ReviewsCopper Lugs

Ludwig Copper Phonic Hammered Snare Drum 14 x 6.5 in. Copper Finish with Imperial Lugs

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Extras Case or Bag: Not Applicable Stand: Not Applicable Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other 003cbr.
  • Copper Finish with Imperial Lugs "With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2mm hammered shell and produces warm tone, powerful attack and dry overtones.
Check Stock

Exell Battery 4 Gauge Interconnecting Copper Cable, 6-Inch Length with 5/16-Inch Lugs (Black)

  • HIGH-QUALITY CABLE: This fine-stranded cable has a voltage of 600V and is rated for MTW/THW/AWM. It is also sunlight resistant, can be buried underground, and can handle temperatures up to 105°C (221°F)..
  • ZINC-PLATED COPPER LUGS: The copper lugs on either side of the cable measure 3/8" and have an extremely low coefficient of thermal expansion, which can help lower the risk of fire hazards during connection..
  • MULTIPURPOSE HOOKUPS: This durable connection cable can be used to connect battery banks or cells for products like backup grids, RV hookups, golf carts, emergency systems, solar-powered devices, and much more..
  • HIGH-QUALITY PLASTIC COATING: The cables' outside coating is double crimped to insulate the copper lugs and compression terminals. When heated, the tubing shrinks, which can protect the wires against corrosion and moisture..
  • FLEXIBLE DESIGN: If you lack the room to stretch out the cable between two connections, this cable is flexible enough to accommodate the amount of space you need without causing much wear on the cable's wires or its outer shell..
Check Stock

TKDMR 160Pcs Copper Wire Lugs AWG2 4 6 8 10 12 with Heat Shrink Set, 80Pcs Battery Cable Lugs Battery Cable Ends Ring Terminals Connectors with 80Pcs Heat Shrink Tubing Assortment Kit

  • 【What You Get:】In this set, we offer 10types 80Pcs of AWG 2 4 6 8 10/12 ring terminals copper lugs battery cable ends open end termination ring terminals with 80 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing for your work which meet your different needs..
  • 【Design High Quality:】 All the SC ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity, with tinned surface for corrosion protection.Can be Crimped or Soldered.inspection window design allows visual inspection of proper wire insertion.All the 3:1 shrink tube is well made of high quality material, thick and durable.They are for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable..
  • 【Reliable and Easy to Use:】All the cable lugs are common size which meet the US standard. Terminals with heavy duty construction improves high temperature durability and ensure connection reliability.
  • high standard flared opening for easy wire insertion. Meanwhile, these battery lugs can be crimped or soldered to the wire cable ends depending on your preference..
  • 【Wide Applications:】 These battery cable wire lugs are ideal u....
Check Stock

210Pcs Copper Wire Lugs AWG 2 4 6 8 10 12 with Heat Shrink Set, 100Pcs Battery Cable Closed End Tubular Ring Terminals Connectors with 110Pcs Heat Shrink Tubing Kit

  • 【What You Get】: 210Pcs ring terminal connectors kits, Including 100 pieces of AWG 2 4 6 8 10 12 copper lugs and 2 sizes 2 colors 110 pieces of 3:1 dual wall adhesive heat shrink tubing tubes to meet your different needs..
  • 【High-Quality】: All the ring terminals are made of annealed electrolytic grade copper for maximum current flow, and the surface is tin-plated to protect the copper from corrosion, which has good electrical conductivity and heat resistance. Also, the inspection window design allows visual inspection of proper wire insertion. The heat shrink tubing is made of polyolefin material, which is non-toxic and flame retardant..
  • 【Wide Applications】: Contains the 10 kinds of most commonly used copper wire lugs. Suitable for use in distribution box, marine, golf carts, solar panels, home applications, etc. Heat Shrink Tubing is Ideal Used for Vehicle, Motorcycle, Boat, DIY Electrical Wirings and Other Outdoor Applications..
  • 【Upgraded & Easy to use】: All the cable lugs are a common size that meets the US standard. Designed an inspection window to help you work better, and each copper lug has a specification mark so that you can quickly find the right terminal..
  • 【Buy with Confidence】: If you have any questions about your purchase, ....
Check Stock

OhLectric OL-43473 Lay-in Connector - Made with High Conductivity Copper Alloy - Copper Conductor Lay-in Connector - Ideal for Grounding Swimming Pool and Conduits - 4-14 Wire Range, Pack of 1

  • TOP QUALITY MATERIAL: Our copper lay in lug is constructed with high strength and high conductive copper alloy that makes it durable and more reliable for use. These connectors are strong enough to withstand various climates and temperatures, evidently prove these lay in lugs are highly corrosion resistant..
  • INGENUOUS DESIGN: Engineered deliberately with an open-faced design for easy to use purpose which allows the user to insert the copper conductor as a jumper to multiple conduits without breaking the grounding conductor. This copper lug is designed with a threaded hole which makes it easier to attach to concrete surfaces.
  • MULTIPURPOSE CONNECTOR: Since these direct burial lugs are highly durable they are most preferred to be used to ground swimming pools, spa equipment, copper conduits, etc.
  • the stainless steel screw comes with the grounding connector perfectly holds the conduits tight for a long period..
  • GUARANTEED SAFETY: These lay in connectors together with the stainless steel screw underwent several safety tests and both cULus and UL listed for grounding and bonding applications. Specifically designed for the safety grounding of wire range 14-4 AW, these UL467-Listed lugs are great for direct burial and bonding applications.
Check Stock

