ReviewsCopper Alloy Pumps

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
Sil-flo is not recommended for ferrous metals such as iron or steel.

Size: 0.98inch/2.5cm diameter x 11.81inch/30cm long..
Highly Machinable: High-quality acetal copolymer rod, an engineering thermoplastic polymer with good strength and stiffness, which is easily processed using machine and yields products of even sizes. Resistant to high temperatures make it won't become gummy during the machining process..
Chemical-Resistant: Among different types of acetals, acetal copolymer is highly resistant to various chemicals (highly alkaline-resistant),heat,and water and it doesn't easily deteriorate or wear in wet environments..
Wide Application: 1 inch acetal rod can act as lubricated parts, decorated parts, precision instruments, bearings gears, pumps, and insulated shells replacing of bronze, copper alloy, zinc, aluminum, steel and other metals..
What You Get: You will receive 4 pieces opaque black acetal copolymer round rod, sufficient quantity to meet your different needs..

【Accurately measured value】-----Precision measurement circuit to ensure Indication error ± 0.5% (HLD = 800), showing the value of repeatability 0.8%.
【Leeb hardness measurement】-----Based Leeb hardness measuring principle, can detect a variety of metal materials.
【Supports a variety of standard hardness】-----Real-time display and conversion: Brinell HB, Rockwell HRC, Vickers HV, Shaw HS, and three kinds of intensity values.
【Applicable Materials】-----Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper(bronze).
【Application】-----1)Bearings and other parts.
2)Failure analysis of pressure vessel, steam turbine generator group and equipment.
4)Mechanical or permanent assembly installed.
6)The original record of formal requirements on test results.

Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.

Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.

Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.

Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.

Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.

Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.

Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.

Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.