removal Tool

  • 【Top Alloy Steel】: Chrome vanadium steel precision forging, with a manganese phosphate coating to prevent rust and corrosion. It delivering maximum life and durability in heavy use..
  • 【Efficient Unlock】Jaws rotate to access hose clamps from any angle and to provide better gripping action. Flat & Band hose clamp pliers spring loaded for easy use , which is easily released with the thumb lever, strong automatic rebound function..
  • 【Fully Flexible】Flexible use of the plier rotary joint, the rotating jaws can be satisfied with reach narrow and hard areas, and will let you fast cut, will able to concentrate on real repairs, rather than wasting time playing with clamps..
  • 【Super Labor-Saving】 Hose clamp pliers are insulate handles, comfortable for operation, the handles made of PVC. You could freely and comfortable to hold clamp plier. Non slip dipped handles, less labor..
  • 【Use For】For most ring type and flat band type hose clamps. Use for fuel & coolant pipe spring clips, Perfect for automobile, industrial and home repairing, apply to the mechanics or engineer..
Check Stock

Silicone Radiator Coolant Hose Kit Clamps For Kawasaki NINJA ZX6R 2005 2006 Red 3pcs

  • Made with correct bends and curves for perfect fitment,For Kawasaki NINJA ZX6R 2005 2006.
  • Thickness 4.5mm ,3-Ply Nylon for Strong Reinforcement.
  • Made of High Quality Silicone for Enhanced Strength and Durability.
  • Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant heater hoses..
  • Includes stainless steel industrial grade embossed hose clamps which would not cut thru the silicone hoses..
Check Stock

Hose Clamp Pliers Plastic Pinch Off Pliers Hose Pinching Plier Set for Flexible Hoses, Fuel Hoses, Brake Hoses, Coolant Hoses, 3 Sizes 6 Pack Red.

  • 6 Packs / 3 sizes hose clamp pliers to meet your different requirement. Small - 2 packs 6.1 inch (15.5cm) / Middle - 2 packs 7.3 inch (18.5cm) / Large - 2 packs 10 inch (25cm)..
  • This pinch pliers set are great to use on flexible hoses, such as brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses and more..
  • Lightweight and durable clamps with smooth, rounded jaw edges to effectively prevent damage to internal hose reinforcement..
  • Anti-slip handle make you easy to control and reduce hand fatigue, with using the safety buckle to lock into position and free your hands to repair..
  • Hose pliers are made of insulation nylon material, non-conductive to ensure security, and the red bright color is easy to find..
Check Stock

WINL Stainless Steel Hose Clamps - 22 Pack Worm Gear Drive Hose Clamps Micro Size 6 Clamping Range from 5/16 Inch to 7/8 Inch 8mm-22mm for Automotive Plumbing 1/2 Hose Clamps 3/4 Hose Clamps

  • Premium Materials: WINL size 6 hose clamps of 8mm-22mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The micro size #6 hose clamps have clamping range from 5/16 inch to 7/8 inch (from 8mm to 22mm), great for hose or pipes within this range, perfect as 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps, 5/8 inch hose clamps, 3/4 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL size 6 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burr....
Check Stock