ReviewsCorrugated Back Straight Router Bits

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

KOWOOD Plus Pattern Flush Trim Router Bit Set, 1/4 Inch Shank, Top Bearing Flush Trim Bit Kit. Cutting Height in 25/64, 3/4, 1, 1-1/2. With updated Kowood C3 Carbide. Great for trim shelf edging, veneer or laminates

  • KOWOOD Plus pattern flush trim router bit set is an upgrade router kit designed for create smooth straight edge or make a duplicate part with template..
  • KOWOOD Plus designed for Woodworking Lovers or Carpenter, provide a next-level experience..
  • KOWOOD Plus series router bits are all upgraded KOWOOD C3 carbide. This series of bits are in a heat-treated process, providing maximum durability of use..
  • Wide range of applications, suitable for dense wood, laminate, particleboard, and plywood..
  • Universal 1/4" tool holder is suitable for all major desktop router workbenches, such as KOWOOD, Bosch, DeWalt, Tooldo, Makita, Milwaukee, MNA, Porter & Cable, Skil, Ryobi, Black & Decker. (Fit for handheld router, table router or CNC)..
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

  • Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Platinumedge Router Bits Set, Tungsten Carbide Router Bits Set 1/4 Shank, Router Bit Kit for DIY, Woodworking Project, 35 Piece Set with Premium Aluminum Carry Storage Case

  • 【Sharp Carbide Tipped Router Bits】 Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood. With two cutting edges, our router bits set surpass single-edge bits in making smooth cuts..
  • 【Compatible Universal 1/4" Shank】Universal 1/4" shank is compatible with all major router instrument (either handheld or benchtop router table)..
  • 【Widely Applications】 These tongue and groove router bit set is truly versatile for your extra convenience. Perfect for edging, trimming, veining and grooving in all woodworking projects..
  • 【Durable Construction】Hardened solid alloy steel construction with a powder coating finish for durability and longevity. It is very well constructed, sturdy, and very reliable..
  • 【Well Storage and Carry Case】Comes with aluminum storage case for easy storage and organization. Sturdy and protect the bits while traveling to work. Box is marked with scale and can be placed back in the correct position after use..
Check Stock

Flytuo 6PCS 90 Degree V Groove and Round Nose Router Bit Set 1/4 Shank, Carbide 3D CNC Signmaking Lettering Engraving Router Bit, Woodworking Carving Cutting Tools

  • Durable Material&Construction: These V Groove Router Bits and Round Nose Bits, are made of high-quality tungsten steel alloy and high-tech special grinding process, whose blade has high strength and hardness, sharp and wear-resistant.
  • Precision&Neat Cuts Every Time: Including 3Pcs 90 Degree V-Groove Router Bits + 3Pcs Round Edge Groove Router Bits, smooth and no burrs, 6 pieces in total makes clean and accurate cuts on wood.
  • Versatile Woodworking Tool Kit: Complete your hardwood tool collection with 3Pcs 90 Degree V-Groove Router Bits and 3Pcs Round Nose Groove Router Bits.
  • Package Included: 3Pcs 90 Degree V-Groove Router Bits - 1/4" Shank, Cutting Diameter: 1/4", 3/8", 1/2".
  • 3Pcs Round Nose Groove Router Bits - 1/4" Shank.
  • Widely Applications: These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
Check Stock

SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

HOHXEN Finger Joint Router Bits 1/4\ Shank Drawer Lock Router Bit Reversible Finger Joint Glue Joint Router Bit Carbide Joinery Wood Milling Cutter for DIY Door Table Cabinet Shelve Furniture

  • ...blades provides increased strength and utmost resistance. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning..
  • [Multi-purpose Use] The 1/4 router bit is designed for making wooden doors, wooden frame, cabinet box mortise, ideal for creating strong finger joints for straight or 90 degree corners for small boxes and crates. The router bit is suitable for all range's router such as handheld router and table router. You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily..
  • [For Cutting Various Materials] Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Please avoid cutting ferrous metal and non wood materials,such as:steel,iron,sand,etc. The router bit is packed in a plastic box for easy storage and carry..
  • [Perfect After-sale Service] We always provide good customer service and purchase experience to our customers. We offer "24 Month" warranty on item that confirm to be manufacturer defect. If you have any questions, please email to our after-sale team, we will try our best to solve your problem..
Check Stock

SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length.
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock