ReviewsCoolant Supply Adapter

Robinair 75700 CoolTech Coolant Exchanger

  • 10 minute exchange process means no more waiting for the engine to warm up.
  • Engine off feature removes pulleys belts and fan blades from the safety equation.
  • Vacuum mode creates a push/pull exchange process allowing the technician to safely remove high pressure in a hot system.
  • Leak check feature allows the technician to test for leaks prior to refilling.
  • Two external new coolant supply tanks allow on-board storage of two different coolant types.
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • ...stance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

K-Swap Coolant Temperature Sender Sensor Adapter K20 K24 Engine Swap Fit for Honda Civic with Fittings Adaptor 3/8-1/8NPT

  • FUNCTION: To make sure that your cluster still keeps you informed of the Temperature of your engine you need to install this Adapter..
  • APPLICATION: This K-Swap Coolant Temperature sender Sensor Adapter Fit for Any k-swap engine k20 k24，Acura integra，Honda civic，Honda Crv，Accord，Crx，MR2..
  • FEATURES: This adapter replaces the OEM idle air assist vale (not used on K-Swaps) leaving you with the perfect spot to thread your sensor into..
  • PACKAGE INCLUDE: 1x Fitting Adaptor，1x Universal Coolant Temp Sender Sensor..
  • FREE RETURN AND WARRANTY: We accept free return and replacement if it is not the correct one. And Guarantee with One Year Limited Warranty..
Check Stock

Coolant Filtration Filter Kit For 03-07 Super Duty Ford 6.0 6.0L Powerstroke Diesel

  • For 03-07 Super Duty Ford 6.0L Powerstroke Diesel.
  • Kit Includes: Coolant Filter, Mounting Hardware, Return Hose Assembly, Supply Hose Assembly, Hose Clamps, Ball Valves,Etc..
Check Stock

MASTERCOOL 43013 Vacuum Type Cooling System Filler Kit

  • kit can be hooked underneath the vehicle's hood for easy access.
  • no need to undergo time-consuming air bleeding after refilling new coolant.
  • Conical adapter Offers a wide application to different radiator filler necks.
  • Minimizes the risks of engine overheating.
  • kit Includes vacuum purge and refill tool, coolant Hose, 1 universal radiator cap.
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock

LEIMO KPARTS   Spill Proof Coolant Filling Funnel Kit,Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • Ultimate Multi-vehicle Funnel Kit: 4 cap adapters, 5 filler neck adapters, 3 extensions, a stopper, and a high quality transparent coolant funnel form a funnel kit more complete than others.This spill free funnel kit that works better than just any old radiator fill funnel or coolant filling kit with a coolant funnel adapter.
  • Our Spill Proof Radiator Coolant Filling Funnel Kit, allows you to easily refill automotive cooling systems without having to worry about spilling, which could lead to squeaky belts and trapped air pockets that can impact performance. The spill-free funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance..
  • Near Universal Fitment: This spillfree funnel is ideal for an engine flush, a coolant pressure tester kit, even for a radiator flush.
  • Coolant refill kit features near-universal fitment for American and foreign vehicles.
  • Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • This fluid funnel features a fluid stopper to p....
Check Stock

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

Stant 12036 Cooling System Pressure Tester Threaded 'System' Adapter

  • Stant’s Engine Cooling System Pressure Tester adapters make it quick and easy to hook up a Stant Cooling System Pressure Tester to just about any automotive cooling system.
  • Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle’s coolant filler neck to the Coolant Pressure Tester.
  • The 12036 Tester System adapter allows the testing equipment to attach to the vehicle’s filler neck.
  • Fits many late model Audi, Porsche, and Volkswagen cars.
Check Stock

Laboy Glass Liebig Condenser with 24/40 Joints 300mm in Jacket Length Used in Reflux or Distillation Aapparatus Chemistry Lab Glassware with 10mm Glass Hose Connections

  • ....As jointed glassware part,it is usually used with a round bottom flask,a three way distillation adapter,a take off adapter to assemble a distillation or reflux setup..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • BUY WITH CONFIDENCE----100% 90 DAY MONEY BACK GUARANTEE simply return for a full refund,no question asked.
Check Stock

Stant 12043 Cooling System Pressure Tester Threaded 'Cap' Adapter, 1 Pack

  • Stant engine cooling system pressure tester adapters make it quick and easy to hook up a Stant cooling system pressure tester to just about any Automotive cooling system.
  • Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle's coolant filler neck to the coolant pressure tester.
  • 12043 is a threaded adapter that allows the cooling system pressure tester to work on 2013 Ford escape and Fusion models as well as select Mazda vehicles.
Check Stock