ReviewsCopper Connected

2pcs 12V Automotive Top Post Car 3 Way Battery Wire Cable Terminals Clamp Connectors Kit Positive and Negative Set Red & Black

【Dimension】Size: Appro2.16X1.37X1.77 inch (As the picture show) ..
【Sturdy & Durable】Our quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss.Positive Negative Battery Terminal Material: Pure Copper + Plastic..
【Easy to use】Our products——the battery post terminals Connectors Copper Color: Red(+) & Black(-).Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
【Wide application】These battery terminal connectors can be used for most 6/12V Cars, Vans, Caravan, Motorhomes, boat, Truck Batteries etc. Just make sure to connect the correct terminal for the correct polarity..
【You will get】2Pcs pure copper battery terminals connectors.I believe our product can fully meet your requirements. If you have any questions, please feel free to come to us, we will provide high-quality guarantee and friendly customer service..

Check Stock

Auto 4 Port Underdash Compact Heater Kit 13X Copper Tube+Speed Switch Set for Truck Universal Trucks Minivans Excavators Harvesters Tricycles

♥【Specification】①Optional Voltage: 12V.②Power supply: 12V / 8A.③Material: Copper, Iron.④Weight: about 3KG. ⑤Size: 23 x 21 x 10cm/9.3" x 8.5" x 3.9". ⑥Fitting required - 5/8'' (16mm) inner diameter water hose..
♥【Feature】①Comes with mounting brackets and control switch.②Very easy to install , only need to hook this heater up to water tank and supply power , then works..
♥【Package】Included: ①1pcs x heater. ②4pcs x Black tubes. ③2pcs x Tee. ④2pcs x mounting brackets.⑤1pcs x switch.⑥2pcs x straight fittings. ⑦8pcs x 16-25cm hose clamps..
♥【Instructions】①The red line is connected with a power supply's positive pole and motor's positive pole.②The blue one is connected with the motor's negative pole.③The black line is connected with a power supply's negative pole..
♥【Using】①Applicable models: trucks, minivans, excavators, harvesters, tricycles and so on..

Check Stock

PATIOSIR Patio Gas Heater Dump Switch, Outdoor Heater Replacement Parts Thermocoupler &Tilt Switch, Garden Heater Igniter Repair Parts

☆The head of thermocouple is fixed thread, need to be compared that it is suitable for your heater before purchasing the product..
☆Made of high-standard brass and red copper,and ABS materials, during operation, you need to hold the valve for 5-10 seconds and then thermocouple will start work..
☆Suitable for Propane gas heaters with Thermoelectric Safety, such as room gas heater, outdoor patio heater and other Thermoelectric gas products..
☆The thermocouple is easy to install. The probe is connected to the ignition device, the thermocouple is connected to the valve, and the other two ports are connected to the safety dumping switch, which does not require special tools and is prefect compatible for the original part..
☆The safety tipping switch will automatically stop the heater when the heater is tilted or dropped, which can prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure. Suitable for weak dump switches with gas R ≤ 10mΩ..

Check Stock

Greenworks 40V 300W Cordless Power Inverter IV40A00

Better security: The adapter(1pcs included) is equipped with a fuse and high-quality silicone copper wire to prevent excessive transient current from....
Perfectly compatible : work with for Ryobi 18V P108 P107 P102 P100 Li-ion & Ni-Cd Battery . Easy to install ,locks on you battery very well..
Easy to DIY operate:The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power....
Multi-scene use: Power wheels adapter has 12.5 inches of 14 gauge wire installed.
You can use it to upgrade your power wheels, Rc toys, Robotics DIY....
Tips: The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the....

Check Stock

Radar Detector Cable, USB to RJ11 Plug Cable,for Escort Valentine One Uniden Beltronics Cobra Whistler Radar Detector,Replacement Power Cable for Radar Detectors (RJ11-3.3ft)

✅【The Latest Patented Technology】After experimental comparison, the ordinary USB cable is incompatible with the working voltage of most radar detectors, which causes the radar detectors cannot be started.To solve this problem,our department has developed a radar detector cable with two working voltages at the same time. You can switch the USB socket at will without affecting the use of the radar detector..
✅【Stable Working Performance】The radar detector cable adopts a new chip encryption technology to ensure that the radar detector can be stably turned on when the cable is connected to 5V or 12V USB interfaces,giving you all around protection wherever your adventures take you..
✅【High Quality Copper Material】Industrial grade high quality copper conductor is used, which is closely connected with the conductor to improve the transmission quality and avoid external interference. High elastic PVC adhesive layer, avoid winding, not easy to damage..
✅【Compatible】It can power radar detectors with phone type jacks. Compatible with Uniden, Escort, Beltronics, Valentine one and other Telephone Plug RJ11 radar detectors..
✅【Multiple Choice】We have charging cables of various lengths, 6.56ft: B0BLTSC26Z, 9.84ft: B0BLTSS9C2.

