ReviewsCopper Tubing Flare Tool Kit

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • ... brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instructions for use.
  • PACKAGE CONTENTS: Package includes hardened flaring bar assembly clamps with 10 SAE & me....
Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

  • MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
  • UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
  • MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
  • WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Check Stock

Mophorn Hydraulic Flaring Tool Kit with Tube Cutter Flare Tool Kit Deburrer Fuel Line 8PCS Swage Adapter Flaring Tool Kit for 3/16 to 7/8 Inch

  • ...o last, saving your money. Besides, the flaring tool kit is stored in a plastic toolbox that is not easily broken, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum pipes. It is a great tool for repairs on vehicles or making lines off a vehicle, suitable for the refrigeration and air conditioning industry..
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

The Stop Shop Inverted Double Flare Tool for 3/16 Inch and 1/4 Inch Tubing with Hard Plastic Case

  • This flare tool will make inverted 45 degree double flares for 3/16" AND 1/4" tubing. Not recommended for stainless steel tubing.
  • Included: Plastic hard case for storing, removable handle and block, double sided OP tool for both 3/16" & 1/4", tube stoppers for both 3/16" & 1/4" & an allen key wrench.
  • We recommend using this on regular steel and copper nickel tubing.
  • The handle is removable if you prefer to use it in a bench vise. You can also use this while the tubing is still on the car..
Check Stock

Yellow Jacket 60278 Flaring Tool

  • A Full Range 1/8 To 3/4 Inch O.D. Flaring Tool Available For Copper, Brass And Aluminum Tubing.
  • Self-Centering Yoke For Precise 45 Degree Flare Grips Without Marring Or Constricting Tube.
  • Automatic Tube Height Gauge For Correct Tubing Height.
Check Stock

Sutekus Brake Line Flare Tool Double Flaring Tool Kit Single Flares for Automotive Brake Line Replacement Brake Repair

  • Kit includes flare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1, carrying case x 1..
  • Flaring adapters size: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8".
  • Tubing cutter has a 1/8" to 1-1/8" capacity with inner outer reamer..
  • Carrying case is included for quick organization and easy transportation..
  • Perfect for bending most soft steel, aluminum, brass and copper pipes etc..
Check Stock

37 Degree Flaring Tool for Stainless Steel Line

  • This is the best 37 degree flaring tool for the money we have found.
  • Features a ratcheting feed screw that has a hardened flaring cone supported by needle bearings to provide the most accurate flare possible.
  • Works with tubing sizes of 3/16", 1/4", 3/8", 1/2", 5/8" and 3/4" outside diameter.
  • Compatible with steel, stainless steel, copper, brass and aluminum tubing with .035" wall thickness.
  • Creates profesional leak free flares with minimal effort.
Check Stock

Ambienceo 45 Degree Traditional Extrusion Type Flaring & Swaging Tool Kit OD Soft Copper Tube Cutter W/Carrying Case

  • Flares 9 Tube sizes: For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • 5 swage adapters that swage 7 tube sizes: 3/16",1/4",3/8",5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Copper tubing flaring tool and copper tubing swaging kit in a combination tubing flaring swaging kit to meet all your needs.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke.
Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

  • Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
  • Direct Replacement For Your Worn 3/16” Die Set.
  • Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
  • This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.
Check Stock

IWISS PEX Copper Pipe Ring Crimping Tool Kit for 3/8 in 1/2 in 3/4 in 1 inch Pex Crimp Rings Meets F1807 Standard

  • Multi-Head PEX Crimp Tool Kit: IWS-FAS copper ring crimp tool kit includes 3 exchangeable die sets(1/2'', 3/8'', 3/4'') and built-in 1'' jaw, Go/No-Go....
  • Purpose: IWS-FAS F1807 PEX crimp tool kit is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 4 major sizes of PEX tubing - 1/2", 3/8", 3/4" and 1". Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX....
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock