ReviewsCoolant fed Tool Set

JIFETOR Radiator Pressure Leakage Tester Tool Kit, 14PCS Automotive Cooling System Water Tank Leak Test Detector Set with Aluminum Hand Pump and Adapters

  • ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • WIDE USAGE: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible with Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on. All these adapters are color coded, number marked and placed exclusively, can be easily selected according to the marked number in instruction, convenient and no confusion. Check if the adapter caps are suitable when get the kit.
  • HAND PUMP LEAK DETECTOR: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and....
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak checker tool set is equipped with 3 specific aluminum adapters and 10 nylon adapters , solid and durable, widely compatible for Mercedes (W123, W126, W124, W201), GM(Buick), Jeep Peugeot, Subaru, Chrysler, Acura, GM(Nova, Spectrum, Sprint), Mitsubishi, Nissan, Mazda....
Check Stock

MASTERCOOL 43013 Vacuum Type Cooling System Filler Kit

  • kit can be hooked underneath the vehicle's hood for easy access.
  • no need to undergo time-consuming air bleeding after refilling new coolant.
  • Conical adapter Offers a wide application to different radiator filler necks.
  • Minimizes the risks of engine overheating.
  • kit Includes vacuum purge and refill tool, coolant Hose, 1 universal radiator cap.
Check Stock

Drill Chicago X Drill Uk

  • Manufactured to NAS 907 Type B geometry aerospace specifications with 135 degree P3 split point is self-centering for reduced thrust and easier penetration and Heavy-duty construction for drilling in tougher materials.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Manufactured from premium high-speed steel.
Check Stock

Hose Clamp Pliers Set, 9pcs Wire Long Reach Hose Clamp Pliers Set for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps, Clamp Removal Tool by BOOTOP PIN

  • 9PCS Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps.
  • Hose Clamp Pliers For replacement of fuel, oil, and water hose.
  • Hose Clamp Tool Pliers for the removal and locking of clamps into open position..
  • Universal Hose Pliers Set Includes long-reach cabled hose clamp pliers(Flexible Hose Clamp Pliers), Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Locking Design: The 5 spring-clamp pliers are capable of locking in place to free your hands and speed up your repair work. Long reach hose clamp plier with wire flexible wire shaft convenient for working hidden areas and long distance. Perfect Fit: Having purpose-built tools will eliminate time-consuming work arounds and jerry rigging, making your hose work a breeze. This hose clamp tool box set works with plastic and metal hose clamps from 11/16 inch to 2 1/2 inches..
  • Automotive hose clamp pliers set may also know as hose clamp tool, hose clamp tool pliers,....
Check Stock

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

  • 【Fastener Remover and Hook Set】The fastener remover is designed for removing automotive audio equipment, trim panels, door panels, window trim, emblems and metal clips without damaging upholstery or the trim. The V style and U style design hooks for various fittings and hoses. Easy to percolate quench coolant, oil or any other part of the hose connection. Remove radiator hoses, transmission lines, heating lines, or any other rubber hose for installation joints in real time..
  • 【Multi Function】Work great for removing all kinds of difficult dismantling pipes, such as air pipes, power auxiliary pipes, cooling oil pipes, water pipes, etc. Also perfect for pulling o- rings & gaskets on hydraulic fittings, breaking a seal on a stuck hose, brake hoses/fuel hoses/gas lines/coolant hoses/radiator hoses, lawn mower gas lines and vacuum clamps & hydraulic piston seals, clear out a grease fitting, ect..
Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
Check Stock

Micro 100 QBT-060200 Boring Tool - Chipbreaker - Quick Change.060\ Min Bore Dia.200\ Max Bore Depth.010\ Proj, .0338\ Offset.002\ Corner Rad, 3/16\ Shank Dia, 1-1/2\ OAL, Uncoated

  • Top rake geometry provides freer cutting.
Check Stock

NA. 28pcs Universal Radiator Pressure Tester and Vacuum Type Cooling System Kit with Toolbox Storage for Car Truck Motorcycle Use

  • [ Multi-function]: Our universal radiator pressure tester kit can test the leakage in the radiator system, replace the coolant and remove air bubbles. You can use the tester to quickly and easily solve any problems related to radiator pressure, making your work easier and faster..
  • [High quality]: The universal radiator tester tool is made of high-quality aluminum alloy, rubber and nylon, with better sealing, higher strength and good toughness, providing higher stability to prolong service life, and better vacuum effect it is good..
  • [Complete specifications]: color-coded radiator test caps make it easy for you to choose the right test cap for your work without causing confusion. The 17pcs radiator test cap is suitable for testing the cooling system of most cars. It is equipped with a coolant replacement system to help you easily replace the old coolant..
  • [Easy to store and carry]: The vacuum cooling system kit uses a thick blow molding tool box to fix all items in place, protect your instrument, easy to store and easy to carry..
  • [100% SATISFACTION CUSTOMER SERVICE]: specialize in high-quality auto parts and auto supplies kits. If you encounter any problems with our products or during use, please contact us in time, and we will give you a satisfactory repl....
Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

  • 10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
  • Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for less spindle and changer maintenance..
  • Free Wrenches & Pull Studs: Three free wrenches for extra tightening and easy release if necessary. 10 free HAAS pull studs. Ideal for CNC Lathe/milling, drill press, and heavy duty hand tools..
Check Stock

MASTERCOOL 43301 27 Piece Master Radiator Pressure Test Kit

  • Detects and exposes external system leaks.
  • Detects internal engine leaks due to blown gaskets or cracked block.
  • Vacuum type cooling system, Purge and refill for quick change of coolant, Test Range: 0 - 35 psi, Includes 1 blue radiator cap test connector....
  • Includes 1 black radiator cap test connector R123/R124 Includes 1 thermometer, 1 universal radiator cap, 1 vacuum purge and refill tool, coolant hose....
  • Includes hand pump and 19 adapters (No. 's 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) to fit most popular domestic and....
Check Stock