ReviewsCoolant Trough Tool Holder

ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch

  • SAVE COOLANT & SAVE TIME: The ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch is a lifesaver when performing fuel line or coolant maintenance.
  • Easily pinch off cooling hoses instead of losing coolant and it spilling all over engine on certain jobs such as valve cover gasket replacements.
  • No need to drain systems before servicing.
  • Ratcheting jaws allow for automatic locking to save you even more time.
  • EASY TO USE: Simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose.
  • Plier jaws swivel to ensure a complete shut off.
  • 3-IN-1 SET: Package includes (3) pinch off pliers – a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long tool with a 2-inch (5.1cm) contact area.
  • VARIOUS APPLICATIONS: Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink.
  • Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank.
  • This entire set can safely be used on washing machine drain hoses, automotive hose lines, radiator lines, fuel l....
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • Radiator pressure tester & coolant vacuum refill kit mainly includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1PC universal cone rubber adapter, fit nearly any type of radiator openings on vehicles at home and abroad, helping detect and determine whether the water tank is leaking and fill the coolant under vacuum. There are also 3PCS radiator cap adapters and 2PCS connectors checking the radiator caps for leaks..
  • Radiator pressure tester is composed of 3" pressure gauge(0-35 psi.
  • 0-2.5 bar), aluminum cylinder pump and 21" long rubber hose. Manual radiator leak tester features fast pressure relief function and quick disconnect for convenience. Use the hand gauge tester pump tool to pressurize the radiator / cap and observe whether the pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass....
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

  • 10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
  • Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for less spindle and changer maintenance..
  • Free Wrenches & Pull Studs: Three free wrenches for extra tightening and easy release if necessary. 10 free HAAS pull studs. Ideal for CNC Lathe/milling, drill press, and heavy duty hand tools..
Check Stock

Coolant Vacuum Refill Tool Kit Engine Cooling System Vacuum Purge & Refill Kit New Coolant Bleeder Kit with 4 Rubber Sleeves & 1 Universal Adapter Cone Plug (with Carrying Case) (4 Connectors)

  • VACUUM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
  • WIDELY USAGE RADIATOR PURGE AND ANTIFREEZE REFILL TOOL: JIFETOR antifreeze filler kit includes a universal tapered rubber adapter, with MIN. diameter 1.5CM and MAX. diameter 5CM, fits for almost all types of vehicles. The adapter can replace the radiator cap to seal the cooling system, and connect with the quick coupler on coolant refiller to help to fill antifreeze..
  • WATER TANK COOLANT VACUUM REFILL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30~0inHg (-76~0cmHg), and normally -25~-20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Also there is a 21" metal chain hoo....
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit, Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set, with Adapter Case Hose for Car Van SUV Truck

  • MULTIFUNCTION: The set is a all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions. The hand pump tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Pneumatic vacuum filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Coolant system leak checker and filling tool set is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suitable for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin mater....
Check Stock

CASOMAN 3PC Hose Pincher Pliers Set, Locking Ratcheting Hose Pinch Off Pliers for Automotive Hose Lines, Radiator Lines, Fuel Lines, Coolant Lines

  • The metal pliers sets are durable an safe to use on all hosers, make it more faster and easier than plastic hoe pinchers..
  • 3Pcs Hose Pincher Pliers Set Include: a small 8-inch long tool with a 1.9-inch contact area.
  • a medium 10-inch long tool with a 2.5-inch contact area.
  • a large 12-inch long tool with a 2.5-inch contact area..
  • Easy to use, simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose.
  • Plier jaws swivel to ensure a complete shut off..
  • Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink.
  • Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank..
  • When performing fuel line or coolant maintenance, this set can be safely used for automotive hose lines, fuel lines and coolant lines without damage..
Check Stock

Radiator Pressure Tester Vacuum Refill Tool Kit - 28PCS Coolant System Leak Tester and Pneumatic Purge Fill Set with Adapter Refill for Vehicle

  • 【Multi-Function】Integrating three functions as leak cooling system,coolant refilling and temperature measurement in one.Coolant Pressure Tester can not only detect internal engine leaks caused by blown head gaskets and cracked block or heads,but also external cooling system leak.The vacuum fills coolant tool automatically fills coolant and eliminates air pockets under vacuum to avoid engine distortion or other damaged.Thermometer to check if coolant temperature is too high.All in 1,more choices!.
  • 【Wide Applications】Cooling system pressure tester is equipped with 17 specific adapters and 1 universal tapered rubber adapter and 3 radiator cap test adapters and 2 connectors, compatible with most of domestic & imported vehicles and works on 99% of the coolant systems.Color code radiator tests caps make it easy to choose the suitable tests cap for the job of messy.A fascinating gift for car lovers and a useful set of tools for families..
  • 【Value for Money】Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosive and wearproof. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe, and normally -25 to -20inHg is right time to add coolant. 24" rubber resin material weave reinforced hose, featu....
Check Stock

MASTERCOOL 43013 Vacuum Type Cooling System Filler Kit

  • kit can be hooked underneath the vehicle's hood for easy access.
  • no need to undergo time-consuming air bleeding after refilling new coolant.
  • Conical adapter Offers a wide application to different radiator filler necks.
  • Minimizes the risks of engine overheating.
  • kit Includes vacuum purge and refill tool, coolant Hose, 1 universal radiator cap.
Check Stock

Union Butterfield 3300(M) High-Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M8-1.25 Thread Size

  • Cold-forms threads in through holes and blind holes without producing chips.
  • Rol-Form design includes oil grooves in larger sizes to improve coolant flow.
  • Produces ANSI standard right-hand threads in metric sizes.
  • High-speed steel for compatibility with a variety of materials.
  • Round shank with square end helps to minimize rotation in the tool holder.
Check Stock

Union Butterfield 3300(UNF) High-Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H3 Tolerance, #5-44 Thread Size

  • Cold-forms threads in through holes and blind holes without producing chips.
  • Rol-Form design includes oil grooves in larger sizes to improve coolant flow.
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications.
  • High-speed steel for compatibility with a variety of materials.
  • Round shank with square end helps to minimize rotation in the tool holder.
Check Stock