ReviewsCounter Torque

Stanley Proto J6016C 1/2-Inch Drive Ratcheting Head Micrometer Torque Wrench, 30-150-Feet Pound

  • Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale. Overall Length of Wrench is 21 inches.
  • Calibration is accomplished by manual loading the torque wrenches..
  • Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance.
Check Stock

COTOUXKER Bike Torque Wrench Set, 1/4 Inch Drive Torque Wrench 2 to 14 Nm Bicycle Tool Kit for MTB Mountain Road Bikes with Allen Key, Torx Sockets, Extension Bar

  • ...Slot Bits: 4mm and 50mm extension bar for reaching concealed bolts. Bespoke protective molded case to keep the adjustable torque wrench and tool bits stored safely, also includes ‘storage’ section inside case to store bolts when using the wrench. Reversible 72-tooth ratchet head measures torque in clockwise and counter clockwise directions. Engage and release bit installment button.
  • 【PROFFESIONAL QUALITY AND WARRANTY】 - Our bicycle torque wrench sets are fully calibrated and tested for accuracy and come with a calibration certification provided for each tool..
Check Stock

DEWALT 20V MAX Combo Kit, Compact 6-Tool (DCK620D2)

  • M18 cordless 1/2-inch hammer drill/driver with 4-pole frameless motor delivers 550 in-lbs of peak torque, 0-450/0-1,700 rpm.
  • M18 Sawzall reciprocating saw provides patented gear-protecting clutch and counter balance mechanism.
  • M18 1/4-Inch Hex Impact with 4-pole frameless motor delivers 1400 in-lbs of torque.
  • M18 work light provides a fold-away hook for hands free use and a 135-degree rotating head.
  • Also includes, two M18 XC high-capacity Red Lithium batteries, 1-hour charger, contractor bag.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

NICHE Starter Motor Assembly for Honda Foreman 450 500 FourTrax Foreman 400 31200-HM7-003 31200-HM7-A41

  • Replaces OEM Part Numbers for Honda 31200-HM7-003, 31200-HM7-A41.
  • Compatible with: Honda 1995-1996 FourTrax Foreman 400 TRX400FW, 1997-2003 Foreman 400 TRX400FW, 1998-2001 Foreman 450 TRX450S, 1998-2001 Foreman 450 TRX450ES, 2002-2004 Foreman 450 TRX450FE, 2002-2004.
  • Compatible with: Honda 2005-2011 Foreman 500 TRX500FE, 2005-2011 Foreman 500 TRX500FM, 2005-2006 Foreman 500 TRX500TM, 2007-2011 Foreman 500 TRX500FPE, 2008-2011 Foreman 500 TRX500FPM.
  • High Torque Motor Engineered to Exceed OEM Specifications.
Check Stock

Greartisan DC 12V 60RPM 7Kg.cm 8mm Single Shaft Self-Locking Reversible Worm Gear Motor with Cable, High Torque Speed Reduction Motor, Turbine Electric Gearbox Motor

  • 【High Torque & Lower Noise】: Long carbon brush high life, high precision gear design, small size, high torque, low noise, high efficiency..
  • 【Positive-Negative Rotation】This type is miniature High Torque Electric Worm Gear DC Motor, which can change shaft rotation direction while the wiring positive andnegative be changed..
  • 【Self-Locking】: Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock..
  • 【Versatile】: The reducer output shaft arranged vertically with the motor shaft, whole motor output is relatively short,can be widely used in various of occasions that require special installation size..
  • 【Application】: Boat, Car, Fan, Home Appliance, BBQ, Machinery and equipment, automation instruments, electric curtain, stage lighting, counter, faucet, safe, wet towel dispenser, vending machines, automatic monitoring and other modern art..
Check Stock

NEIKO 30128A Composite Air Impact Wrench | 1/2 Square Drive | 600 Ft-Lbs | Twin Hammer | Pneumatic Tool

