ReviewsCopper Terminal Blocks

micrl 2/0 AWG 350A Battery Quick Connect/Disconnect, Jumper Cable Plug Connector Kit for Recovery Winch, Towing Systems(Gray)

  • Suitable for: Gauge battery quick connectors provide a simple way to connect or disconnect winches trailers or for any other requiring high current, quick disconnect connectors..
  • Durable: The battery quick connect plug is made of sturdy PC fireproof material, equipped with a rubber boot cover to prevent dust, durable and reliable, not easy to break, and long service life..
  • Easy installation: Just insert the wire into the terminal pin, then solder or press, the connector ends are the same, so either end is suitable for connecting the power supply or the load side.
  • Stability function: There are 30 terminal pins made of red copper in the package, which are covered with silver and have strong conductivity, which can reduce resistance and ensure voltage and current stability.
  • You will receive: 15 sets of 12-36v battery quick connectors are included in the package, including 15 connectors, 30 terminal blocks and 15 covers..
Check Stock

DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub

  • ... ohm or 2 ohm speaker, the power will be automatically limited to 15W..
  • Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
  • Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
  • Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
  • available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity level..
Check Stock

TKDMR 2Pairs Car Battery Cable Terminal Clamps-Connectors - Battery Terminal with Plastice Cover,Good Contact,Corrosion Resistance,Applicated in Car,Van.

  • √【Package Includes】: Our kit includes 2 pair of Negative and Positive Battery Cable Terminal Clamps Connectors and 4 pieces Pure Copper Wire Lugs Battery Cable Ends Copper Eyelets Tubular Ring Terminal Connectors..
  • √【High Quality】: Our Wire Lugs Eyelets Tubular Ring Terminal all are made of pure copper.And the Battery Terminals connectors has plastic cover, which is connected better than zinc alloy and has better corrosion-resistance..
  • √【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
  • Positive Battery Terminal Connectors: 5/8"(16mm).
  • √【Applicated Scene】: It is used for automobiles, trucks and caravan battery terminal connector..
  • √【Quality Guarantee】: We are manufacturers. So don't worry about quality. We are highly confident with our products.you won't regret it if you got it! Buy it now!.
Check Stock

Audio Amplifier Board, DROK 5W+5W Mini Amplifier Board PAM8406 DC 5V Digital Stereo Power Amp 2.0 Dual Channel Class D Amplify Module for Speaker Sound System DIY

  • ...W (8Ω 5V). Input method is monaural input..
  • Artificial Material: this New-designed mini power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the digital amplifier module is with high efficiency of over 90%, general harmonic distortion noise is less than 10%, low quiescent current and noise suppression..
  • Safe Protection: the class D dual-channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection.
  • Additional Function: it is available to connect amplifier type to choose different function (MODE: high electricity level is Type D, low electricity level is Type AB. Factory defaults high electricity level).
  • available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory default high electricity level..
Check Stock

Jienk 5Pcs 4-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Connector for 28-16AWG

  • 【Terminal Pitch】3.5mm/ 0.14inch pitch PCB terminal block connector..
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
  • 【Package Includes】: 5 x PCB Terminal Blocks..
Check Stock

Blue Sea Systems ST-Blade Water-Resistant 4 Circuit Fuse Block, 5056

  • Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32.
  • Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools.
  • Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers.
  • Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required and 4 write-on circuit labels.
  • Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire.
  • Fuses and circuit breakers sold separately. Storeage for spare fuse and fastener in cover.
  • Not ABYC compliant, not intended for marine applications, use PN 5056100 for marine use.
Check Stock

Erayco USLKG5N DIN Rail Mounted Ground Circuit Connection Terminal Block, 600V 30A, Screw Clamp (Pack of 20)

  • Type: USLKG5N Ground Earth Screw Type Terminal Blocks Wire Connector.
  • Material: Nylon PA66 Housing + Fine Copper + Nickel-plated Screws.
  • Application:Conduct Electricity, Transmission of Electrical Signals.
  • Rated current: 30A. Large wire funnel entry, Solid Wire (AWG/mm2): 24-10, flexible(AWG/mm2): 24-10.
Check Stock

Screw Terminal Block 2.54mm Pitch 2 & 3 Pole (50 Piece Kit) by QSU

  • Can accommodate wire sizes from 26 - 18 AWG.
  • 25 - 2 pole & 25 - 3 pole terminal blocks included in kit.
  • Terminal blocks can be soldered in place.
Check Stock

2pcs 12V Automotive Top Post Car 3 Way Battery Wire Cable Terminals Clamp Connectors Kit Positive and Negative Set Red & Black

  • 【Dimension】Size: Appro2.16X1.37X1.77 inch (As the picture show) ..
  • 【Sturdy & Durable】Our quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss.Positive Negative Battery Terminal Material: Pure Copper + Plastic..
  • 【Easy to use】Our products——the battery post terminals Connectors Copper Color: Red(+) & Black(-).Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
  • 【Wide application】These battery terminal connectors can be used for most 6/12V Cars, Vans, Caravan, Motorhomes, boat, Truck Batteries etc. Just make sure to connect the correct terminal for the correct polarity..
  • 【You will get】2Pcs pure copper battery terminals connectors.I believe our product can fully meet your requirements. If you have any questions, please feel free to come to us, we will provide high-quality guarantee and friendly customer service..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...able (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
Check Stock

ORAEVY Car Battery Cable Terminal Clamps，Negative and Positive Connectors ，Battery Terminal with Plastice Cover Compatible with Car,Van,Truck.

  • 【Applicated in】: It is used for most automobiles, Van，trucks，boat and caravan battery terminal connector..
  • 【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
  • Negative Battery Terminal Connectors: 5/8"(16mm).
  • 【High quality & durable】:Our Battery Terminals Connectors are using electroplating process ，The corrosion resistance is quite good.And the....
  • 【Package Includes】: 1pair of Negative Black (-) and Positive Red (+) Battery Cable Terminal Clamps Connectors and 2 pieces Pure Copper Wire Lugs....
  • 【Professional after-sales】：Buy with confidence! We sell professional auto parts and provide free technical support. If you have any problems or....
Check Stock