ReviewsCopper Solder

MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length

  • ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random..
  • ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft..
  • ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder..
  • ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board..
Check Stock

Soldering Iron Tip Cleaner 4 Pack Non-slip Solder Cleaner with Case Holder No Water Needed Solder Tip Cleaner Soldering Iron Cleaner

  • Solder tip cleaner adopts premium copper material, effectively prevent iron tip oxidation, to prolong tip service life..
  • Our soldering tip cleaner will not reduce the tip temperature when using, to improve your working efficiency greatly..
  • The solder iron tip cleaner adopts ball shell design to prevent residual solder stained your working area..
  • No water needed when using solder cleaner, very convenient to use..
  • Package include 3 pack soldering iron cleaners with 1 holder case, Safe and no risk to use than conventional tip tinners..
Check Stock

Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid

  • ... and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs.
  • If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning，At the same time, in order to prevent burns, do not directly touch the solder core at close range during use..
  • If for any reason you are not 100% satisfied with lesnow solder cores, we support you with a full refund. If you have any questions about the use of the product or the product is damaged, please contact us and our engineers will....
Check Stock

CCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length

  • ☃[Package Include] You will get 2 packs No-Clean Solder Braided Wicks.
  • ☃[Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick.
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
  • ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock

FEITA Soldering Tips 900M-T-LI Solder Iron Tip 0.8mm Point Diameter (5-Piece)

  • High quality and long lasting use life of 900M solder iron tips, up to 40,000 solder joints can be used..
  • Soldering iron tips Fits for Hakko, Atten, Quick, Aoyue, Yihua, X-Tronic,Vastar,Sywon,Tabiger,SOAIY and other brand soldering iron station..
  • 5 Pieces 900M-T-LI solder iron bits' point Dia. : 0.8mm / 0.031".
  • color : silver Tone, solder tips long pointed tips can fit on many kinds DIY Electronic Repair..
  • Brand new and best Copper & Iron metal material,Lead -free of soldering tips replacement for electronic soldering & repair the different components of PCBs..
  • 100% No-Hassle, RISK FREE Money Back Guarantee! if you are not satisfied, we will give you a full refund or a replacement. Feita soldering iron tips have perfect stocking stuffer..
Check Stock

6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length

  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Check Stock

CCOZN 2 Pack 19.6Ft Solder Wick, No-Clean Solder Braided Wick Desoldering Wick For Solder Removal Tool, 0.1 Inch Width 3m Length for Each

  • ☃[Package Include] You will get 2 pack No-Clean solder braided wicks.
  • ☃[Appropriate Size] Package includes 2 pack 2.5mm x 3.0 m / 0.1 inch x 9.8 ft solder wicks.
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
  • ☃[Solder Braided Wick]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock

Solder Wick Braid Copper Wire with flux 10 ft 3M Length X 2.5mm Width I Desoldering Wire I Solder Sucker I Solder Remover I Soldering Iron I Solder Braid for Circuit Board 1pcs

  • ✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering wick that contains 2% RMA (Rosin Midly Activated) flux..
  • ✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs..
  • ✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process..
  • ✔️GREAT PROPERTIES: Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent thermal conductivity. Job done faster and efficiently without damaging circuit board sensitive pads, welding points or SMD components..
  • ✔️SCOPE OF APPLICATION: For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct solder bridges, Clean excess solder from PCB during solder, desolder, rework or reflow process..
Check Stock

SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack of 10 Foot Solder Wick Spools

  • 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action..
  • High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures..
  • Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes..
  • Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads..
  • PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant..
Check Stock

Hakko CHP TR-30-58 Medium Soft Wire Cutter, Chamfered Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 8mm Jaw Length, 14 Gauge Max Cutting Capacity

  • Product 1: Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire.
  • Product 1: 2.5mm heat-treated carbon steel construction provides durability and long life.
  • Product 1: Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
  • Product 2: Available with standard or anti-static bobbins.
Check Stock

Solder Wire and Rosin Paste Flux Kit - 60-40 Tin Lead Rosin Core Solder Wire 0.6mm 50g and Rosin Paste Flux for PCB Electrical Soldering and DIY from Plusivo

  • Solder Wire: Included in the kit is a high quality 50 grams 60-40 (Sn/Pb) Tin - Lead rosin core solder wire alloy with 0.6mm diameter and 1.6% flux....
  • Rosin Paste Flux: This high-quality rosin flux soldering paste facilitates the flow of solder, thus increasing the efficiency of the soldering process....
  • BONUS Items: Aside from the solder wire and rosin paste, this kit also includes 2 mini screwdrivers and two 22 AWG Wire tinned copper PVC jacket, a....
  • Durable Carton Box: All items are neatly packed inside a durable carton box to keep them organized, secured, and easy to carry and transport anywhere..
  • Satisfaction Guarantee: The Solder Wire and Paste Kit is backed by the manufacturer’s 30-day money-back guarantee and lifetime customer support,....
Check Stock