ReviewsCpm Course 3

Mazur Instruments PRM-7000 Handheld Geiger Counter and Nuclear Radiation Monitor 0.001 to 500 mR/hr Range

Provides essential nuclear radiation awareness during a nuclear/radiological accident, event or emergency.
Detects beta, gamma and x-radiation with American made LND 713 GM tube Not recommended for testing food. Please Consider the PRM-9000.
Measurement Range 0.001 to 500 mR/hr (0.01 to 5,000 uSv/hr) with ±10% typical accuracy - gamma sensitivity: 450 CPM/mR/hr (Cs-137).
Monitors Elapsed Time, Average, Minimum and Maximum Dose Rate in uR/hr, mR/hr, uSv/hr, CPS or CPM.
LED, Beeper and Headphone Jack, Internal Data Logging, Timed Measurements, Dose Rate Alarm.

RANGE: Analog logarithmic 0-100µSv/hr and 0-10mR/hr: 3 CPM/0.03mR/h (background) and 100 counts per minute (CPM) /0.2mR/hChirps (clicks) for each gamma or Beta detected.
EASY TO USE: Simply press the button. It will immediately begin detection of Beta, Gamma, and X-ray radiation displayed on an analog meter and audible clicks that increase frequency as radiation levels increase.
TRUSTED TECHNOLOGY: RDX Radiation monitors use the same Halogen-quenched Geiger Muller detector tube (Density is 28mg/cm2) technology used in meters costing thousands of dollars more.
MADE IN USA QUALITY: ITS manufactures test products in their USA facility in an environment that allows for reproducibility, accuracy, and traceability based on good manufacturing practices. Components are tested by quality control personnel at each step and are rejected if they are outside of specifications..

CPM-S30V premium stainless steel. Blade Length - 3. 20 inch [8. 13cm]. Blade Thickness 0. 114in [2. 896mm].
Reversible tip-up deep-carry pocket clip.
AXIS-Assist mechanism with integrated safety.

Red Micarta Knife: Micarta handle for a textured gripping surface that is comfortable in the pocket or hand..
CPM-3V Steel Blade: The blade is made of high-quality CPM 3V steel, which is resistant to wear and high toughness..
Front Flipper Knife: A sleek front flipper and ball bearing pivot offers quick blade deployment while adding to the clean aesthetic appeal..
EDC Knife: It is a small folding knife, convenient for daily carrying..
Blade Length:2.8"/Overall Length:6.5"/Weight:2 oz.

One of a Kind -Japanese knifemaker Kazuyuki Sakurai specializes in folding knives, many of which are inspired by the shapes of animals. The Pochi....
Easy-to-Use Lock - One of the key features a R.I.L. lock that uses a lock bar that is integral to one of the handle scales. It locks the blade firmly....
Superior Blade Steel - The Pochi comes with a hollow-ground CPM S45VN blade. CPM S45VN is a martensitic stainless steel and its composition offers a....
Durable - At a handle length of 2.60", the Pochi has a bead-blasted titanium handle for durability..
Pocket-Friendly - The Pochi has a blue-anodized folding "tail", titanium pocket clip, and pivot-pin accent..

An all-new, solid copper handle pairs with the Leek's razor-sharp, high-performance CPM 154 blade..
Denser than steel, this Leek’s copper handle gives it a comfortable weight and will patina over time for a unique, custom look..
SpeedSafe technology makes this knife quick and easy to open with a pull back on the flipper. The reversible pocketclip enables carry on either side (tip-up or down)..
Made in the USA with premium CPM 154 powdered metallurgy steel that provides an excellent edge, corrosion resistance, and toughness. The stonewashed finish hides scratches after use..
The Leek - Copper measures 7 inches end to end when opened, 4 inches when folded, and weighs 4 ounces..

Features a fully flat ground 3.125" stonewashed S35VN blade with a gorgeous drop point shape.
Blued hardware, and a steel lockbar insert.
Great companion for any hiker, landscaper, backpacker, hunter, wilderness guide, electrician or anyone in need of a reliable everyday carry knife.
Handle Material:Titanium/Blade Material:CPM-S35VN/Weight:3.74 oz(0.23 pounds).
Overall Length:7.24 inch(18.40cm)/Blade Length:3.13 inch(7.95cm).

Your purchase includes One Xerox WorkCentre DNI Color All-in-One Printer | 1Cyan, 1Magenta & 1Yellow cartridge of 1,000 print capacity, 1Black cartridge of 1500 capacity | Documentation CD, Installation Guide, Power & Fax cord.
Printer dimensions – 16.5” W x 19.9” D x 19.7” H | Printer Weight – 67.7 lbs. | Scan up to – 37 ipm (black) & 21 ipm (color) | Duplex copy feature up to – 9 cpm (black) & 8cpm (color) | Please refer to product documents for more specifications.
With just a few simple steps your multifunction printer is ready to scan or print directly to or from the cloud, Scan to Email, FTP, Network or somewhere more down to earth - like the integrated front and rear panel USB ports.
Our latest color touchscreen interface offers an app-based, tablet-like user experience with gestures and multi-touch interactions, Customize it to match your workflow and navigate with intuitive, smartphone-like swipes and gestures.

Sleek drop point-styled blade and 3D machined titanium handle.
Flat, clean spine with ambidextrous double thumb studs silky smooth opening action.
Includes a microfiber polishing cloth and a camo zipper pouch with the T1 Uli folder.
Handle Material:Titanium/Blade Material:CPM-S35VN/Weight:4.30 oz(0.27 pounds).
Overall Length:7.55 inch(19.18cm)/Blade Length:3.20 inch(8.13cm).