  • [HEAVY DUTY]: This pneumatic impact wrench with twin hammer fastens at a no-load speed of 7, 500 RPM and delivers a maximum breakaway torque of 600....
  • [ERGONOMICS]: The ergonomically grooved pistol-type handle gun grip is designed to maintain operator control, efficiency, accuracy, and reduce fatigue....
  • [FEATURES]: The air tool has a control mechanism to easily switch between clockwise and counter-clockwise rotational torque direction to suit your....
  • [INCLUDES]: Air impact wrench kit includes a coupler fitting, allen wrench, and lubricant oil accessories for tool maintenance to keep your impact in....
  • [APPLICATION]: This tool is recommended to be used with an air compressor of 3 horsepower (HP) and 90 psi air pressure and has a 1/4” NPT air inlet....
Check Stock

Milwaukee 2694-22 M18 18-Volt Lithium-Ion Cordless Hammer Drill/Sawzall Combo Kit (2-Tool)

  • M18 cordless 1/2 in. hammer drill/driver with Milwaukee 4 pole frameless motor delivers 550 in.-lb. of peak torque at 0 - 450/0 - 1,700 RPM and 29,000 BPM.
  • M18 cordless Sawzall reciprocating saw with gear-protecting clutch and counter balance mechanism.
  • Milwaukee 2694-22 includes a carrying case for storage and tool transport.
  • Red lithium advantage:productivity: 40% more run-time, 20% more speed, 20% more torque, fade free power. Durability: Operates down to 0/-18, runs 20% cooler, up to 50% more recharges, no memory effect.
  • Includes: One M18 Compact 1/2" Hammer Drill/Driver (2607-20).
  • Two M18 REDLITHIUM XC Extended Capacity Battery (48-11-1828).
  • One M18 & M12 Multi-Voltage Charger (48-59-1812).
Check Stock

WORKPRO 1/2" Drive Air Impact Wrench, Pneumatic Heavy Duty Impact Wrench, 880ft.lb Max Loosening Torque, 7500RPM, for Changing Tires, Auto Repair, Gift for Christmas Birthday Anniversary

  • ... impact wrench is enough for all kinds of heavy-duty work, making everything easier. The rear exhaust can keep the exhaust air and any oil away from the workpiece. Average air consumption: 6.5cfm. Operation pressure: 90 PSI minimum. Note: Use sealant tape to avoid air leakage..
  • 【F/R Exchange Knob】 You can select counter-clockwise or clockwise rotation and the torque using the reverse or forward exchange knob. Adjustable torque can meet various demands of different applications like automotive repair and maintenance, and construction engineering. Note: Add oil regularly is needed for all air tools (lubricant included)..
  • 【Ergonomically Design】 At 7-1/2 inch length and weighing 4.85lbs, it’s a well-balanced tool with a comfortable and contoured handle, which makes it easy to control. The comfortable grip and ergonomic design of this Impact Wrench deliver superior handling in heavy-duty applications..
  • 【Wide Application】This 1/2-Inch Air Impact Wrench is powerful enough to let you loosen tough bolts easily, perfect for mechanical repairs, offering enough power to install and remove stubborn bolts, lug nuts, and other hardy fasteners..
Check Stock

Stens 255-212X Xtreme Electric PTO Clutch X0520

  • Cool Coil Technology, High Temperature Bearing Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Upgraded to 3 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness.
  • Specs: 1.000" Crankshaft, 6.000" Pulley, Counter Clockwise, Double A/B Belts, 125 ft. lbs. torque.
Check Stock

Maryland International Part 1

  • Cool Coil Technology, Heavy Duty "FatBoy Series" Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Upgraded to 4 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness - with Xtreme's "Integrated Diode".
  • Specs: Description: PTO Clutch, 1.125" Crankshaft, 6.3" Pulley, Counter Clockwise, A/B Belt, 200 ft. lbs. torque.
  • Replaces OEM Numbers: Bad Boy: 070-1000-00, Stens: 255-775.
Check Stock