ReviewsCopper Slag

Swpeet 5Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves, 8 Inch Welding Plier and 10 Inch Welding Chipping Hammer with Steel Coil Spring Handle

☛ 1, What You Get ------ In this kit, You will get 5Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 piece welding plier, In total 5Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb the s....

Check Stock

INETUB BA71TGS .030-Inch on 2-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire

Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feed-ability, Easy to weld.
Shielding gas is not required, All positions, Single and multi pass welding.
Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.

Check Stock

44 lb Roll ER70S-6 0.035\ - 0.045\ Mild Steel Mig Welding Wire (0.035\ X 44#)

Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
Shielding gas is not required, All positions, Single and multi pass welding.
Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.

Check Stock

YESWELDER Flux Core Gasless Mig Wire Mild Steel E71TGS.030-Diameter 2-Pound Spool

[E71T-GS] Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld..
[APPLICATIONS] Excellent for outdoor windy conditions, Shielding gas is not required, All positions, Single and multi pass welding..
[EXCELLENT PERFORMANCE] Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance..
[WELDING METHODS] Vertical Welding, Flat Welding, Up Welding, Corner Welding..
[SPECIFICATIONS] Weight: 2lbs/Diameter: .030''(0.8mm).

Check Stock

YESWELDER Flux Core Mig Wire, Mild Steel E71TGS.030-Diameter, 10-Pound Spool

[E71T-GS] Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld..
[Good Performance] Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance..
[Applications] Excellent for outdoor windy conditions, Shielding gas is not required, All positions, Single and multi pass welding..
[Brand-new Plate] Use new ABS materials, Durability, Toughness, Anti-Fragility..
[Specifications] Weight: 10lbs(4.5kg)/Diameter: .030''(0.8mm).

Check Stock

Hilitchi 4Pcs Welding Slag Removal Tool Set, 8inch Multi-Function Welding Pliers, Welding Chipping Hammer with Coil Spring Handle, Wire Brush Wire Scratch Brush for Cleaning Rust and Welding Gloves

【GREAT CRAFTMANSHIP & QUALITY MATERIAL】Scratch wire brush slag remover is made of high quality steel wire, compact bristles. Welding chipping hammer Carbon steel, heat treatment, high hardness and toughness and is with spring loaded with black. The welding pliers is with ergonomic grip, easy to operate. Practical slag removal tool we offer..
【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use..
【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use.....

Check Stock

Plasma Cutter 50 amp 110/220V Non-Touch Pilot Arc 1/2 Clean Cut Automatic Dual-Voltage IGBT High Frequency Inverter Portable Air Plasma Cutting Machine,CUT50DP

★NON-TOUCH PILOT ARC: Cuts rough,painted,rusty surfaces efficiently but produces minimal slag.Cut without touching the metal,better cutting quality....
★CUTTING EFFECT : The plasma cutter with high cutting speed,cutting smoothly.10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance....
★USE WIDELY: Safe design,suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, thin Aluminum, etc. It is HF arc starting plasma....
★HIGH QUALITY ACCESSORIES: Use better air regulator and wearing parts include AG60 pilot arc torch, work with standard parts, you easy to find the....
★SATISFACTION GUARANTEED:Offer 30-days refund/replacement and 1 year warranty,customer care team is always ready to help when you need, and provide....

Check Stock

HSTECH Welding Chipping Hammer with Coil Spring Handle, 10.5\

The Welding Hammer: Spring handle welding chisel hammer skimmer. Used for removing slag and welding residue..
The Spring Welding Design: Spring handle is designed to absorb the shock of contact while cleaning and shipping way welding debris. One end is a flat chisel and the other end is a conical chisel to get into tight spots..
2Pack Shoe handle wire scratch brush, 0.012" fill diameter, 5-1/4" brush length, 1-1/16" brush width, 10" overall length..
Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds. This type of welding hammer is a durable tool for long strokes. It can also be used as a life hammer and broken ice hammer..

Check Stock

VASTOOLS Welding Chipping Hammer with Coil Spring Handle,10.5 ,Cone and Vertical Chisel/ 10 Wire Brush Free

High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length..
Spring handle designed to absorb the shock of contact while cleaning and shipping way welding debris..
Tempered chisel on one end and point on the other.1-1/16" width chisel to remove welding slag faster..
Shoe handle wire scratch brush, 0.012" fill diameter, 5-1/4" brush length, 1-1/16" brush width, 10" overall length..
Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..

Check Stock

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, 1/2 Inch Clean Cut, Brown & PCS22 Plasma Cutter Consumables Sets for Brown Color LTP5000D and Brown Color LTPDC2000D (22)

...inimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
Product 1: ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
Product 1: ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP5000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33".
★ NOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set.
Product 1: ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
Product 2: Only Compatible with BROWN Color Lotos LTP5000D, LTPDC2000D..
Product 2: NOT Compatible with Red Color Lotos LTP5000D, LTPDC2000D..
Product 2: Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide.
Product 2: NOT Compatible with any other Brand and any other Model of plasma cutters.

Check Stock

Air Scaler Gouge Chisel Micro Air Flux Chipper Pneumatic Scraper Medical Gypsum Breaker Stomatology Engrave 5pcs Flat Chisel Bull Point Chisel

Air Chisel is used to remove medical gypsum , remove welding slag , stone carving , woodworking engraving..
Powerful Air Scaler Chisel: fast to break out the plaster..
Great for demolition plaster, remove medical gypsum, art carving, welding slag removal..
Include: Air Scaler Chisel x 1pc, Chisels x 5pcs, Pipe x 1pc, Plug x 1pc.
Pneumatic Chisel is deal for tracery, stone sculpture, wood carving, marble sculpture..

Check Stock