ReviewsCpvc Elbow 45 Degree

Lisle 19632 Oil Funnel Adapter Holder Base

• The Spill-Free Funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance.
• 45 degree elbow allows use on radiator caps that are placed at an angle.
• For more information check the main Lisle tool- 24680.

Camco 39080 Rhino Blaster Sewer Tank Rinser

• Direct jet allows water stream to rinse and flush RV sewer systems.
• Rhino Blaster Tank Rinser firmly attached to RV sewer outlet via bayonet swivel fitting.
• Vacuum breaker averts backflow into water hose.
• Clear 45 degree elbow allows direct flow of water into sewer system.
• Break-resistant polyethylene is sturdy and durable.

Lisle 19912 Multi-App Oil Funnel Set 14pc

• The 1.6 qt. translucent funnel comes with seven different color-coded adapters and a 45 Degree elbow to work on many applications and save valuable....
• Tethered lid and cap keep the funnel clean.

Sharkbite 24632LF 45° Hose Bibb 1/2" x 3/4" Multi Turn

• INSTALLS IN SECONDS: 1/2 inch x 3/4 inch threaded hose bibb valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
• PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
• COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
• QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
• RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.

NIBCO C4806 2 HXH 45 ELBOW PVC White, 2 Inch

• 45-degree elbow for connecting two pipes at an angle.
• Hub ends for connecting to male unthreaded pipes or fittings.
• PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
• Smooth interior finish for reduced friction and material buildup.
• Meets specifications ASTM D2665 and D3311 for quality assurance.

Stainless 2.5' 45° Mandrel Bend Elbow - 1.5D/3.75' CLR Loose Radius - 16GA/.065' Wall - No Leg - SS304

8Pcs Universal Aluminum Intercooler Piping U-Pipe Black Kit with T-Bolt Clamps and Black Coupler (8Pcs 2.5 Inch)

• 2.5 Inch Upgrade Replacement Performance Turbo Charged Kit Made of High Quality Light Weight T6061 Aluminum.
• Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI).
• Perfect for All Turbo DIY Project,Increases Up to 65% Air Flow Compared to Standard Bent Piping.
• Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement.

Spears 817 Series PVC Pipe Fitting, 45 Degree Elbow, Schedule 80, 2' Socket

• 45-degree elbow for connecting two pipes or fittings at an angle.
• Socket ends for connecting to male pipes or fittings.
• PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
• Maximum operating temperature of 140 degrees F.
• Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Red)

• 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
• 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
• 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
• 4.Made of stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance.
• 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.

Eaton Aeroquip 2043-6-6S 90 Degree Bulkhead Union Elbow JIC 37 Degree End Types Carbon Steel 3/8 JIC m End Size 3/8 Tube OD

• Bulkhead 45-degree elbow to connect two tubes through a panel and change tube direction by 45 degrees.
• Male JIC threads at both ends for connecting two threaded tubes.
• Carbon steel for tensile strength and hardness.
• Standard duty for light to medium pressure applications.
• Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

• 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
• 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
• 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
• 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
• 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..