ReviewsCopper Lag Screws

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance(as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

ENO, Eagles Nest Outfitters Deluxe Hammock Hanging Kit, Take Your Hammock Inside, Charcoal

  • Bring the outdoors in: When you have the hammock itch, but the weather is crummy, create your own relaxation station inside with the Deluxe Hammock Hanging Kit.
  • Master the art of lounging: Simply install the 2 anchor bolt hangers with the lag screws and washers to the wall studs.
  • Clip your hammock (not included) to the hangers and let the relaxing begin.
  • Trustworthy material: Falling is not an option, unless it's to sleep.
  • The Indoor Hanging Kit features sturdy 6061 anodized aluminum hardware and is designed to support up to 250 pounds.
  • The full hanging experience: Every kit includes 2 anchor bolt hangers, 2 lag screws, 2 washers, 4 bolts and a detailed installation guide.
  • ENO gives back: ENO loves the outdoors and shows it by donating to organizations that preserve our wild places.
Check Stock

#14 x 4\ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count

  • Manufactured from High Quality Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible.
  • Corrosion Resistant Exterior Coated Screws Passed 1200 Hour Salt Spray Test Without Coating Failures.
  • .24 (#14) Thread Diameter, .508 Head Diameter Modified Truss Head Screw for Better Compression Force.
  • These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces.
  • Excellent Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam.
Check Stock

Leviton 1451-2IM 15 Amp, 120 Volt, Toggle Framed Single-Pole Ac Quiet Switch, Residential Grade, Grounding, 10-Pack, Ivory

  • Faster installation with combination of side wiring and quick wire push in wiring.
  • Terminal screws accept up to No.12 AWG copper or copper clad wire.
  • Quickwire push in terminals accept No.14 AWG solid copper wire only.
  • Large triple combination screws Robertson/Phillips/Slotted for fast wiring.
  • Impact resistant, durable thermoplastic toggle and frame.
  • Faster installation with combination of side wiring and Quickwire push-in wiring^Terminal screws accept up to No. 12 AWG copper or copper-clad wire^Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Large triple combination screws Robertson/Phillips/Slotted for fast wiring^Impact-resistant, durable thermoplastic toggle and frame.
Check Stock

Copper Ridge Outdoors Platform Brackets - (Set of 4) - Elevated Platform Mounts, Powder Coated 11 Gauge Heavy Duty Steel, 4x4 Channels, Elevated Platform for Hunting Blind, Deer Stand Bracket 4x4

  • HEAVY DUTY: 11 gauge powder coated steel brackets provide strength to create your deer hunting blinds elevated platforms..
  • LARGE CHANNELS: Channels designed for 4 x 4 wooden posts horizontally and vertically, 3 5/8 inch internal channel width, allowing you to customize your elevated blind platform to any size using your own lumber..
  • SECURITY MINDED: Elevated Platform Brackets mounts are pre-drilled for lag screws to secure the lumber to the mounting 4x4 corner brackets..
  • EXTREME STABILITY: 7 degree outward angled legs provide a solid base to build your elevated deer blind platform upon..
  • Copper Ridge Outdoors Elevated Platform Mounts (Set of 4) weighs 34 lbs..
Check Stock

Leviton 1451-2TM 15 Amp, 120 Volt, Toggle Framed Single-Pole Ac Quiet Switch, Residential Grade, Grounding, 10-Pack, Light Almond

  • Faster installation with combination of Side wiring and quickwire push-in wiring.
  • Terminal screws accept up to no. 12 awg Copper or copper-clad wire.
  • Quickwire push-in terminals accept no. 14 awg solid Copper wire only.
  • Large triple combination screws robertson/Phillips/slotted for fast wiring.
  • Impact-resistant, durable thermoplastic Toggle and Frame.
  • Faster installation with combination of side wiring and Quickwire push-in wiring^Terminal screws accept up to No. 12 AWG copper or copper-clad wire^Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Large triple combination screws Robertson/Phillips/Slotted for fast wiring^Impact-resistant, durable thermoplastic toggle and frame.
Check Stock

