ReviewsCoolant Through Cutting Tool Set

uxcell 28mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

  • High Speed Steel tool - 28mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

uxcell 21mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

  • High Speed Steel tool - 21mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

Dormer EP016H Powdered-Metal Steel Machine Spiral Point Threading Tap, Black Oxide Finish, Round with Square End Shank, Plug Chamfer, M22-2.50mm Thread Size, 18.0mm Shank Diameter (Pack of 1)

  • Powdered metal substrate offers superior performance that approaches that of solid carbide tools but with the toughness and shock-resistance of high-speed steel.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • Round with square end shank, spiral point.
Check Stock

uxcell 14.5mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

  • High Speed Steel tool - 14.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

PROXXON Rotary Tool MICROMOT 60/EF 28512

  • For drilling, milling, grinding, polishing, brushing, cutting and engraving, for working steel, precious metals, glass, ceramics, plastics, etc..
  • Ideal for electronic hobbyists, model-builders, mechanics, jewellers, opticians, artists, chiropodists, dental technicians, etc..
  • Quick-action chuck and electronic speed control, with feedback effect (high torque at low rpm's).
  • With low safety voltage. Therefore, also suitable for working with coolant (wet grinding and cutting).
  • Scope of delivery: 1x PROXXON Rotary Tool MICROMOT 60/EF including quick-action chuck. Part number: 28512.
Check Stock

BILT HARD 2.5-Amp 9-inch Band Saw, Benchtop Bandsaw for Woodworking, with Blade and Miter Gauge - CSA Listed

  • HORIZONTAL OR VERTICAL POSTIONS: Large 9" x 12" infeed table assembly extends the support area..
  • REPEATABILITY: Micro-adjustable tool-less material stop for accurate set-up..
  • DURABILITY: Blade wheels are made from flanged cast iron..
  • LONGER BLADE LIFE: Base contains a coolant system that helps to increase cutting efficiency and blade life..
  • CSA/CUS CERTIFIED: This saw follows strict guidelines and electrical requirements..
Check Stock

TOPPROS 1 inch Split Point Tip HSS High Speed Steel Black Oxide Twist Drill Bit 1/2\ Straight Shank

  • High Speed Steel tool - 25mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

uxcell Reduced Shank Drill Bit 27mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank

  • High Speed Steel tool - 27mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • FUNCTION: This coolant vacuum refill kit performs vacuum pressure test and coolant vacuum fill services. Use an extra vacuum pump to work with this airlift coolant refill tool to form a vacuum in the cooling system, then draws coolant into the radiator. Quickly refill the system with no air pockets or hotspots produced, avoid warping or other damage in engine. This cooling system vacuum purge & refill kit is widely suitable for various domestic and foreign cars, SUVs, vans and trucks.
  • MATERIAL & USAGE: cooling system coolant refill tool has taken reliable metal construction to ensure durability and good air sealing. Equip with splendid aluminum & brass manifold body with rubber-covered pressure gauge (Range:-30~0 inHg/-76~0 cmHg). Brass T-connector can connect with vacuum pump for vacuumizing, and two standard air plugs (American & European style) are provided. 60" long coolant filling hose with quick plug can be inserted into the manifold body for refilling coolant.
  • Antifreeze filler kit includes a O.D. 32mm rubber adapter and 3 sizes adapter sleeves, with O.D. 45mm 40mm and 35 mm, fit for most types of vehicles. The adapter sleeves can be attached on the adapter on refill tool, and then replace the radiator cap to seal the cooling system, to help rad....
Check Stock

uxcell Reduced Shank Drill Bit 21.5mm High Speed Steel HSS 4241 with 1/2 Inch Straight Shank

  • High Speed Steel tool - 21.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance..
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes..
  • Polished Finish - Polished treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge..
  • Wide Application - Drill low and medium tensile strength materials, such aluminum, iron, copper, brass and metal. Reduced shank drill bit is widely suitable for wood processing. (Hardness of the material to be drilled should not exceed 29HRC.).
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals, and the feed speed should be controlled. Increased use of water lubrication will extend drill bit life..
Check Stock

Auniwaig Reduced Shank Drill Bit, HSS Drill Bit 1', High Speed Steel with Straight Shank for Iron, Cooper, Aluminum Plate, Metal

  • 【Material】- High speed steel 6542 is designed to ensure sharp and fast execution in metal surface for clean results.
  • 25.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • 【Advantage】-Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • 【Special Design】-Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • 【Wide Applications】- Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
Check Stock