Tram 240-B CB 5 Magnet Mount Antenna Steel Housing with Rubber Boot 17ft Coaxial Cable Black
- 17ft low-loss RG-58 A/U coax cable: tinned copper braid 95%, solid insulation, stranded tinned copper center conductor.
ReviewsCopper Braid
MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool
- ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
- ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
- ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
- ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old....
Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
- ...ful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
- 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
- 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
- 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small a....
Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool
- ...dering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
- Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
- 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
- ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
- 【Widely used Solder Remover】:The Desoldering Wick & Desoldering Pump can be used to correct mistakes with....
TISINO 3.5mm to Dual XLR Stereo Cable 1/8 inch Mini Jack to 2 XLR Male Y Splitter Adapter Cord- 10 FT
- ...e (2 rings and a tip) connector, This won't work on an iPhone or Android phone which has 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipmant is "OFF" when changing connections..
- XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity.
- Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss..
- Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response.DescriptionTISINO 10 FT Gold Plated 1/8" TRS Stereo to Dual XLR male Y-Splitter Cable.
- This cable is designed to connect an audio device with a mini stereo phone output to professional audio gear with XLR inputs. It is ideal for connecting a portable media player, laptop, or similar device to a mixing console..
- - High Grade Oxygen Free Copper (OFC) for effective EMI and RFI rejection and flexibility..
- - Durable and flexible PVC outer sleeve..
- - Inside aluminum foil shielding layer to reduce interference, for a better fidelity effect..
DISINO Dual Female XLR to Dual RCA Cable, Heavy Duty 2-XLR Female to 2 RCA/Phone Plug Male HiFi Stereo Audio Connection Microphone Cable Interconnect Lead Wire - 10 Feet /3 Meters
- Multipurpose：Dual XLR Female to Dual RCA Male cables, 2 XLR Female Connectors on one end, 2 RCA Male Connectors on the other end. Dual Cable are stuck together to run parallel, easy to organize, it's also can be split into two so that you have two separate RCA to XLR cables..
- Excellent Sound:4N Oxygen Free Copper with metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance, great choice for music lover, It's especially great for studio or live performances..
- Professional Quality:24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, the copper shell blocks any interference which ensures minimum signal loss transfer.
- The right size, they always fit correctly, never too tight or too loose..
- Incredible Durability:Heavy Duty Flexible PVC Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch),The thick copper braid is highly elastic,high durability. made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable..
50' of Low Loss Double Shield Coax Cable, RG213U Type, Non-contaminating, with PL259. 213-50
- Bare copper braid + foil Double Shielded!.
- High Quality Low Loss 50 Ohm Heavy Duty Coaxial Cable..
- Solid insulation, Stranded bare copper center conductor. Factory Installed PL-259 Connectors on Each End..
- Great for 2 Way, CB and Ham Radio Antenna Hookups..
VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
TOWOT Solder Wick Braid with Flux No-Clean Electronic Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10 L 5
- Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
- And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
- Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.
Herain No-Clean Solder Wick Desoldering Braided Wicks with Flux Desoldering Wicks Removal Tool Solder Sucker Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
- 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption..
- 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board..
- 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder..
- 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station..
- 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..
Wilson Electronics 500 ft Black Spool Wilson400 Ultra Low Loss Coax Cable
- Type: Low-loss RF Coax RG58 A/U Cable | Length: 50 feet.
- Material: Inner conductor: Tinned copper | Insulation: PE | Outer conductor: Tinned Copper Braid | Jacket: PVC.
- Diameter(mm): Inner conductor: 19*0.18 | Insulation: 2.95 | Outer conductor: 3.50 | Jacket: 4.95.
- Impedance: 50 ohm | Max Frequency: 1000MHz | Capacitance Conductor to Shield(pF/m): 101.05.
- We are a professional radio frequency coaxial cable company, the cables are of high quality, you can buy our products with great confidence..