ReviewsCopper Brazing Rod

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

Amprobe TH-3 Relative Humidity Temperature Meter 2 Display

  • Air/Acetylene Soft Flame Kit has always been the Old Reliable flame tool for plumbers.
  • Produces a precise 2700 Degrees Fahrenheit target heat for soldering and brazing copper tubing.
  • Capable of soldering up to 1/2 inch and brazing up to 3/8 inch copper tubing with supplied tip.
  • Torch Handle with rear control valve for accurate gas control and positive shutoff.
  • Acetylene Regulator for MC Tank with protective rubber gauge boot.
Check Stock

K-T Industries 2-2750 Brazing Flux, 0.5 lb

  • Price For: Each Tensile Strength (PSI): - Type: - Contents: 56% Silver, 22% Copper, 17% Zinc, 5% Tin Container: - Application: For Ferrous and Non Ferrous Alloys Good for Stainless Steel Includes: 1 oz Brazing Wire and 1.75 oz White Flux Item: Brazing Kit Material: Safety-Silv-56 Dia. (In.): 1/16 Length (In.): - Brazing Range (F): 1145 to 1205 Standards: AWS A5.8, Bag-7, NSF 51.
  • Country of Origin (subject to change): United States.
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
  • galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.
Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

  • MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock

Uniweld KC100P Centurion Weld Braze Outfit with 511 Plastic Carrying Stand brass copper blue

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Centurion series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

Hot Max 22070 1/8-Inch by 18-Inch Flux Coated Brazing Rod

  • Excellent quality, easy flowing, low fuming brazing rod for nearly all your brazing needs.
  • 65,000 PSI tensile strength Melting Point: 1,600-Degree F (871-Degree C).
Check Stock

RTMMFG Brass Brazing Torch Cutting Torch Jewelry Repairing Torch Dual Fuel by Oxygen and MAPP PRO/Propane Spark Lighter

  • Flame control valve makes it easy to ignite/extinguish the flame and adjust the size of the flame..
  • 360° rotation of torch tube is capable for various using environment. Temperature can reach 3000℃..
  • For silver soldering copper pipes, loosening rusted nuts/bolts/screws, brazing copper/mild steel/aluminum..
  • The propane brazing torch with hose can provide greater freedom of movement and great work safety..
  • Suited for 14.1-16oz cylinder, connection of CGA600 (1"-20UNEF)..
Check Stock