ReviewsCopper Tubing Fitting

Anderson Metals - 00069-1212 Brass Tube Fitting Elbow 3/4 Compression x 3/4 Male Pipe

  • 90-degree elbow for connecting two pipes or tubes at an angle.
  • Fitting connects to pipes or tubing on one end and an NPT male connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -65 to 250 degrees F.
  • Suitable for copper, brass, aluminum, and steel tubing.
Check Stock

Parker A-Lok 8ECR8-B Brass Compression Tube Fitting, Cross, 1/2\ Tube OD

  • Cross for connecting and branching four pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Hex nut construction for tighter, leak-free connections.
  • Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing.
Check Stock

LASCO 19-6183 Push-in Fitting with 3/8-Inch OD Tube and 1/4-Inch Compression Female Thread Plastic

  • 3/8-inch OD tube x 1/4-inch compression female, 7/16-24 thread.
  • Good for use on PEX, poly, copper OD tubing.
Check Stock

VE-FITS Bulkhead Union, Brass Compression Tube Fittings (1/4\ OD (1 piece))

  • Bulkhead union mounts on a wall or bulkhead to allow connections on either side of barrier.
  • Fitting connects to tubing on either side of a bulkhead.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Hex nut construction for tighter, leak-free connections.
  • Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing..
Check Stock

LASCO 19-6193 Female Pipe Thread Adapter Push-in Fitting with 3/8-Inch OD Tube and 1/2-Inch Plastic

  • 3/8-inch OD tube x 1/2-inch female pipe thread.
  • Good for use on PEX, poly, copper OD tubing.
Check Stock

VE-FITS Bulkhead Union Brass Compression Tube Fittings 3/8 OD tube 1 piece

  • Bulkhead union mounts on a wall or bulkhead to allow connections on either side of barrier.
  • Fitting connects to tubing on either side of a bulkhead.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Hex nut construction for tighter, leak-free connections.
  • Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing. Thread size: 9/16-24..
Check Stock

Parker A-Lok 4BC4-B Brass Compression Tube Fitting, Bulkhead Union, 1/4\ Tube OD

  • Bulkhead union mounts on a wall or bulkhead to allow connections on either side of barrier.
  • Fitting connects to tubing on either side of a bulkhead.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Hex nut construction for tighter, leak-free connections.
  • Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing.
Check Stock

LASCO 19-6181 Thread Adapter for Faucet Connection Push-in Fitting with 1/4-Inch OD Tube and 1/4-Inch Compression Female Thread Plastic

  • 1/4-inch OD tube x 1/4-inch compression female, 7/16-24 thread.
  • Good for use on PEX, poly, copper OD tubing.
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • 【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks....
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock