ReviewsCorner Cutting Machine

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

ATLIN Corner Chisel - Square Mortise Chisel for Hinge Mortises, Door Installation, Framing, Woodworking

  • Save Time – The ATLIN Corner Chisel is designed to quickly, easily, and accurately chisel 90-degree square corners. Will square up to a 3/8” radius corner.
  • No Measuring, No Mistakes – The spring-loaded corner mortising chisel is sharp, self-aligns, and ready to use right out of the box. Simply place into a rounded corner, strike with a hammer, and stand back to admire your work.
  • Versatile – This corner chisel tool is ideal for a variety of uses cases: squaring hinge recesses, door hanging, framing, cabinet making, and general woodworking.
  • Size & Specs – See photos for visual measurements. Squares 3/8” radius mortises. Cutting edge measures 3/8” x 3/8”. Maximum cutting depth is 1/4". Footprint measures 7/8” x 7/8”.
  • Solid Materials – The square chisel anvil is crafted from high-speed steel (HSS), a material chosen for its superior edge retention, hardness, and toughness. The hinge chisel body is aluminum.
Check Stock

Baby Hair Clippers, Ceramic Blade Electric Kids Hair Trimmer, Ultra-Quiet Cordless Rechargeable Waterproof Haircut Kit for Kids & Adult

  • 【The Gold Ratio 28 Teeth，Safer Cutting System】 EANCEIL baby hair clipper equipped with fine cutting unit. The special 28 teeth cutting unit patent technology is different from the common 20 teeth. The technology makes it easier for this clipper to catch and cut babies' soft hair without pulling hair or scratching skin..
  • 【Specially Designed R Round Cutting unit】 Special widened R-shaped round corner design of the cutting unit, with Cullinan ceramic blade, make the outside of the cutting unit more rounded, and more sharp inside. This design allows you to give your baby a safer, efficient and comfortable haircut..
  • 【Advanced Noise Reduction Technology】EANCEIL baby hair trimmer is featured with Low Noise Technology in the precision motor. This advanced technology helps the machine works in low vibration and with working noise only about 50db. This ultra quiet feature can make your baby feel relaxed while trimming and not be afraid of hair cutting anymore..
  • 【Detachable and fully Washable】 The cutting unit is detachable, and the whole body of this baby hair trimmer is waterproof at an IPX-7 level. This waterproof hair clipper can be cleaned and work normally when its body is dipped in the water for a short time. It would be easier to tidy up....
Check Stock

Round REPLACMENT Blade Allstar As-100k Electric Rotary Mini Fabric Cutter

  • High speed ROUND BLADE knife, not hexagonal.
  • The advantage of a small blade is the improved maneuverability and its ability to cut a tight radius corner..
  • The AS100-K will cut a single ply all the way up to multiple plies up to 1/4-Inch thick..
  • for handheld round knife cutting machine.
  • REPLACEMENT BLADE FOR AS-100K & AS-100LH CUTTER.
Check Stock

HELLOCUBE QY X Man Tornado V3 M - 2022 New Magnetic Speed Cube 3x3 Stickerless - Magnetic Core Flagship Speed Cube

  • Omnidirectional Core Magnetic - Form a dual positioning with core magnetic and corner-edge magnetic. In the rotation transition, the magnet contact area is larger than the single corner-edge positioning, making the Tornado V3 significantly more stable..
  • Integrated central core design - The six faces of the cube have the same axis distance in same setting, which makes the turning more harmonious, give you a more unified experience..
  • Super corner-cutting - 17.2% improvement in reverse corner cutting compared to previous generation V2 M. Brings a smoother turning experience..
  • Structural upgrade toachieve lighter and faster - Compared to the previous generation V2 M, the Tornado V3 had its weight reduced, granting it light and fast turning..
  • Still features 125 kind of settings,5 axis distance settings,5 elasticity tensionsettings,5 magneticforce settings.
Check Stock

2 Pieces Tag Punch Corner Cutter 3 in 1 Corner Paper Punch Rounder Tag Shape Lever Action Craft Punch for Present Making DIY Crafts Projects Photo Cutter Card Making Supplies

  • What you will receive: package comes with 1 piece of 3 in 1 corner rounder punch and 1 tag shape lever action craft punch, 2 different styles of punch....
  • Size details: the compact corner rounder cutter is designed with 4 mm, 7 mm 10 mm corner radius, which are nice for paper craft projects.
  • Durable to use: the corner rounder punch is made of quality plastic shell and stainless steel cutting blade, the sturdy and durable plastic shell is....
  • Easy to use: select the required material and put it in the slot, simply push the corner of the paper inward until it is correctly placed on the....
  • Widely applied: the round paper punch can cut a clear cut from card paper, scrapbook paper, kraft paper, etc., suitable for cutting paper, photos,....
Check Stock

Jeemiter 3 in 1 Corner Rounder Punch - Hole Punch 4mm 7mm 10mm 3-Way Corner Cutter for Paper Craft, DIY Projects, Photo Cutter, Card Making and Scrapbooking Crafting Handmade Activity

  • Corner Rounder Punch 3 in 1 ： Cuts 4mm 7mm 10mm Corner Radiuses，Create perfectly finished paper crafts or scrapbooks with 3-way corner cutter..
  • Meterial is ZBS+Zinc alloy，Stainless steel cutter blade is sharp enough for ensuring precision cutting for a neat and clean appearance..
  • Perfect for regular paper, EVA foam, foil, craft paper, basically thickness less than 2MM.Please use 70G-230g paper jam. If your paper is too thin,please use 2-3 layers.do not use the Sticky paper to avoid make the punch Get stuck.
  • Easy to Operate and Simple to Use: Choose your desired material and place it into the slot. Simply push the corner of your paper inside until its properly lodged against the guides and press the handle down. The corner is now accurately and sharply rounded.
  • Suitable for cutting paper, photographs, scrapbooking, business cards or gift card. Small corner rounder punch is suit for using in office, school, home and photo studio..
Check Stock

2PCS Tag Punch + Corner Rounder Punch for Paper Crafts, CDOKY Upgraded Shape Punchers with 1.5\ 2\ 2.5\ Tag Punch and 4mm 7mm 10mm 3 in 1 Corner Punch for DIY Craft Projects,Random Color Shades

  • ...Paper Craft Tag Punch: Designed to create crisp shapes and the embossed eyelet, creating tags in 3 sizes about 1.5 inches, 2 inches, and 2.5 inches respectively, and the tags contain small holes which are convenient for your stringing or hanging..
  • Sturdy and Lasting: Made of quality plastic shell and stainless steel cutting blade, the paper punches for crafting are sturdy and serviceable, and the cutting blade is pointed enough to provide you with a precise cutting experience, serving you for a long time..
  • Inspire Creative Spirits: Suitable for DIY projects, greeting card making, art design activities and scrapbook DIY, etc. An ideal choice for parent-child and teacher-student. Compact and can be put in a bag and taken out for handwork at any time. If you have any questions, please send us a message, thank you!.
Check Stock

General Tools Crown King Molding Cutting Jig #881 with Protractor

  • 4 EASY STEPS: Perfectly mitered corner joints in four easy steps..
  • ELIMINATE TRIAL AND ERROR: Makes accurately cutting crown molding a snap, eliminating trial and error and saving time and money..
  • PROFESSIONAL GRADE JOINTS: Cut perfectly mitered interior and exterior corner joints..
  • MULTIPLE ANGLES: 45° spring angle crown molding jig with adapter for 52° and 38° angles..
  • ELIMINATES: Difficult angle calculations, coping of joints or compound-angle cutting..
Check Stock

Ecraft Paper Corner Rounder Punch: 3 in 1 (R4mm R7mm R10mm) Corner Rounder Cutter for Paper, Laminate, Photo,DIY Projects, Card Making and Scrapbooking

  • 3 IN 1 CORNER CUTTER: Hole punch is designed with 3-ways corner cutter, which 3-way corner cutter will give you 4 mm, 7 mm, 10 mm size rounded corners..
  • USABLE RANGE: It is simple to use and will make crisp, flawless cut-outs from cardstock, scrapbook paper, vellum and more. Suitable for cutting paper, photographs, scrapbooking, business cards or gift card. Small corner rounder punch is suit for using in office, school, home and photo studio..
  • SIMPLE TO OPERATE: Easy to Operate and Simple to Use: Choose your desired material and place it into the slot. Simply push the corner of your paper inside until its properly lodged against the guides and press the handle down. The corner is now accurately and sharply rounded..
  • STURDY AND DURABLE: This corner paper punch rounder is made of sturdy ABS housing and zinc alloy cutter,Cutter blade is sharp enough for ensuring precision cutting for a neat and clean appearance.Use after a period of time. Please use cooking oil. Apply a knife. Allow the cutter to be fully lubricated. This keeps the cutter sharp..
  • PAPER MATERIAL: Use high quality paper. please Use 160G-220G paper jam,basically thickness less than 2MM. If your paper is too thin. Please use 2-3 layers.Please don't use moist damp paper. This will cause not smoo....
Check Stock

Paper Corner Rounder 3 in 1 （R4mm+R7mm+R10mm）， Corner Punches for Paper Crafts， Corner Cutter ，Envelope Punch Board ，Hole Puncher， Laminate, DIY Projects, Photo Cutter,Card Making and Scrapbooking

  • 1，Corner Rounder Punch 3 in 1  ： Cuts 4mm 7mm 10mm Corner Radiuses，Create perfectly finished paper crafts or scrapbooks with 3-way corner cutter..
  • 2，meterial is ZBS+Zinc alloy，Stainless steel cutter blade is sharp enough for ensuring precision cutting for a neat and clean appearance..
  • 3，Easy to Operate and Simple to Use: Choose your desired material and place it into the slot. Simply push the corner of your paper inside until its properly lodged against the guides and press the handle down. The corner is now accurately and sharply rounded..
  • 4、Perfect for regular paper, EVA foam, foil, craft paper, basically thickness less than 2MM.Please use 70G-230g paper jam. If your paper is too thin,please use 2-3 layers.do not use the Sticky paper to avoid make the punch Get stuck.
  • 5，Suitable for cutting paper, photographs, scrapbooking, business cards or gift card. Small corner rounder punch is suit for using in office, school, home and photo studio..
Check Stock