Muzata 2Pack 90° Swivel Deck Hinge for Boat Bimini Top T316 Marine Grade Stainless Steel with Quick Release Pin and Screws BH05, Series BH1

  • Marine grade Stainless steel - Made of high quality 316 stainless steel, suitable for rough weather at sea, waterproof, rust-resistant, and sturdy. (ATTENTION: The bimini top cap and ss pipe in main picture are not included, only for introduction.).
  • Easy to install - Come with quick release pin and lag screws, super fast & convenient installation..
  • Multi-angle - Two axes 180 degrees adjustable range, you can adjust the installation spacing to control the height of your bimini top. Meet various installation requirements..
  • Applications - For the bimini building of boats, kayaks, and yachts. Often use with bimini caps, please search ‘muzata BH16’for 7/8”(22mm) bimini caps, ‘muzata BH18’ for 1”(25mm) bimini caps..
  • Items included - Swivel hinges ×2, lag screws ×5.
Check Stock

ECKJ Hex Lag Bolts 112PCS M6 Hex Head Lag Screws Washers Assortment Kit Fully Thread Heavy Duty Hexagon Wood Screw Zinc Plated Black Metric Length Include 16/20/25/30/35/40/45/50/60mm

  • 【112PCS of 9 Sizes】 Hex head diameter is 10mm, thread diameter is 6mm, 9 sizes of screw length are 16mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm. Flat washer outer diameter is 12mm..
  • 【Quality Material】 Black lag screws are made of high quality carbon steel, high hardness and with beautiful appearance, zinc plated is smooth and anti-rust..
  • 【Lag Screw with Washer】 these bolt screws feature deep wood screw coarse threads for superior holding. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Wide Application】These metal wood screws are great for exterior household and industrial applications such as pergolas, garden beds, mailboxes, deck building, joining lumber or any DIY projects..
  • 【Note】 This item contains small and sharp parts, please keep it away from kids. We guarantee 100% satisfied after-sales service! If you had a problem, please let us know before leaving a review..
Check Stock

ROHN WM24D Double Wall Mount with 24' Stand Off - Masts 7/8' to 2-3/4' OD

  • HEAVY DUTY DOUBLE 'Y' STYLE BRACKETS. 2 BRACKETS INCLUDED AS SHOWN..
  • GALVANIZED STEEL WALL MOUNT PROVIDES 24" CLEARANCE TO THE WALL..
  • MASTS ARE HELD IN PLACE WITH 2 UNIQUE 'ANTI-TWIST' LOCKING SCREWS.
  • CLAMP ACCEPTS 7/8" TO 2-3/4" OD MAST TUBES..
  • CAN BE USED ON MASONRY, WOOD, METAL, OR OTHER TYPES OF WALLS USING UP TO 1/4" LAG SCREWS OR BOLTS (NOT INCLUDED).
Check Stock

Ribbed Plastic Conical Anchors and Screws - for Concrete, Stucco, Brick, Drywall, and Similar - Kit of 50 Screws, and 50 Anchors

  • Includes - Kit Features 50 Plastic Anchors (#10-12 x 1") and 50 Screws (#10 x 1-1/4").
  • Function - This plastic anchor and screw set comes in handy for big and small mounting jobs, while providing a supportive role in DIY and professional anchoring Applications.
  • Versatile - Ribbed plastic drywall anchor can be used in wood, brick (masonry), concrete, stucco, sheet metal and/or with lag screws in hollow wall installations.
  • Durable - Anchors are constructed from high quality plastic, Screws are rust and corrosion resistant for long term usage.
  • Quality Assurance - Includes a US manufacturers warranty.
Check Stock

Starborn Structural XF23CT400 F23 Deck Ledger/Multipurpose Flat Head Wood Screw - Black - 50 Count - 0.23 x 4

  • Exterior grade code compliant wood screws.
  • Low profile flat head design minimizes interference with connectors and finish materials.
  • Tri-Forge Point provides a fast start, minimal splitting, and reduced driving torque.
Check Stock