ReviewsCountersunk Washer

LOVIMAG Neodymium Disc Countersunk Hole Magnets, Strong Permanent Rare Earth Magnets for Tool Room, Science, Craft, Office, 3 Sizes, 30 Pcs

【VERY DURABLE】Neodymium disc countersunk hole magnets are coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish which greatly increase the longevity of countersunk magnets. The application of strong magnet with hole are greatly expanded.Tolerances: ±0.2mm(±0.008 inch)..
【EASY TO USE】Round rare earth magnets can directly absorbed on magnetic material and can be fixed on non-magnetic material with screws. Neodymium magnets with holes are sturdy and reliable. When you separate the countersunk hole magnets, be careful and slide gently..
【MAGNETS DIMENSIONS】 Countersunk hole magnets combination are equipped with 3 sizes to meet your various needs. 0.31 x 0.12 inches hole 0.12 inches-10 pcs, 0.47 x 0.12 inches hole 0.16 inches-10 pcs, 0.59 x 0.12 inches hole 0.16 inches-10 pcs. Please note that the main picture is for display only, the actual size is subject to the attached picture.These strong small magnets can be fixed to non-magnetic surfaces with a screw..
【WIDE APPLICATION】Strong neodymium disc magnets with hole can be applied to tool storage, photos display, refrigerator magnets.They can also be used for scientific experiments, locker suction or whiteboard magnet..

Check Stock

LOVIMAG Neodymium Disc Countersunk Hole Magnets, Strong Permanent Rare Earth Magnets for Tool Room, Science, Craft, Office, 3 Sizes, 15 Pcs

【VERY DURABLE】Neodymium disc countersunk hole magnets are coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish which greatly increase the longevity of countersunk magnets. The application of strong magnet with hole are greatly expanded. Tolerances: ±0.2mm(±0.008 inch)..
【EASY TO USE】Round rare earth magnets can directly absorbed on magnetic material and can be fixed on non-magnetic material with screws. Neodymium magnets with holes are sturdy and reliable. When you separate the countersunk hole magnets, be careful and slide gently..
【MAGNETS DIMENSIONS】 Countersunk hole magnets combination are equipped with 3 sizes to meet your various needs. 0.31 x 0.12 inches Hole 0.12 inches-5 pcs, 0.47 x 0.12 inches Hole 0.16 inches-5 pcs, 0.59 x 0.12 inches Hole 0.16 inches-5 pcs. Please note that the main picture is for display only, the actual size is subject to the attached picture.These strong small magnets can be fixed to non-magnetic surfaces with a screw..
【WIDE APPLICATION】Strong neodymium disc magnets with hole can be applied to tool storage, photos display, refrigerator magnets.They can also be used for scientific experiments, locker suction or whiteboard magnet..

Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..

Check Stock

23 Pack Woodworking Chamfer Drilling Tool, 6pcs Countersink Drill Bit, 7pcs Three Pointed Countersink Drill Bit, 8pcs Wood Plug Cutter, with L-Wrench and Automatic Center Punch

【Professional Woodworking Set】- Woodworking chamfering drill set includes 6pcs 1/4" hexagonal shank HSS 5-edge 90 degree countersunk bit, 7pcs triangular high-speed steel countersunk bit with L-shaped wrench.
8pcs cork milling bit and 1 automatic center punch.
【Three Pointed Countersunk Drill Bit】- It's made of high-speed steel, with good wear resistance and durability, including 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm pilot holes, large chip flutes and five chamfers for speed up cutting speed and easier to discharge wood chips.
【Wood Plug Cutter】- 3/8" shank wood plug cutter bit set is made of durable carbon steel, used for tapered 1/4.

Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..

Check Stock

Gusset Commer Grade .25x1.25x8

The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.

Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..

Check Stock

Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome

Forward controls made simply and ergonomically: Flush, countersunk fasteners used for a clean, uncluttered appearance.
These controls offer outstanding good looks, are user-friendly, & provide excellent value in a moderate price range.
Standard Forward Controls, Chrome. *Not compatible with most engine guards or with stock exhaust on '08-'16 FXDF, '09-'10 FXDFSE, '10-'16 FXDWG or '14-'16 FXDL. As a guideline, we suggest the Standard Controls, P/N 9063, for riders with a 33" or shorter inseam.
Parts Included: (1) Shift Assembly, Standard Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wr....

Check Stock

uxcell M3 x 10mm Metric Hex Socket Countersunk Flat Head Screw Bolts 100PCS

Package Content: 100(+/-2%) x Countersunk Bolts.

Check Stock

Dewhel Aluminum Weighted 200 Gram JDM Manual Shifter Gear Shift Knob M12x1.25 (Red)

Custom Shift knob Will not fit automatic shifters with push button, fits gated style only.
Racing JDM Shift Knob Itself Thread Size is M12x1.25.
Fit Most Manual Transmission Vehicle. Also Works With Aftermarket Shifter. Countersunk and Reverse-Lock Out Compatible.
Large bore countersunk that sits as low as possible on a shifter and can handle the largest reverse lockouts on the market..

Check Stock

Fastcap - Black (5-Pack) - 3-1/2" x 12" Speedbrace for Granite Counter-top Support, 300 Pound Load Capacity - 08176

POWER COATED STEEL: Made of thick 3/16'' powder-coated steel.
300 POUND SUPPORT: Supports your countertop with ease.
NOT VISIBLE: Nearly invisible when installed.
COUNTERSUNK SCREW HOLES: Screw holes are countersunk into the brace for a flush installation.

Check Stock