ReviewsCopper Pipe Water

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

Watts 175C Ball-Type Copper Adapters for Solder or Hose Washing Machine Shutoff Valve, Bronze, 1/2 Inch

  • This washing machine shutoff valve requires no special tools and connects copper, PEX, CPVC, and PE-RT pipe in any combination.
  • Bronze body construction with 1/2 inch sweat copper ell adapters for copper tubing, 3/4 inch hose outlet connection, and O-rings for a water tight seal.
  • Rated to 200 PSI and 200 Degrees F for use in potable water and hydronic heating applications.
  • Single lever on-off and suitable for residential or commercial applications.
  • This water shutoff valve controls both hot and cold water simultaneously.
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

Stampede Stills 20oz Copper Half Gallon Widemouth Mason Jar Thumper Kit

  • Made from 20 ounce copper sheet, silver based lead-free solder, gasket, and is 1/2" copper pipe. The inlet pipe has an elbow to prevent hot spots on....
  • 1/2" copper pipe stubbed out for easy plumbing to your existing still. Additional pipe/coupling/unions to connect to your setup are NOT included as....
  • Works on 1/2 gallon canning Mason jars with standard wide mouth lids..
  • Works on widemouth mason jars (setup requires prior ownership of 1/2 galllon jar and band to work).
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

  • 【Precision Cutting】 - The 2 inch metal pipe cutter tool is equipped with sharp SKD cutter wheels and 6 high-density ball bearing rollers to ensure a firm grip on pipe during tube cutting process, especially for various metal, stainless steel, copper pipes and tubes. It saves you from the trouble of uneven cutting surface due to unstable clamping..
  • 【Heavy Duty】 - The copper pipe cutter is made of high-density but lightweight aluminum alloy, which is durable and compact. Copper tubing cutter can ensure your cutting work is smooth and will not break after many cuts, and has a longer service life. And the aluminum alloy body makes the conduit cutter more suitable for cutting high-density metal materials..
  • 【Clean Cutting】 - The stainless steel pipe cutter with 6 ball bearings provides you with smooth cutting and improved cutting efficiency. However, some small burrs on the edges are inevitable in the process of cutting tube. That's why our aluminum pipe cutter is equipped with a deburring tool pipe reamer, which consists of a sturdy plastic construction and a high-speed steel blade. It can ream the inside and outside of the cut to prevent scratching..
  • 【Ease Of Use】 - The bottom of the brass pipe cutter is equipped with a knob, which is comfor....
Check Stock

WADEO HVAC Repairing Tools, Air Conditioner Copper Tube Swaging Tool with Expander Drill Bit, Copper Pipe Cutter and Deburring Tool for Copper, Aluminum and Thin Stainless Steel Tube

  • Drill Bits: Made of durable and wear-resistant bearing steel, it is not easy to break, When the air conditioner is installed, These drill bits can expand the copper pipe, so you can link the two copper pipes to each other..
  • Mini Copper Pipe Tubing Cutter(1/8" - 1 1/8"): It can cut copper tube, steel pipe, stainless steel tubing, aluminium piping PVC and iron. But we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • Deburring Tool: With ergonomic handle for secure grip, the blade is mounted on the handle can be rotated 360 degrees, this tool helps to clean the top of the pipe or tube and it has a compact size which is easy to be carried to anywhere.(The blade is hidden in the pen holder).
  • Drill Bits Size: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Package Include: 3-28mm（1/8"-1-1/8"）Tube or Pipe Cutter*1.
Check Stock

Stampede Stills Copper Quart Widemouth Mason Jar Thumper Kit with Quart Jar Sleeve

  • Made from 20 ounce copper sheet, silver based lead-free solder, gasket, and is 1/2" copper pipe. The inlet pipe has an elbow to prevent hot spots on....
  • 1/2" copper pipe stubbed out for easy plumbing to your existing still. Additional pipe/coupling/unions to connect to your setup are NOT included as....
  • The Stampede Stills Quart jar insulator is great for all drinking occasions and works well to insulate the jar during use..
  • Works on widemouth mason jars (setup requires prior ownership of quart jar and band to work).
Check Stock

OhLectric OL-38707 High-Conductivity Ground Pipe Clamp - Made of Copper Alloy - Connecting Grounding Electrodes to Water Pipes Clamp - Non-Direct Burial Pipe Clamp - ½ Inch - 1 inch Pipe Range

  • TOP QUALITY: Constructed using premium quality copper alloy, these copper ground clamps are extremely durable with high strength and are built to last for a lifetime. Our pipe clamps are designed to fit and organize in a safe manner with the maximum flexibility to suit your needs!.
  • MULTIPURPOSE: These pipe ground clamps are an excellent choice for either clamping the pipes to the grounding electrode or you can even use these clamps to securely mount the pipes on walls. It can also be used for connecting bare wires to pipes or steel water pipe or tubing..
  • CORROSION FREE: The ground clamp for pipe can be attached to the grounding electrode and the pipe by the means of indirect burial with the screws provided. To prevent rusting, the screws are coated with zinc plated steel alloys which totally eliminates the chances of corrosion on the clamps..
  • SAFETY TESTED: All our products are certified by Culus for their safety and specification standards set by them. We follow every step to ensure all the housing rules and regulations are followed as we value customer satisfaction and safety more than anything else..
  • ADAPTABLE FIT: These pipe grounding clamps come in a variety of sizes which are well equipped for all wire ranges between 2-10. And also they support all....
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

[5 in 1]Swaging Tool Copper Tube Expander Manual Copper Pipe Swage Too Expander Drill Bit Soft Copper tubing Tool bit with for HVAC Repairing Air Conditioner

  • Material:This Manual tube expander is bearing steel material, blackened surface treatment process to prevent pipe drill bit rusting..
  • Contains: 6pcs hexagonal handle tube expander + 5pcs bell mouth expander,Air Conditioner Copper Tube Expander Tool Drill Sets.
  • Specifications: 7/8 (22.2mm), 3/4 (19mm), 5/8 (15.9mm), 1/2 (12.7mm), 3/8 (9.5mm), 1/4 (6.3mm).
  • Function: When the air conditioner is installed, expand the copper pipe to make the two copper pipes interconnected. (It needs to be installed on a hand electric drill).
  • Operation method: according to the expanding pipe diameter, select the corresponding expanding head and install it. In order to prevent the edge of the pipe from cracking, the tip of the expanding head should be used to expand the pipe. Then insert the whole expanding head into the copper tube and apply force evenly until the cup mouth is formed..
Check Stock