ReviewsCpvc Fitting

Christy's Handy Pack: Wet Or Dry Conditions Medium Body PVC Cement and Purple Primer, 1/2 Pint (8 fl oz)

Sets and cures quickly in wet/dry conditions for easy, efficient use.
Cement works without a primer for non-pressure systems up to 6" and with pressure systems below 4".
Designed for a variety of applications including PVC pipe and fitting, potable water, pressure, non-pressure, conduit, drain, duct, DWV, and sewer.
Both products are low-VOC for a pleasant working experience.
Purple Primer aggressively softens the surfaces of PVC and CPVC pipe and fittings - Form a complete pipe joining solution.

Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

Clear Primer, NSF listed (National Sanitation Foundation).
Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
Low VOC (volatile organic compound) solvent cement.
A clear aggressive primer for use on PVC and CPVC pipe and fittings.
Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.

Check Stock

PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315″ Hex Shaft, For Water Lines, Drain Lines, Vent Lines

Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It is works great for Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
Compatibility: PVC fitting saver come with 0.315″ hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..

Check Stock

iSpring AHPF12MNPT12X2 WSP50GR Reusable Spin Down Sediment Water Filter 50 Micron with Hose White

High impact stainless steel mesh filter screen rated at 50 Micron. Double threads on both ends: 1 inch MNPT and 3/4 inch FNPT, 1/4" flush out fitting....
Two 12 inch 3/4'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC....
Flushable and reusable, takes considerable workload off finer filters that follow behind it.
helps create a multi-layer gradient filtration system for....
The steel mesh filter cartridge and housing can be easily cleaned by rotating the scraper, saving time and effort on routine maintenance..
Lifetime support from iSpring in Alpharetta, GA at (678) 261-7611.

Check Stock

PVC Fitting Saver with 1-½-Inch and 2 Inch Head Aluminum, PVC Pipe Reamer, PVC Socket Saver with 0.315" Hex Shaft, For Water Lines, Drain Lines, Vent Lines

Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It works great on Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
Compatibility: PVC fitting saver come with 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..

Check Stock

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz.

J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.

Check Stock

SharkBite U2016-0000LFA Check Valves, 3/4-Inch

For use with OD controlled copper, CPVC or PEX pipe.
No soldering, clamps, unions, or glue required..
Connects copper, PEX, and CPVC pipe in any combination..
Designed for vertical and horizontal installation.

Check Stock

Husky 5/8 in. Junior Tube Cutter

Husky 1-1/4 in. ratcheting PVC cutter cuts up to 1-1/4 in PVC (1-5/8 in. O.D.) for cutting PVC, CPVC, PP, PEX, PE, rubber hose.
Husky flexible tube cutter cuts PVC, CPVC, PEX pipe and flexible pipe.
Comes with foldable pouch for storage and transportation.

Check Stock

Disconnect Clip Set for Pipe Fitting - Push Fitting Tool for Slip Removal - Disconnect Clip Removal Tool Set - 1/2", 3/4", 1/4", 3/8" and 1" Slip Fitting Removal Tools (Pack of 5)

: This push fitting removal tool does not require any additional materials or equipment for the installation process. Achieve a connection devoid of leakages in mere seconds..
- : This TigerBite plumbing tool can be used for a variety of different pipes. Whether you need to work on copper tubing, PEX fitting or CTS CPVC, this tool will work without any issues..
: The package of plumbing tools you receive includes a 1” disconnect clip, 1/4” disconnect clip, a ¾” disconnect clip, a 3/8” disconnect clip, as well as a ½” disconnect clip and a push-fit installation tip..
: With the help of this lead-free TigerBite plumbing tool set, you can re-use fittings and valves and even rotate the fixtures so that you can reassemble them to install them in tighter places..
: TigerBite fittings are certified up to 93 degrees Celsius and can be used at 200 PSI. They are also certified to ANSI/NSF T61 and ASSE 1061..

Check Stock

iCrimp Push-to-Connect,Push-fit Disconnect Tool for Brass-Push Fittings Removing,Multi-size Combination 1/2 ,3/4 ,1 -CRQ01

「VERSATILE TOOL」With one tool allows 1/2”,3/4”,1” Push-to-Connect to be disconnected from the copper, CPVC, or PEX pipe, no extra....
「REMOVES IN SECONDS」Simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly..
「DURABILITY」Constructed of high-quality carbon steel with corrosion resistance ensures reliable functionality and long service life..
「ERGONOMIC DESIGN」Wide handle with dipped grips reduce fatigue and one-handed operation design to allow your free hand the ability to assist in....
「VERSATILITY」It's compatible with regular Push-fit/Push-to-Connect brass fittings..

Check Stock

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml Pack Of 3

J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC....

Check Stock