ReviewsCooling After burn Mist

COREGEAR Brass Nozzle Tips (3) and O-Ring (1) - Fits Classic, Classic JR, Ultra Cool, Ultra Cool JR Misters

【Lengthen Plug-in & Cleanable Mist Nozzles】Sturdy metal plug-in mist nozzle easy to install and pull out and makes mist nozzle more firmly when spraying. The mist nozzle can be completely disassembled easy to clean the dirty when it is blocked by impurities.
【Easy to Diy Install】 The Humidification misting cooling Nozzles uses a no-hole design. Simplify the insertion and removal of small fittings and drippers. Cut the hose to desired length, then connect all the nozzles and hose, and finally attach it to your faucet. No special tool or skill required.
【Energy Conservation & Environmental Protection】Misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you, and be an environmentalist.
【Wide Application】Misting Cooling System widely apply for garden, Trampoline water park, landscaping, greenhouse, humidification, outdoor cooling system, deodorant air purification, Swimming pool misting fog cooling, Increasing air humidity, reducing temperature and reducing floating particles in the air, Mist mosquito system and so on.

Check Stock

YuYo Misters for Outside Patio, 26FT Misting Cooling System, Patio Misters for Cooling, Water Mister for Patio Greenhouse Garden Gazebo Poolside Umbrella Trampoline Deck Porch

【EFFECTIVE MIST COOLING】Decrease the temperature in your outdoor living areas up to 20° F, misting cooling system helps you beat the heat during this summer. Please tighten the nozzle before use to ensure the best spray effect..
【COOL YOUR OUTDOOR LIVING AREAS】Water misters system for cooling outdoor can be attached to your patio, poolside, backyard, animal enclosure, or other outdoor areas, allowing you to enjoy cooling and fun everywhere..
【PRE-ASSEMBLED MISTER SYSTEM】Misters for outside patio fun is easy assembly, no special tools are required. Attach the preassembled misting line with the included zip ties or clips, and then connect to a standard garden hose to immediately experience the benefit of mist cooling..
【PREMIUM QUALITY】With UV-resistant flexible tubing, premium quality brass misting nozzles, the patio misting system will provide a long-lasting, worry-free performance..
【WIDE APPLICATION】Contains 26 feet of mist line and 9 misting nozzles, the outdoor water misters system create 26-feet of mist cooling coverage. Ideal for patio cooling, gazebo, pool areas, and play area cooling applications..

Check Stock

EONBON Mist Cooling System, 40 Feet (12M) Portable 1/4" Outdoor Garden Patio Misting Cooling System Cool Mister System for Lawn Greenhouse Backyards Pool

MATERIAL: Use of well-made brass atomizing nozzles and the pipe is made of a material with excellent UV protection. No power required, work with the pressure of faucet. Can work under normal pressure (2-3kg) and Max working pressure is 30 BAR (450 PSI)..
PACKAGE INCLUDES: 40 Feet misting line with 16 nozzle seats.
FEATURE: Easy to install, water saving, durable for using and have a good performance on cooling or other system, can be DIY. Fine fog mist, cool your summer heat immediately..
COOLING EFFECT IS OBVIOUS: Our mist cooling system has outstanding cooling effect. The misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, and delivers very fine mist to significantly cool the air in the hottest summer weather. There is also excellent performance in agricultural irrigation..
WHERe CAN I USE IT: Misting Cooling System widely apply for any place you want like garden, landscaping, greenhouse, humidification, outdoor cooling system, epidemic prevention, spraying disinfectant, deodorant air purification, swimming pool misting fog cooling, mist mosquito system and so on..

Check Stock

YuYo Misting Cooling System, 49FT Misting Line +16 Brass Mist Nozzles + 3/4\ Brass Adapter Outdoor Mister for Patio Greenhouse Garden Gazebo Poolside Umbrella Trampoline

【IDEAL MISTER FOR OUTSIDE PATIO】Inclouding 59 feet of mist line and 19 misting nozzles, the outdoor water mister system create 59-feet of mist cooling coverage. Ideal for patio cooling, gazebo, pool areas, and play area cooling applications. The trampoline water misters are the perfect gift for kids, family, and friends. Please tighten the nozzle before use to ensure the best spray effect..
【PREMIUM QUALITY】With UV-resistant flexible tubing, premium quality brass misting nozzles, the patio misting system will provide a long-lasting, worry-free performance..
【EFFECTIVE MIST COOLING】Decrease the temperature in your outdoor living areas up to 20℃ or 68℉, misting cooling system helps you beat the heat during this summer..
【PRE-ASSEMBLED MISTER SYSTEM】Misters for outside patio is easy assembly, no special tools are required. Attach the preassembled misting line with the included zip ties or clips, and then connect to a standard garden hose to immediately experience the benefit of mist cooling..
【COOL YOUR OUTDOOR LIVING AREAS】Water misters system for cooling outdoor can be attached to your patio, poolside, backyard, animal enclosure, or other outdoor areas, allowing you to enjoy cooling and fun everywhere..

