ReviewsCopper Tubing Flare Tool Set

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.

Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..

Check Stock

Wostore Eccentric Flaring Tool Kit Tubing Refrigeration 7 Dies 3/16-3/4 inch Copper

【Practical Tool】Create 45 degree precise flares in soft copper, brass, aluminum and mild steel tubing.
【Available Sizes】For flaring 7 dies size: 3/16,1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 -inch sizes..
【Convenient Operation】A single clamp screw provides for easy clamping and removal of tubing, large feed screw handle for smooth turning with little effort, easy to operate..
【Uniform Flares】Features a durable eccentrically-mounted, hardened steel flaring cone for even metal flow.Produces a rolling action for uniform flare walls without galling in tubing..
【Securely & Safely Stored】Blow molded hard plastic storage case keeps tools contained and organized, provides a convenient handle for easy transportation and portability..

Check Stock

Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter

Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.

Check Stock

Mophorn Hydraulic Flaring Tool Kit with Tube Cutter Flare Tool Kit Deburrer Fuel Line 8PCS Swage Adapter Flaring Tool Kit for 3/16 to 7/8 Inch

...o last, saving your money. Besides, the flaring tool kit is stored in a plastic toolbox that is not easily broken, reducing the possibility of missing parts. It is compact and easy to carry..
Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum pipes. It is a great tool for repairs on vehicles or making lines off a vehicle, suitable for the refrigeration and air conditioning industry..

Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

... brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
Fixed head and angles make clean, precise flares.
Yoke type compressor with T-bar handle for firm grip.
For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
Pull back the blade and revolve the pipe while compressing.
2 rollers prevent skipping and jumping for most consistent tracking.
Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
Includes double flaring and bubble flaring instructions for use.
PACKAGE CONTENTS: Package includes hardened flaring bar assembly clamps with 10 SAE & me....

Check Stock

Libraton Mini Tubing Cutter Copper Cutter 1/8\ to 1-1/8\ with Deburring Tool & Replacement Blade for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

SPECIFICATIONS: Libraton Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
GREAT FOR SMALL SPACE: This tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
HIGH PERFORMANCE CUTTING BLADE: Blade of our pipe cutter is made of most durable and high quality Alloy Steel for quick and clean cut. Our copper cutter also comes with a deburring tool..
STURDY: The copper tube cutter body is made of light weight and durable heavy duty alloy steel, 2 flare groove rollers for precision cuts operation, strong corrugated knob for comfortable stable operation..
EASY TO OPERATE & AFTER-SALE SERVICE GUARANTEE: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..

Check Stock

25Ft 3/16 Copper-Nickel Coated Alloy Brake Line Tubing Coil Kit Tube Roll with 16 Fittings

25 Ft Roll x 3/16" copper-nickel alloy COATED OD Zinc plated steel brake line tubing with 16 assort fittings..
It won't rust, corrosion resistance, extremely easy to bend by hand and flare by simple tools..
The brake line is very flexible and very easy to bend and flaring to mount - you can manually bend our brake lines without the need for a bending tool.
It includes SAE flare Nuts and meets relative international standards..
With superior durable material and great performance for longer use..

Check Stock

MASTERCOOL 71700 Black Hydraulic Flaring and Swaging Tool

HAND-HELD HYDRAULIC PUMP requires a few simple pumps to flare and swage copper tubing.
45˚ FLARE includes sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
EXPAND tubing using sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
INNER-OUTER REAMER provides a full metal grip and is designed to remove inner burrs easily.

Check Stock

4LIFETIMELINES Economy Brake Line Flare Kit for Single, Double (SAE) Flares & Bubble (ISO) Flares - 2 Flaring Bars, 9 Flaring Dies, Tubing Reamer, & Storage Case

Creates single, double inverted (SAE) flares & bubble (ISO) flares up to 0.040″ wall thickness.
Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing.
Includes flaring dies for sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 4.75mm, 6mm, 8mm, 10mm.
Self-centering yoke has corresponding slots to hold bar assembly tightly in place during flaring.
Contents Include: (1) SAE Forged Alloy Steel Flare Bar, (1) Metric Forged Alloy Steel Flare Bar, (1) Self Centering Premium Yoke, (10) Flare Die Heads, (1) Tubing Reamer 3mm-12mm, (1) Rigid Plastic Storage & Carrying Case.

Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
Direct Replacement For Your Worn 3/16” Die Set.
Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.

Check Stock