Check Stock

Radar Detector Cable, USB to RJ11 Plug Cable,for Escort Valentine One Uniden Beltronics Cobra Whistler Radar Detector,Replacement Power Cable for Radar Detectors.(RJ11-6.56ft)

✅【The Latest Patented Technology】After experimental comparison, the ordinary USB cable is incompatible with the working voltage of most radar detectors, which causes the radar detectors cannot be started.To solve this problem,our department has developed a radar detector cable with two working voltages at the same time. You can switch the USB socket at will without affecting the use of the radar detector..
✅【Stable Working Performance】The radar detector cable adopts a new chip encryption technology to ensure that the radar detector can be stably turned on when the cable is connected to 5V or 12V USB interfaces,giving you all around protection wherever your adventures take you..
✅【High Quality Copper Material】Industrial grade high quality copper conductor is used, which is closely connected with the conductor to improve the transmission quality and avoid external interference. High elastic PVC adhesive layer, avoid winding, not easy to damage..
✅【Compatible】It can power radar detectors with phone type jacks. Compatible with Uniden, Escort, Beltronics, Radenso XP etc and other Telephone Plug RJ11 radar detectors..
✅【Multiple Choice】We have charging cables of various lengths, 3.3ft :B0BLTQK74Y .9.84ft B0BLTSS9C2..

Check Stock

Gavemi Fan Splitter, PWM 4 Pin PC Case Fan Splitter Adapter Cable Compatible 3 Pin Fan, 12.6 inches

Fan splitter cable is compatible with all brands of 4-pin PWM fans and 3-pin fans..
It is possible to run three chassis fans at the same time on a single PWM fan header and control the speed..
4 pin fan splitter is a black cable sleeve to make the inside of the case more concise..
ength 12.6 inches, 24 AWG pure copper conductor. Pack of two case fan splitter cables..
PC fan splitter has a 4-pin male fan connector connected to the motherboard, and the fan header splitter at the other end has three 4-pin female connectors connected to the PWM case fans..

Check Stock

Lamp Cord has Button Switch UL304 2A/120V,Plug,Stripped Ends Ready for Wiring 18 AWG SPT-2, White (12FT)

Power Cord with On/Off Inline Button Switch,Clicky On/Off switch, which can control electrical appliances..
Internal for The Copper Core, Wire: SPT-2 18AWG the External PVC Plastic, Good insulation effect and durable for ensuring your safe use.
Product specification: Full length 12 feet, Switch and Plug is 3 feet.
Switch Rated Power: UL E349147 2A/120V AC 2A/250V AC.
How to distinguish the neutral wire of the power cord：Method 1: The big pin plug is connected to the neutral wire.
Method 2: Ribbed edges are connected to the neutral wire..

Check Stock

DISINO 1/4 Inch TRS to XLR Male Balanced Signal Interconnect Cable Quarter inch to XLR Patch Cable - 3.3 Feet

This Balanced XLR Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..

Check Stock

NEWTRY Electric Centrifuge Machine Desktop Lab Benchtop Centrifuges with Timer and Speed Control 4000rpm Capacity 20ml×6 800D 110V US Plug, 60HZ

★[EFFICIENT MOTOR] The motor components have a high degree of tightness, the motors run stably, have zero error design, and are efficient and stable..
★[100%PURE COPPER COIL] Pure copper wire is fixed on the stator by winding, and the magnetic field is fixed during the stroke. The higher the copper content, the stronger the magnetic force, the stronger the rotor power, the higher the rotation speed, and the greater the centrifugal force..
★[RUNNING SMOOTHLY] The motor and the base plate are connected by a damping column. With integrated circuit, the motor rotor runs smoothly, which can avoid motor vibration and is firm and stable..
★[HIGH STRENGTH PLASTIC, SIMPLE STRUCTURE] [High strength plastic, simple structure]: The machine shell is made of high-strength plastic. Its structure is quite simple and easy to operate..
★[LOW NOISE,MUTE] A round centrifugal head with a top cover reduces noise..

Check Stock

6 Pieces 4 Pin RGB Extension Cable LED Strip Connector Cord Wire Solderless Strip Jumper Cables Kit with 12 Pieces Pin Connector for 5050 3528 RGB LED Strip Light (Black, 1.6 FT, 3.3 FT, 6.6 FT)

What you get: the package includes 6 pieces of 4 pin RGB extension cable LED strip connectors and 12 pieces 4 male pin plugs for 10 mm 5050/ 3528 RGB waterproof and non-waterproof LED strip light.
3 Different sizes: the length of the LED strip connector cable is 50 cm/ 1.6 ft, 1 m/ 3.3 ft, 2 m/ 6.6 ft, which can meet different DIY needs.
2 Major functions: the RGB extension cable can be connected to IR/RF controller and 5050/ 3528 LED strip to extend the strip to reach an nice position.
Or it can be connected between 2 RGB LED strips, which is convenient and practical.
Easy to install: with 2 pre-welded female connectors and 12 pieces 4-pin male plugs (copper plated), the installation of these light strip extension cords do not need to be soldered and without tools, saving time.
Quality material: the insulation of the LED light strip extension cord is made of PVC material, which is corrosion-resistant.
The wire contains 4 strands of tin-plated pure copper wire, which is oxidation-resistant, flexible and durable.

Check Stock