Check Stock

Aimego Outdoor Misting Cooling System, Outdoor Misters for Outside Patio - Water Misters for Cooling Porch Garden Yard Trampoline Backyard

Enjoy Your Cool Summer: Aimego misting system can cool the air temperatures up to 20℃ or 68℉.The fantastic outdoor cooling system provides a natural water cooling area, release you from hot summer. Make you and your family have a good summer..
Easy DIY Install Outdoor Misters: Aimego sprinkler is very easy for installation, you can connect it to water faucet without tools, even children or seniors can make it. Providing all the accessories you need for a air cooling and plant misting system,only need 10 minutes to installs. Connect with the faucet, then turn on the tap, and enjoy the misting..
Misting Instead of Watering: enjoy cool misting, rather than heavy water. After repeated tests, we found that 0.9m is the most suitable spacing. 0.9m not only ensures continuous mist production, but also avoids too much water. Besides, the distance between tap and first mister is 2.1M, which provide enough length for you to connect with faucet. This distance is also based on our repeated tests..
Durable and Leak-proof: Updated mist nozzles are made of brass, leak-proof. Connectors are self-sealing Tee Joint. High quality flexible tubing is treated by UV, resistant to yellowing hydrolysis and microbial degradation, and meanwhile anti UV up to 3.5 or more. All o....

Check Stock

Misting Nozzles Kit Include Water Misting Nozzle Tees Thread 1/4 Inch and Brass Orifice Nozzle with Black Plug for Outdoor Spray Cooling System (72 Pieces in Total)

Sufficient quantity: we provide you with 30 pieces water misting nozzle tees, 36 pieces brass nozzles and 6 pieces black plugs, sufficient quantity is enough for daily use and replacement, nice accessories can be replaced at will, bringing more convenience.
Product dimension: each tees thread can be connected by many kinds tube which is 1/4 inch.
The nozzle orifice diameter is 0.01 inch, the operation pressure is 2-70 kg/ cm, the sprayed water mist is uniform and fine, energy-saving and water-saving, without electricity.
Durable quality: our spray cooling device made of quality material, the misting nozzle tee connector is made of POM material, sturdy and long-lasting, the misting nozzles is made of brass material, not easy to rust and corrode.
Simple operation: these water misting cooling nozzle set are easy to install, just connect suitable water pipes to both ends and screw on the nozzles, water mist can be produced after turning on the water source.
Effective for cooling: these brass misting nozzle tees kit are suitable for use in summer, it can effectively reduce the outdoor temperature.
The sprayed fine water mist can reduce the temperature by 20 degrees, it is the nice accessory for outdoor occasions.

Check Stock

Misting Nozzles Kit Include Water Misting Nozzle Tees Thread 1/4 Inch and Brass Orifice Nozzle with Black Plug for Outdoor Spray Cooling System (48 Pieces in Total)

Sufficient quantity: we provide you with 20 pieces water misting nozzle tees, 24 pieces brass nozzles and 4 pieces black plugs, sufficient quantity is enough for daily use and replacement, nice accessories can be replaced at will, bringing more convenience.
Product dimension: each tees thread can be connected by many kinds tube which is 1/4 inch.
The nozzle orifice diameter is 0.01 inch, the operation pressure is 2-70 kg/ cm, the sprayed water mist is uniform and fine, energy-saving and water-saving, without electricity.
Durable quality: our spray cooling device made of quality material, the misting nozzle tee connector is made of POM material, sturdy and long-lasting, the misting nozzles is made of brass material, not easy to rust and corrode.
Simple operation: these water misting cooling nozzle set are easy to install, just connect suitable water pipes to both ends and screw on the nozzles, water mist can be produced after turning on the water source.
Effective for cooling: these brass misting nozzle tees kit are suitable for use in summer, it can effectively reduce the outdoor temperature.
The sprayed fine water mist can reduce the temperature by 20 degrees, it is the nice accessory for outdoor occasions.

Check Stock

Meikelion Outdoor Misting Fan Kit Mist Cooling System Fan Kit for a Cool Patio Breeze 23FT (7M) Misting Line + 5 Copper Metal Mist Nozzles + a Copper Metal Connector(3/4'') Fit to Any Outdoor Fan

PERFECT MISTING COOLING: : Turn any fan in to air chilling misting fan with use of our Fan Mist Kit! During hot summer months, most fans tend to blow hot air which adds to the misery. Simply attach our fan mist ring on the front grill of your existing fan cools the surrounding air temperatures up to 20 degrees.Perfect if you are hanging out by the pool, on the patio, or anywhere around your home..
MULTIPURPOSE: Simply tie misting system to your fan with the Cable ties provided. Spin the high quality Copper Metal Mist Nozzles on to Misty Mist ring and then attach your garden hose to our hose connector! The range is wide. Just determine how much power and range you need, for “spot cooling” to suit your purposes. Water is circulated from your hose, and a fan pushes the mist through, producing a cool breeze!.
HIGH QUALITY : Outdoor Mist Cooling System Fan Kit use of precision brass misting nozzle ,made with high quality PU tubing, resistant to UV , long lasting.US standard threaded joints + universal joints, adapt to various taps and the tight interface effectively prevent water leakage..
ENERGY CONSERVATION: Misting fan cooling system energy conservation and environmental protection, Misting fan cooling system directly use tap water to spray and c....

Check Stock

Hylaea Patio Mist System, Misting Cooling System, 60 Feet Misting Line Outdoor Fan, 1/4'' Mist Kit for Patio, Lawn, Garden, Home Irrigation

Easy to Install – Our products have been assembled and installed in a few minutes after choosing the right place. If special needs arise, we can continue DIY..
Affixed with saddle clamps or cable ties.
Mist System(60Feet) – 3M mist hose+15M 1/4inch assembled misting kits line with 26 nozzle seats.
Environmental protection and energy saving – The material of this product is food grade material；No power required, work with the pressure of facuet.
All quick pushing connectors, easy for DIY.
Fine fog mist, cool your summer heat immediately.
Usage – Outdoor cooling system, Garden, Swimming pool misting fog cooling, greenhouse,deodorant air purification, landscaping, Trampoline water park, humidification, epidemic prevention, spraying disinfectant.
High Technology – Our patio misting systems Can work under normal pressure(2-3kg).
Max. Working Pressure: 30 BAR (450 PSI) to expand your usable space and bring wonderful relief from the heat outdoors.

Check Stock

Fan Misting Kit for Cool Patio Breeze 19.36FT Misting Line with 5 Removable Brass Nozzle and Plated Solid Brass Adapter, Connects to Many Fans, Auto Misting Spray System for Summer Cooling

【Fan misters for cooling outdoor】The fantastic outdoor cooling system provides a natural water cooling area,release you from the indoor bad air conditions and enjoy the fantastic outdoor sight in hot summer, cools the surrounding air temperatures up to 20℃ or 68℉..
【Tap connector with filter screen and more durable tube】The filter screen removes dust, sediment, and debris, reducing the possibility of nozzle clogging and extending the service life. We have also upgraded the tube's material. The PE engineering material looks like glass fiber, and its compression resistance and durability are better than ordinary PE materials! The service life of the tube is twice that of others tubes..
【Detachable nozzle&Premium Product Quality】: Threaded mist nozzle, easy to install and pull out. The mist nozzle can be completely disassembled, easy to clean the dirt. The mist nozzle is made from removable brass material, a Solid brass hose/faucet connecting adapter, no blocking, no rusting and can be used for a long time..
【Cooling the Heat】: Misting cooling and turning down the heat， Installing a fan spray the fan， which absorbs the heat from the outdoor surrounding, and provides a cooling outdoor area. Delivers very fine mist to significantly co....

Check Stock

Cairondin Patio Misters for Cooling Outdoor, 26FT DIY Misting System for Outside Umbrella Garden Backyard Trampoline, 7 Metal Mist Nozzles, a 3/4\ Brass Adapter

【Wide Use】The mister system not only cooling the air, but also watering the plants. The mister system widely apply for patio backyard garden canopy pool umbrella deck trampoline awning porch gazebo fence chicken coop pergola greenhouse animal cage, etc.
【Premium Product Quality】Precision 3/4" brass adapter, sunlight resistant 1/4" flexible PU tubing, stainless steel mist nozzle, leak-proof connector, silicone filter mat, all parts are carefully made with premium materials, ensure that the entire misting system will not leak, not rust, not block, and have a longer life.
【Plug-in Mist Nozzle】Stainless steel plug-in mist nozzle, easy to install and pull out. The mist nozzle can be completely disassembled, easy to clean the dirt. When the mist nozzle is blocked by impurities and can’t be sprayed, you can easily solve it.
【Snap-on Connector】The connector has a snap-on design, and the mist tubing, mist nozzle and connector can be tightly connected, will not leak. Each connector is precisely manufactured, has good sealing, and will not leak due to excessive water pressure.
【Energy Saving and Clean Air】The misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money....

Check Stock