2 Gauge 2 AWG 10 Feet Black + 10 Feet Red (20 Feet Total) Welding Battery Pure Copper Flexible Cable Wire - Car, Inverter, RV, Solar by WindyNation

  • Included Items: Pure Copper Cable (select cable gauge, insulation color and length using the selection tabs) + 5pcs 5/16" STUD Copper Cable Lugs + 5pcs 3/8" STUD Copper Cable Lugs + 3 Feet Black Heat Shrink Tubing. Save time and money by purchasing all components in one product listing..
  • Made in the USA WindyNation Power Flex Cable is an ultra flexible PURE copper cable manufactured with a tough, solvent resistant EPDM insulation jacket. PLEASE SEE THE PHOTO GALLERY FOR A CABLE SPECIFICATION CHART (amperage, voltage, stranding, insulation and copper thickness, etc.).
  • Copper cable is SAE J1127 approved and uses annealed copper strands per ASTM standards.
  • Copper Cable Lug Description: pure copper with an exterior tin coating for corrosion protection (excellent for outdoor and marine applications). Cable lug utilizes a closed end design to protect cable from outdoor environment (i.e. moisture, acid, and solvents). Cable lug can be crimped or soldered. Flared barrel end design for easy entry of cable into the cable lug..
  • Heat Shrink Tubing Description: 600 volts, operating temperature -55 Celsius to +125 Celsius, resistant to most solvents and fire resistant (polyolefin material), black in color with no printing on tube. PLEASE SEE PHOTO GALLERY FOR A D....
Check Stock

2-4/0 Ga No-Crimp Three-Way Positive Lead Battery Terminals 1 per pack

  • Full Kit Set: All 50 pcs in one box, package includes 8*1/4(5PCS),....
  • Premium Quality: Our copper wire lugs are UL certified, offer reliable performance. Best battery terminal connectors, the wire copper connector is....
  • Excellent Design : Closed end design seals out moisture so cables stay dry and corrosion free. Also heavy duty construction for enhanced high....
  • Widely Application: Best choice for making terminator connections. The copper wire lugs are widely used in solar system, household appliances,....
  • Quality : We stand behind the quality of our products. If you have any question with your purchase, please contact us. We always will work on every....
Check Stock

10pcs 2/0 Awg - 3/8' (M10) Sanuke Wire Lugs Ring Terminal Connectors Ends Heavy Duty for Battery Cable Lug Wire Electrical Eyelets with 3:1 Dual Wall Adhesive Heat Shrink

  • ☆『What You Will Get:』In this set, we offer 10pcs 2/0 Awg - 3/8" (M10)ring terminals copper lugs tube end termination ring terminals for your work, 5Pcs black and 5 red 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube..
  • ☆『High Quality:』All the ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity. All the 3:1 shrink tube is well made of high quality material, thick and durable.They are both for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable..
  • ☆『Reliable and Easy to Use:』Terminals with heavy duty construction improves high temperature durability and closed design seals out the moisture, ensure connection reliability.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • ☆『Wide Applications :』These Copper Lugs are safe and reliable, great for distribution box, marine, golf carts, solar panels, home applications, etc.Heat Shrink Tubing is Ideal Used for Vehicle, Motorcycle, Boat, DIY Electrical Wirings and Other Outdoor Applications..
  • ☆『Customized Protector:』Our copper lugs are made out of a high-grade copper to protect against corrosion can be soldered or crimped and fi....
Check Stock

48PCS Battery Terminal Connectors Cable Ends,UL Listed AWG1/0 2/0 4/0 Crimp Copper Wire Ring lugs with Heat Shrink Tubing Assortment Kit

  • The Kit includes: total 48 pcs in one box, package includes AWG 1/0*5/16(4pcs),AWG 1/0*3/8(4pcs).AWG 2/0*5/16(4pcs),AWG 2/0*3/8(4pcs),AWG 4/0*5/16(4pcs),AWG 4/0*3/8(4pcs),Heat Shrink Tubing(24PCS)..
  • Premium Quality: Our copper wire lugs are UL certified, offer reliable performance. The wire copper connector is made from fully annealed electrolytic copper construction provides excellent conductivity. 100% annealed copper resists corrosion from salt and moisture..
  • Excellent Design : UL Tested & Approved,Can be Crimped or Soldered.Closed end design seals out moisture so cables stay dry and corrosion free. Also heavy duty construction for enhanced high temperature durability..
  • Widely Application: Best choice for making terminator connections. The copper wire lugs are widely used in solar system, household appliances, automobiles, electrical industry, mechanical equipment, distribution box, battery , inverters etc.
  • Hardness: HV: 120 - 70, Surface: Salt spray test 48H environmental protection fog tin, Material:T2 low resistivity copper.
Check Stock

Sound Percussion Labs High-Tension Marching Snare Drum with Carrier 13 x 11 in. White

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other Heads: Branded Case or Bag: Not Applicable Stand: Not Applicable Country of Origin: United States.
  • Smooth Finish with Tube Lugs With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2 mm hammered shell and produces warm tone, powerful attack and dry overtones.
Check Stock

Ludwig Copper Phonic Smooth Snare Drum 14 x 6.5 in. Raw Smooth Finish with Imperial Lugs

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other Heads: Branded Case or Bag: Not Applicable Stand: Not Applicable Country of Origin: United States.
  • Raw Smooth Finish with Imperial Lugs With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2 mm hammered shell and produces warm tone, powerful attack and dry overtones.
Check Stock