ReviewsCounter Sunk Washers

Air Flow Decor 30 x 8 Return Air Grille Sidewall & Ceiling HVAC Vent Cover White Outside Dimensions 31.75 x 9.75

  • 20"w X 36"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.5" Width X 37.75" Height - SEE BELOW IN....
  • EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Install, Just Open....
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • UNRESTRICTED AIRFLOW For Your HVAC System - Noise Free Components - No Vibrating Louvers Etc..
  • QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for....
Check Stock

Trailer Bunk Glides (3' x 48') kit of 4

  • Fiberglass and aluminum boats, PWC and pontoons easily glide on and off Surfix Trailer Glides..
  • Solid High Density Polyethene ½” thick glides provide full bunk support.
  • no more uneven spaced pads to leave marks on the hull. No thin skin to break down and expose a cost saving Injection molded honey comb or understructure to grind against the hull..
  • Low profile stainless steel wide pan head screws embrace the flat deep mounting pockets. No counter sunk screws to spread the plastic and work them loose or through the material..
  • Quarter-rounded top perimeter and square base provides snug butting and a no-snag transition between glides. Start the glides at the rear most edge of the bunk the quarter-rounded top will be the first contact to slide on the hull.
  • The bright white color allows you to easily see and wash off any sand or road dirt that can scratch your hull. Sold as a kit of 4 glides.
Check Stock

24'w X 14'h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions: 25.75'w X 15.75'h]

  • 24"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75" Width X "w X 15.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE.
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment.
  • Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow.
  • Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed.
Check Stock

14 X 20 Return Air Filter Grille * - Filter Included * - Easy Plastic Tabs for Removable Face/Door - HVAC Vent Duct Cover - White [Outer Dimensions 15.75w X 21.75h]

  • 20"w X 25"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 21.75" Width X "w X 26.75" Height - SEE BELOW IN....
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment.
  • Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow.
Check Stock

Sewing Gauge 3 Piece Seam Gauges for Sewing Fabric Hem Ruler T Shape Sewing Rulers 5 in 1 Sliding Gauge Sewing Tool for Knitting Crafting Sewing Beginner Supplies, 3 Styles

  • What you will get: the package contains 3 pieces of fabric measuring rulers in different styles, including 1 piece of irregular edged gauge, 1 piece of sunk edged ruler and 1 piece of 5 in 1 T shaped gauge, sufficient to meet your different measuring needs on various occasions.
  • Double side T shape ruler: the plastic sliding gauge sewing ruler adopts a double measuring system of centimeter and inch measurement, and is painted on both sides, each side is applicable for measuring, easy to use and read numbers, so you can add the edge to fabric pattern and mark lines easily and quickly.
  • Sunk edged ruler: our sunk edged sewing gauge with sliding marker are marked in inches and centimeters, with a sunk edge and a sliding indicator, convenient to meet your different requirements, and the surfaces are smoothed so that you can get accurate measurements without replacement.
  • Wide applications: our handy gauge rulers can be applied in DIY craft activity, sewing, patchwork and so on, and bring convenience when you add seam allowances to patterns, mark lines on fabric, and mark spacing between button holes.
  • Size detail: the sewing gauges come in different sizes, the T shape gauge measures approx. 6.89 x 2.56 inch, the black ruler measures approx. 5.91 x 0.71 inch, and....
Check Stock

6 Inch Pivot Hinge for Hidden Bookcase Door, 50-60 kg (110-132 lbs) Load, Heavy Duty Hinges for Wooded Doors, 360 Degree Rotation, Stainless Steel Shaft Hinge Hardware (4 Pack)

  • 【Solid pivot hinges】50-60 kg (110-132 lbs) load capacity, 4 mm (1/8 inch) thickness, 6 inch length, 158 g (0.38 lb) per unit.
  • 【Axis rotating smoothly】The opening and closing of the hinge are silky smooth and silent.
  • 【Solid steel ball and counter sunk】Make rotation more labor-saving.
  • 【Easy installation】Comes with stainless screws (M5*20 mm).
  • 【Better protect your privacy and make home more organized】Great for hidden bookshelf/cabinet/bookcase/room/wall/closet/wooden door, etc.
Check Stock

Shogun Motorsports GSXR600, GSXR750 2011-2019 NO Cut Black Frame Sliders (1 Pack)

  • Shogun frame sliders are superior to other frame slider brands by virtue of their construction and material. Shogun pucks are made of shatter-proof UHMW infused with UV protective polymer. Shogun pucks absorb kinetic energy from crashes and will not shatter in cold temperature like some types of Delrin or fade in the sun. Each puck has a press fit aluminum bushing to hold it in place during impact to reduce the risk of the puck tearing off of the mounting point..
  • Shogun uses socket head bolts in nearly every kit, allowing for stronger frame slider design in a more compact space. Newer applications of Shogun Frame Sliders make use of a counter sunk design, which distributes the force of impact over a wider area and gives additional strength to the system so that the puck remains attached to the motorcycle..
  • Available in a 3 piece kit (bar sliders, swingarm sliders and frame sliders.). Made in the USA.
Check Stock

14 X 8 Steel Return Air Filter Grille for 1 Filter - Removable Face/Door - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions 16.5 X 9.75]

  • 14"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 16.75" Width X 10.75" Height - SEE BELOW IN....
  • EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Install, Just Open....
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • UNRESTRICTED AIRFLOW For Your HVAC System - Noise Free Components - No Vibrating Louvers Etc..
  • QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for....
Check Stock

Tang's Easy Pant Stretcher for Jeans with Aerial Aluminium Alloy Adjustable Buckle Waist Stretcher -Instant Stretch-30 to 59 inches

  • ALWAYS PRIORITY FREE 2-3 DAY SHIPPING. THIS IS THE ORIGINAL USA COUNTRY PANT STRETCHER... Over 10,000 sold... Easy to operate Pant Stretcher that will increase your pant's waist size. Made of Wood and 3/8 x 16 metal threaded rods heavily secured with counter sunk nuts in the wooden ends..
  • FOR WAIST SIZES 30" to 57"... Is your waist size smaller than 31"? I also have another stretcher listed on Amazon for waist sizes ranging from 23" to 32".
  • All metal and wood - Will Not Bend, Break or Strip threads like the plastic's do.
  • Do Your favorite Jeans shrink when you wash them? Or have you gained a few pounds in the waist?... No Problem....
  • LIFETIME WARRANTY - NO STRINGS FREE SHIPPING. We ship ASAP and you should receive 2-4 days from order date..
Check Stock

14"w X 14"h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions: 15.75"w X 15.75"h]

  • 14″w X 14″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X “w X 15.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE.
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment.
  • Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow.
  • Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed.
Check Stock

12"w X 8"h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions: 13.75"w X 9.75"h]

  • 12″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75″ Width X “w X 9.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE.
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges.
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment.
  • Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow.
  • Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed.
Check Stock