ReviewsCopper Pipe Flaring Tool

Cal-Van Tools 165 Master Inline Flaring Kit - Double and Single Flares Brake Flaring Tools Professional Tool Kit

Specifications: this flaring set includes 3/16 in., 1/4 in., 5/16 in. and 3/8 in. double and single flares which are designed to reduce the chance of....
Equipment Design: with compact design, the in-line flaring tool enables the user to flare copper or soft steel tubing in tight spaces. The double....
Flaring Tool Adapters: in-line flaring set is designed to simplify flaring chores. The design locks the adapter's cone and tube in a perfect line....
Tubing Tool Kit: with the clamp and screws laying pressure directly over the tube, there is a great chance of the tube slipping from the clamp.....
Durable Material: flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel materials — perfect for tough job sites.

Check Stock

Saipe 5 Pcs Swaging Tool Drill Bit Set 1/4 Inch Hex Shank Copper Pipe Flaring Tool Tube Expander Air Conditioner Copper Pipe Swaging Flaring Tool for Copper Tubing 1/4 3/8 1/2 5/8 3/4

【Swage Drill Bit Set】Size: 1/4'' (6.35mm), 3/8'' (9.5mm), 1/2'' (12.7mm), 5/8'' (15.9mm), 3/4'' (19mm). Total Length: 50/54/57/60/63mm. Shank....
【Tube Expander】Suitable for【Tube Expander】Suitable for hard and soft copper standardized, easy to braze swaging set. Come with 5 different....
【Durable For Use】Made of high quality bearing steel for high and uniform hardness and wear resistance. High elastic limit for good performance and....
【Swaging Tool】When installing the air conditioner, use a pipe expander to widen the copper pipe, so that the two copper pipes can be accurately....
【Easy to Use】Just need to install it on the electric hand drill to use. Flaring tool drill bit set are small in size, so you can take it with you....

Check Stock

Henna (Persian) - Copper, 4 oz ( Multi-Pack)12

Made of premium alloy steel material, heavy duty construction guarantee a professional job..
Easy to use, comfortable hold and labor-saving..
This tool kit is specially designed for pipe flaring and can be used for copper, brass and aluminum pipes..
All parts are neatly packed in a storage case, convenient to carry and use..
Widely used in air conditioning, air heater, refrigerator maintenance and other household electrical products.

Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

[Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
[Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
[Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
[Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
[Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..

Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....

Check Stock

Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting 90 Degree Elbow 1/2 x 1/2 Tube OD

Three piece construction - nut, sleeve and body..
USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe..
Easy to disassemble no flaring tool required - See chart for Assembly instructions..
Primary uses water, gasoline, oil and vacuum lines.

Check Stock

LIAMTU Tubing Flaring Tools Kit Heavy Duty Steel Swage Tool Set Include Pipe Cutter & Ratchet Wrench

ALL INCLUSIVE KIT: LIAMTU tubing flaring tools kit includes all the parts to finish a tubing flaring&swaging work.
WIDE RANGE OF APPLICABILITY: this flaring kit can finish 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. tubing flaring work.
HIGH HARDNESS MATERIALS: the flaring tool, pipe cutter and ratchet spanner are made of the sturdiest steel materials and chromed finished for easy....
SELF-CENTERING YOKE: two bars included covering nine sizes with a self-centering, slip-on forged steel yoke to help form professional and quality....
EASY TO CARRY: all parts can be put into a blue color hand carrying plastic case.

Check Stock

Joywayus 40PCS 3/8 Tube OD Brass Compression Insert Tube Fitting

Suitable for the outer diameter of the pipe:3/8"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Check Stock

Joywayus 40PCS 5/16\ Tube OD Brass Compression Insert Tube Fitting

Suitable for the outer diameter of the pipe:5/16"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Check Stock

Ambienceo 45 Degree Traditional Extrusion Type Flaring & Swaging Tool Kit OD Soft Copper Tube Cutter W/Carrying Case

Flares 9 Tube sizes: For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
5 swage adapters that swage 7 tube sizes: 3/16",1/4",3/8",5/16",1/2",5/8"& 3/4" O.D.Tubing.
Copper tubing flaring tool and copper tubing swaging kit in a combination tubing flaring swaging kit to meet all your needs.
Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
Self centering, slip-on forged steel yoke.

Check Stock

Eastwood Professional Brake Line Flaring Tool Kit | 45° Degree Single Double & Bubble Brake Tubing Flares | Use with Hydraulic Hose | Ideal for Stainless Steel Tube or Copper Pipe | Inc 4 Split Dies

MULTI USE FLARING TOOL: This is an all in one brake line flaring tool kit device. Easily create precision single flare, double flare, or a bubble in your tubing. A high quality OEM style flare is essential, as nobody likes leaks especially in hydraulic, or brake lines. With the Eastwood tubing flare tool you’ll always get quality reliables results time after time!.
HOW TO USE: Use stainless steel, steel, or any other soft metal like copper tubing of 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch and 4.75-mm diameter. Meaning this tool is multi purpose and ready to help with automotive brake lines, hydraulic lines, or even with plumbing pipes. Next simply use the rotating turret style flaring die mount to create the suitable flare for your needs..
EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
SAFETY INFORMATION: Always wear eye protection when operating the Flaring Tool as oils, grease and metal particles may be ejected while the tool is in operation. Make sure that th....

Check Stock